Metabo KFM 9-3 RF 601751700
Diamond Core Bits & Milling Cutters1505
 |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximat more→e 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38.1 • Overall Length Metric: 106 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2
 |
The IRWIN® Hex Countersink drills, countersinks and counter bores in one step. Its 4-cutter countersink and tapered drill bit provide superior speed and ideal finish. Ideal for both soft and hard more→woods.1 x IRWIN® Hex Countersink 10mm.Additional Information:&bu
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/4 more→• Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 7.9 • Cut Length Imperial: 5/16 • Overall Length Metric: 48.5 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56.5
 |
The two bearings supplied offer the means of cutting different depths of mouldings. Specifications • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Metr more→ic: 18 • Overall Length Metric: 65 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 16
 |
Trend Craft Pro 1/2in shank bearing guided chamfer cutter - 51mm diameter Two Flute Carbide tips. 1/2in shank with 19.1mm cutting depth for heavy duty work, architectural joinery and general chamferi more→ng work. 45¡ bearing guided chamfer profile follows straight and curved profiles for crisp, professional detailing work on an edge. Ideal for table use to cut mitred corner joints for box making work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length M…
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 35 • Overall Length Metric: 81
 |
These cutters are for Trend Craft Dovetail Jigs. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 20 • Overall Length Metric: more→60 • Angle: 98
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
