Deepcool Frame black (DP-MATX-DPFRAME)
 | Outdated Product Form factor: Mini Tower; Mount: vertical; Motherboard support: micro-ATX; PSU form factor: ATX (regular); Dimensions (mm): 354x175x392; Weight (kg): 2.9; Material: steel; 5.25" bays: 1; 3.5" bays: 3; internal 2.5" compartments: 3; Expansion slots: 4; Fans (back): 1х92mm; Fans (front): 1x120mm |
 |
Save space and money
Until recently, the most compact cases Deepcool were Smarter and Smarter LED (the second is equipped with a pair of luminous fans). Now, in addition, they have come out with an even more compact, conservative design and, which is especially nice, a cheap Deepcool Frame case. It is intended for both mini-ITX miniature motherboards and medium format micro-ATX motherboards. Large format ATX is not supported.
Weak blowing
The power supply is placed full-sized and mounted on top, thereby participating in the air circulation inside the PC, which partially compensates for the lack of complete fans. But for hot builds (with a 100+ W processor and a 200+ W graphics card), we still advise you to buy a couple of propellers: 12 cm for the front and side panels and 8 – 9 cm for the back.
Will fit a lot
A processor cooler can fit less than 145 cm high. Simply put, a large tower will not fit, but a small one a la Thermaltake Contac 21 is quite enough. There are two seats for 2.5-inch SSDs, three for 3.5-inch HDDs, and theoretically two for 5.25-inch DVDs, but there is only one cutout on the front panel (a strange decision). A nice bonus are as many as three USB ports on the front panel (only one of them is USB 3.0) and a built-in card reader. Given all of the above, we recommend Deepcool Frame for building inexpensive and not very hot PCs based on mini-ITX and micro-ATX motherboards.
