Deepcool Matrexx 50 MESH 4FS black (DP-ATX-MATREXX50-MESH-4FS)
 | Outdated Product £119.04 Another bright representative of inexpensive and high-quality cases. The model belongs to the initial border of the middle price category, while the case has a powerful cooling system and a tray for the E-ATX motherboard. The system unit is factory-equipped with four fans on board. These are branded impellers on a hydrodynamic bearing. Such turntables provide solid cooling under the condition of minimal noise. Computer case Deepcool Matrexx 50 MESH 4FS stands out with an unusual front panel. Mesh inserts are fixed on the plastic frame. The front surface has a clearly visible relief pattern in the form of three rectangles, which are located one above the other. The chassis has good potential for creating a powerful graphics system. 370 mm falls to the share of the graphics card, and heat re...moval from the processor can be implemented with a tower up to 160 mm high. The lower location of the power supply corresponds to modern trends in computer fashion. Additionally, in the lower tier there is a rack for two 3.5″ HDDs, which can be moved forward if necessary if the power supply does not fit into the bay. |
 |
Another bright representative of inexpensive and high-quality cases. The model belongs to the initial border of the middle price category, while the case has a powerful cooling system and a tray for the E-ATX motherboard. The system unit is factory-equipped with four fans on board. These are branded impellers on a hydrodynamic bearing. Such turntables provide solid cooling under the condition of minimal noise.
Computer case Deepcool Matrexx 50 MESH 4FS stands out with an unusual front panel. Mesh inserts are fixed on the plastic frame. The front surface has a clearly visible relief pattern in the form of three rectangles, which are located one above the other. The chassis has good potential for creating a powerful graphics system. 370 mm falls to the share of the graphics card, and heat removal from the processor can be implemented with a tower up to 160 mm high. The lower location of the power supply corresponds to modern trends in computer fashion. Additionally, in the lower tier there is a rack for two 3.5″ HDDs, which can be moved forward if necessary if the power supply does not fit into the bay.
