Stanley FatMax FMEG220
Cutting Discs232
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
Aluminium oxide, depressed centre disc for electric and air tools. Suitable for metal grinding applications.
 |
Reliable Performance in Inox - The X-LOCK Standard for Inox Cutting Disc delivers reliable performance in Inox. Its thin disc edge supports smooth and easy cutting. In addition, the disc is free from more→ferrous, sulphurous and chlorinated fillers. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º the most efficient results are achieved. For use with a variety of machines mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
Extra-Clean Cuts in Porcelain - The Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain. Its turbo rim is designed to achieve neat results in all kinds of ha more→rd ceramics, while the optimised diamond matrix delivers chip-free cuts. Use this disc for cutting ceramic, porcelain and fine stoneware. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Clean Cuts in Porcelain • Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain • Turbo rim for neat results in all kinds of hard ceramics Specifications Diameter: 125mm Bore diameter: …
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mm Features and Benefits • Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in …
 |
Aluminium oxide flap disc for descaling rust removal weld preparation weld cleaning and general surface preparation. Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad. Depressed centre disc suitable for electric and air tools.Ø125mm Aluminium Oxide Flap Disc Ø22mm Bore 40Grit• Aluminium oxide flap disc for descaling rust removal weld preparation weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: Ø125/22mm.• Model No. FD12540EModel No: FD12540E:Bore: Ø22mm:Brand: Sealey:Disc Size: Ø125mm:G&helli
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
Wire & Cup Brushes304
 |
Price from £3.18 up to £3.95
Compare prices6→Compare prices and buy Sealey SFBS50 Flat Wire Brush Stainless Steel Ø50Mm Ø6Mm Shaft
Flat wire brush with crimped stainless steel filaments Ø50mm width and a Ø6mm shaft.Ø50mm Flat Wire Brush Ø6mm Shaft• Flat wire brush.• Crimped stainless steel filaments.• Shaft: Ø6mm.• Width: Ø50mm. more→• Maximum Speed: 4500rpm.• Model No. SFBS50Model No: SFBS50:Brand: Sealey:Diameter
 |
Price from £23.90 up to £26.95
Compare prices5→Compare prices and buy Lessmann 472.21X X-Lock Steel Knot Wheel Brush 115Mm Non Spark LES47221X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting they can be used for polishing light deburring work and removing rust paint dir more→t and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses car workshops and by staircase railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Steel Knot Wheel Brush 115mm Non SparkPTDLES4722
 |
Price from £22.25 up to £24.95
Compare prices5→Compare prices and buy Lessmann 473.211 Knot Wheel Brush 125 X 14Mm 22.2Mm Bore 0.50 Steel Wire LES473211
The Lessmann Knot Wheel Brushes are for grinders angle grinders and stationary machines used in the preparation and re-working of bolt fillet and butt welds. They remove scale rust paint slag ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 125mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12 500/min.PTDLES4
 |
Price from £14.77 up to £16.95
Compare prices5→Compare prices and buy Lessmann 482.214 Knot Cup Brush 65Mm M10X2.0 0.50 Steel Wire LES482214
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting and the removal of slag rust scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M10.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12 500.PTDLES48221
 |
Price from £5.92 up to £14.99
Compare prices6→Compare prices and buy Faithfull Conical Wire Brush 115 X M14X2 0,5Mm, Multi FAIWBTC115
Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cutting Speed more→: 12,500 rpm. Features: For use on s/less steel & heavier duty applications For use with angle grinders For use with angle grinders Maximum speed: 12,500 rpm Specifications: Dimensions: H:13.2 x W:3.8 x D:12.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBTC115
 |
Price from £6.42 up to £13.99
Compare prices6→Compare prices and buy Faithfull Wire Cup Brush 75Mm Xlock, Green FAIWBC75XL
This X-LOCK Crimped Wire Cup Brush is suitable for light to medium-duty applications when working with steel. The brush is ideal for removal of paint, coatings and general surface preparation of stain more→less steel. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Features: X-LOCK quick change system for fast change between tools 0.3mm crimped steel wire 0.3mm crimped steel wire Ideal for removal of paint, coatings and surface prep Specifications: Dimensions: H:11.5 x W:6.0 x D:9.5 cm Colour: Green Guarantee:5 years Material: Metal Model Number: FAIWBC75XL
 |
Price from £3.49 up to £4.95
Compare prices6→Compare prices and buy Draper 41433 Brassed Steel Crimped Wire Cup Brush 75Mm each 1
This wire cup brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck.PTDDRPDIR
 |
Price from £14.95
Compare prices5→Compare prices and buy Bosch X Lock Crimped Brass Wire Cup Brush 75mm X-Lock c
Extra-Fine Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire, Brass-Coated provides an extra-fine surface finish. Fitted with brass-coated crimped wire for light-to-medium
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
