Cooler Master MasterLiquid Lite 240 (MLW-D24M-A20PW-R1)
 | Outdated Product Cooler Master MasterLiquid Lite 240 is an interesting two-section CBO, which belongs more to the middle price segment, however, in terms of workmanship and cooling level, it is not far behind the market leaders. This is largely due to the fact that Cooler Master engineers forgot about decorative elements, focusing on design. In particular, the SVO radiator turned out to be larger and heavier than its counterparts, the fitting clips are made of nickel, and the hoses are braided with a soft but dense braid. The all-in-one design follows classic lines and includes a 240mm long metal radiator that connects to a fluid block and fluid pump via multiple hoses. Heat dissipation from the heatsink is performed by a pair of 120mm sleeve bearing fans with traditional PWM speed control for such product...s (note: in the range from 650 to 2000 rpm). Depending on the speed of rotation, the level of noise emitted by it can range from 15 to 30 dB. Thus, with the help of fine tuning, the owner of the CBO can achieve the optimal balance between the cooling efficiency of the processor and the level of noise emitted by the system. Given these characteristics and the lack of backlighting, the MasterLiquid Lite 240 liquid cooling system will be the best option for gamers and overclocking enthusiasts who do not really care about visual aesthetics and an abundance of backlighting. |
Cooler Master MasterLiquid Lite 240 120 mm 240 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cooler Master MasterLiquid Lite 240 is an interesting two-section CBO, which belongs more to the middle price segment, however, in terms of workmanship and cooling level, it is not far behind the market leaders. This is largely due to the fact that Cooler Master engineers forgot about decorative elements, focusing on design. In particular, the SVO radiator turned out to be larger and heavier than its counterparts, the fitting clips are made of nickel, and the hoses are braided with a soft but dense braid.
The all-in-one design follows classic lines and includes a 240mm long metal radiator that connects to a fluid block and fluid pump via multiple hoses. Heat dissipation from the heatsink is performed by a pair of 120mm sleeve bearing fans with traditional PWM speed control for such products (note: in the range from 650 to 2000 rpm). Depending on the speed of rotation, the level of noise emitted by it can range from 15 to 30 dB.
Thus, with the help of fine tuning, the owner of the CBO can achieve the optimal balance between the cooling efficiency of the processor and the level of noise emitted by the system. Given these characteristics and the lack of backlighting, the MasterLiquid Lite 240 liquid cooling system will be the best option for gamers and overclocking enthusiasts who do not really care about visual aesthetics and an abundance of backlighting.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Cooler Master 2026 - new arrivals, bestsellers, and the most relevant models Cooler Master.
1 0 0 7 |
High quality build, easy installation. There is no unnecessary noise. It has been working steadily for 4 months, without any complaints. Everything was packaged normally, it was easy to install, even the ready-made holes for the air defense system were in the case, well, that’s all. No installation problems. and I don’t have a single complaint about the work, it works quietly, both coolers remove heat normally and the water circulates quietly but efficiently, the processor rarely reaches 80 degrees, usually around 70-75, I have an i7. Not yet use Cooler Master MasterLiquid Lite 240 few months |
I advise you to pay attention to it, the material of the case is normal, 2 coolers rotate quickly and remove heat, and the water flows quickly and maintains a good temperature of the processor, much more efficient than a regular cooler, and even more profitable in price. I know the problems with work, you can even overclock the processor Price, work there are none use Cooler Master MasterLiquid Lite 240 few months |
Purchased for r5 3600 with a TDP of 65W, idles at 50 degrees under load 75. When the PC is turned on, the pump and the liquid itself make a lot of noise. The copper plate is terribly made, very rough which hinders proper contact. The thermal paste included is quite alright, but the liquid cooler itself is not that great. Copper plate, thermal paste included Rough plate, noisy pump, you can hear the water flow which creates the feeling that a leak is about to occur. use Cooler Master MasterLiquid Lite 240 few months |
Just install
A complete water cooling system consisting of a two-section radiator and pump. Ready to install and work out of the box and does not require any special skills to assemble. Unlike the MasterLiquid 240 model, the connecting hoses are wire-braided, which eliminates bending inside the body.
Compound
The pump is made of plastic, with swivel fittings for easy installation of the water block on the processor and hose laying. The pump rotor MTBF is a solid 70,000 hours of continuous operation or 8 years. Like all water cooling systems, an aluminium radiator is used as a heat exchanger, consisting of 14 flat channels and corrugated tape between them to cool the liquid.
Maximum airflow
MasterLiquid Lite 240 can be installed on any modern Intel or AMD socket. The mounting frame on the radiator has room for four 120mm fans, two in the front and two in the back. Two complete fans with anti-vibration pads and noise level should not exceed 30 dBA, as the manufacturer claims.
Findings. This CBO has a presentable appearance. It is worth noting the braiding of cables and hoses, which maintains a single design style. Easy to install and compatible with any socket. Quiet and efficient PWM fans.