Einhell Classic TC-US 400 150 mm / 375 W 230 В (4419255)
 | Outdated Product Machine: grinder; Rotation modules: 2; Work part: disk / belt; Motor power (W): 375; universal; Disc diameter (mm): 150; Disc speed (rpm): 1450; Belt length (mm): 915; Belt rotation speed (m/min): 276; hook-and-loop fastening system; |
We recommend products in stockBench Grinders & Polishers Einhell →
grinder, 380 W, 1500 rpm, sharpening: universal, disk: 150 mm, width ленты 100 mm, length 914 mm
grinder, 250 W, 2850 rpm, sharpening: universal, disk: 125 mm, width ленты 25 mm, length 762 mm
bench grinder, 250 W, 2850 rpm, 130 rpm, sharpening: universal, disk: 150 mm, 200 mm, wet processing
Einhell Classic TC-US 400 150 mm / 375 W 230 В | ||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Einhell 2026 - new arrivals, bestsellers, and the most relevant models Einhell.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Einhell 2026 - new arrivals, bestsellers, and the most relevant models Einhell.
Series Einhell Classic
bench grinder, 250 W, 2980 rpm, 134 rpm, sharpening: universal, disk: 150 mm, 200 mm, wet processing
hammer drilling, 4600 bpm, without a hit, 990 rpm, chiselling, 950 W, 3.5 J, consistent speed, weight 4.5 kg
screwdriver, variable, 200 rpm, 1 speed, cartridge: bit holder, reverse, power supply: battery, 3.6 H, 1.3 Ah, built-in
450 W, up to 2650 rpm, cartridge key, spindle (quill): overhang 104 mm, move 50 mm, base incline
random orbital, 425 W, saw blade 125 mm, 6000 – 13000 rpm, frequency 12000 – 26000 opm, amplitude 2.5 mm, speed controller, dust collector
combo grinder, 350 W, 2980 rpm, sharpening: universal, disk: 150 mm, width ленты 50 mm, length 686 mm
hammer drilling, 4000 bpm, without a hit, 850 rpm, chiselling, 900 W, 3 J, weight 4.1 kg
drill driver, gun, 550 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, motor brake, power supply: battery, 18 H
Device for home workshop. Sand something for 5-10 minutes, trim it, remove a chamfer, etc. Then rest. I got used to using the smallest tape I have (600 grit) to sharpen the cutters and chisels. The cutting edge does not overheat due to its relatively slow speed. It does everything it's supposed to do well. A somewhat tedious replacement of the sanding belt. After about 12-15 minutes under load, the motor heats up. It needs to rest for the same amount of time. Noisy. |
Add Review