Metabo WE 17-125 Quick 600515000
Cutting Discs226
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
The Marcrist CK850 AkkuMAX Extreme Speed Diamond Tile Blade is engineered for rapid, precise cutting of ceramic tiles, porcelain, and other hard materials. Designed with advanced diamond technology, t more→his blade delivers exceptional cutting speed without compromising on quality. Optimised for cordless tools, the CK850 AkkuMAX is lightweight and efficient, extending battery life while ensuring consistent, high-speed performance. Its turbo-segmented design enhances airflow and cooling, reducing heat buildup and allowing for longer continuous use. Suitable For • Ceramics • Granite and Natural Stone • Marble • Natural Stone Tiles • Mosaic Tiles • Porcelain Features & …
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
DeWalt's Laser welded Diamond Cutting Disc is manufactured using advanced bond technology which increases blade productivity and operating life. The blade has a layer of pre-alloyed metal which enclos more→es the diamond creating a pellet that is held more securely and distributed better within the segment. Specifications • Diameter: 125mm • Bore: 22.2mm • Thickness: 2mm • Performance: Extreme • Applications: Cutting Features and Benefits • Pre-alloyed metal layer • Laser welded segments • High quality, low carbon steel core • For use with corded and cordless angle grinders
 |
The Turbo Viper – Tva Diamond Blade Is Recommended For Dry Cutting Of Hard Materials Such Asgranite, Rustic Tiles, Klinker, Refractories, Slate And, Of Course, Porcelain Tiles. The Specific Design Of more→The Diamond Rim Of The Tva Diamond Blade By Rubi Offers Faster Cutting Speed In The Hardest Materials Without Sacrificing The Quality Of The Finish.Features
 |
Bevels tubes as they cut and lasts longer than conventional cutting wheels.Features
Wire & Cup Brushes323
 |
Price from £17.95 up to £20.49
Compare prices4→Compare prices and buy Lessmann Conical Bevel Brush 100mm x M14 Bore, 0.35 Steel Wire
The special shape of the bevel brush enables the user to work in hard to reach places. They have been designed for heavy-duty use, for the preparing of metal surfaces before painting, and the removal more→of slag, rust, scale, or concrete waste. Diameter: 100mm. Width: 10mm. Bore: M14. Wire Gauge: 0.35. Wire Type: Steel STA Crimped. Max. R.P.M.: 12,000.
 |
Price from £5.49
Compare prices3→Compare prices and buy BlueSpot Crimped Steel Wire Cup Brush 100mm M14 Thread
The BlueSpot Tools Steel Wire Cup Brush is manufactured from hardened steel wire for increased durability. Ideal for preparing metal surfaces for welding and painting.This BlueSpot Tools Steel Wire Cu more→p Brush has the following specifications: Wire: 0.3mm.Diameter: 100mm (4in) / M14 x 2 Fitting.Max. Safe Speed: 8500 RPM.Additional Information:&bu
 |
Price from £25.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 22mm 6mm Shank
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 22mm.Wire: 0.35 Steel.Additiona
 |
Price from £16.95
Compare prices4→Compare prices and buy Bosch X Lock Knotted Wire Wheel 115mm X-Lock
Aggressive Cleaning on Metal - The X-LOCK Heavy for Metal Wire Wheel provides an aggressive cleaning performance. It is fitted with knotted wire that makes it perfect for heavy-duty cleaning applicati more→ons on small metal surfaces. It is suitable for use with X-LOCK angle grinders. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Price from £12.45 up to £15.95
Compare prices5→Compare prices and buy Bosch Conical 0.35mm Inox Crimped Wire Wheel 100mm M14 Thread
Extra-Fine Finish - The Clean for Inox Bevel Brush provides an extra-fine surface finish. Its conical bevel brush is fitted with crimped wire for light- to medium-duty cleaning applications in hard to more→reach areas, making it ideal for the cleaning of smaller areas at high circumferential speeds. The brush can be used on stainless steel, aluminium or non-ferrous metal surfaces and on edges or in grooves. It is also suitable for removing rust, roughing, matt sanding, paint stripping and removing annealing colour on welded seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are …
 |
Price from £8.95 up to £14.99
Compare prices4→Compare prices and buy Faithfull Wire Brush Shaft Mtd 70 X 25Mm 0,30Mm, Multi FAIWBSI70
Industrial Wire Cup Brush for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Max. Cutting Speed: 12 more→,500 rpm.Shaft: 6mm (1/4in). Features: 6mm shank For cleaning paint or deburring moulds or castings For cleaning paint or deburring moulds or castings Suitable for hard-to-reach areas Can be used in industrial power tools at higher speeds Specifications: Dimensions: H:12.5 x W:5.0 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBSI70
 |
Price from £4.49 up to £4.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 60mm M14x2, 0.30mm Steel Wire FAIWBC60
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indus more→trial use and more specialist applications.
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
