RC Design RC-34 7,5x17/5x108 ET44 DIA65,1

LMA wheel studs are for converting hubs that usually use wheel bolts to attach a wheel. Once fitted the wheel stud protrudes from the hub so you can fit the wheel quicker and easier, the wheel being h more→eld in place with wheel nuts. Available in a choice of lengths and several thread diameters and pitches to suit most applications.The stud has a stop to prevent the stud being wound in too farAllen key hex to allow easy tightening without gripping the stud and causing thread damageThe hub side has a taper on the end of the thread to make cross threading very unlikely10.9 Carbon steel construction, Ideal for Motorsport use, and other demanding applications

Grayston Wheel Bolts are available in a large range of thread and fitting options to suit most vehicle and wheel fitments. These bolts are ideal for when fitting non standard wheels to a vehicle where more→a longer length bolt or one with a different seat is required.Ideal for fitting non original wheels to a vehicleWide range of thread length and seat typesZinc plated steel for corrosion resistanceOptions explainedLoose 60 Degree and Loose Radius seat options refer to the bolt having a separate seating washer.Variable 60 Degree bolts allow for variation in wheel PCD's (Eg 108/110mm or 98/100mm). This allows wheels with a slightly different PCD to be fitted to the car.Length is measurement of

These wheel nuts from Grayston are specifically designed to fit classic Wolfrace slot mag wheels which require a sleeve fitting with a tapered washer.Available in different thread options:Option 1: 1/ more→2" UNF thread with 11/16" (17.4mm) OD sleeveOption 2: M12 x 1.5 thread with 41/64" (16.3mm) OD sleeveOption 3: 7/16" UNF thread with 11/16" (17.4mm) OD sleeveOption 4: 3/8" UNF thread with 41/64" (16.3mm) OD sleeveOption 5: M12 x 1.25 thread with 41/64" (16.3mm) OD sleeveOption 6: M12 x 1.5 thread with 11/16" (17.4mm) OD sleeveOption 7: 7/16" UNF thread with 41/64" (16.3mm) OD sleeveOption 8: M14 x 1.5 thread with 11/116" (17.4mm) OD Sleeve