Stanley FatMax FMEG225VS
Cutting Discs207
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
Lasts up to 4x longer than a standard multi material diamond discOn modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The Expert MultiMate more→rial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer.The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity.This mix of optimum diamond grits and advanced design …
 |
It is compatible with angle grinders. This product is intended for use in concrete as well as natural and artificial stone. The high level of balance provides vibration-contr
 |
Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 125mm • Thickness: 1.3mm • Arbor: 22.23mm
 |
The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with de more→manding applications while delivering good results. Moreover, the disc's precision-manuf
 |
The Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials. Its diamond matrix is engineered for cutting various construction components, resulting in more→well-formed cutting edges. These high-qualitity standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc when cutting building materials such as concrete and masonry. Pack of 1 • Reliable Cuts in Universal Building Materials • Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials • Diamond matrix is engineered for cutting various construction components and well-formed cutting edges Specifications: …
 |
The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is intended for work on stone. For u more→se with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.Straight&
Wire & Cup Brushes186
 |
Price from £3.49 up to £4.89
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:D
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £25.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 22mm 6mm Shank 454278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 22mm.Wire: 0.35 Steel.Additiona
 |
Price from £9.99 up to £26.99
Compare prices7→Compare prices and buy Bosch 0.5mm Knotted Steel Wire Cup Brush 75mm M14 Thread 1608622029
The Wire Cup Brush offers a good coarse surface finish. It is fitted with knotted wire for heavy-duty cleaning applications on steel. This brush is suitable for removing heavy rust, underseal, paint o more→r varnish. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with a 6-mm shank.Wire cup brush – knotted wireSuitable for heavy duty cleaning work on medium to large metal surfaces, such as removing heavy rust, underseal, paint or varnish.Appropr
 |
Price from £7.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 100mm 6mm Shank 1609200273
The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealing colour on welded seam more→s. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with 6-mm shank.Wire …
 |
Price from £3.66 up to £5.99
Compare prices6→Compare prices and buy Draper Rotary Wire Brush, 6 x 100m
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £8.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 12mm 6mm Shank LES451162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mm.Wire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £5.95
Compare prices4→Compare prices and buy Makita 3 Piece Wire Brush Set D-66070
Designed for use with power tools, this set contains three types of wire brush - cup, wheel and end. All brushes have a 6mm (1/4") straight shank and can be used at a maximum RPM of 4,500. Specificati more→ons • Shank: 1/4" Straight • Pack Quantity: 3 • Max RPM: 4500 rpmFeatures & Benefits• Cup type: light duty for removing coatings, rust, and cleaning • Wheel type: light duty for removing coatings, rust, and cleaning • End type: light duty for working on hard to reach areas (pipes and profiles)
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
