Makita RT0700C
Diamond Core Bits & Milling Cutters1913
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Overall Length Metric: 60
 |
Ideal for producing nosings and attractive edge moulds. Beads Ref. 9/10 has a matching cutter Ref. 8/10 for jointing & hinging. Specifications • Shank Diameter: 1/4 • Dia Metric: 19 &bull more→; Cut Length Metric: 22 • Overall Length Metric: 54 • Radius 1 Metric: 3
 |
Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball groovers. Specifications • Shank Diameter: 1/2 more→• Dia Metric: 12.7 • Dia2 Metric: 6.5 • Overall Length Metric: 58 • Radius 1 Metric: 6.35
 |
Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as red more→uced downtime. Use in fixed head, NC or CNC routers only. Use on MDF, HDF, hard natural timber, veneered and laminated particle board, plywood, hardboard and solid laminate. Single flute with TC plunge tip. For MDF, hardboard & solid laminate. Single flute prevents edge lines. Can be serviced for extended life. High wear resistance. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • …
 |
Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperi more→al: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 57 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4
 |
Cut a wider edge line, at an angle of 60 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications • Shank Diameter: 1/4 more→• Dia Metric: 29 • Cut Length Metric: 13 • Overall Length Metric: 55 • Angle: 60
 |
The Trend Solid Tungsten Carbide two flute cutters are turned milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. They more→offer better plunge cutting characteristics than TCT.Dimensions:
 |
Trend Craft Pro 1/4in shank bearing guided round over router cutter - 6mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber more→and timber based materials. Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. 6mm radius ideal for lighter round over and Ovolo detail or bullnosing on thinner stock. 1/4in shank for smaller routers and easy control for hand held use. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to …
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
