Catalog   /   Sound & Hi-Fi   /   Headphones   /   Fostex

Fostex TH-610

Photos - Headphones Fostex TH-610
Videos 8Photos 4
Outdated Product
Design: overhead, closed; full size Over-Ear; Connection type: wired; Jack (6.35 mm); Cable supply: double-sided; Cable length (m): 3; Detachable cable; Impedance (Ohm): 25; Frequency range (Hz): 5 – 45000; Sensitivity (dB): 98; Speaker size (mm): 50; Weight (g): 375;
add to listmy lists
Fostex TH-610
Type:full size (over-ear)
Connection:6.35 mm
Frequencies:5 – 45000 Hz
Sensitivity:98 dB
All specifications
Specifications TH-610
Colour
Connection and design
Designoverhead, closed
full size Over-Ear
Connection typewired
ConnectionJack (6.35 mm)
Cable supplydouble-sided
Cable length3 m
Cable typeround
Detachable cable
Specs
Impedance25 Ohm
Frequency range5 – 45000 Hz
Sensitivity98 dB
Speaker size50 mm
Emitter typedynamic
General
Weight375 g
Added to E-CatalogJuly 2016
E-Catalog UK editor, Headphones
Olexandr Cherkashchenko, edited 08.04.2026
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Fostex 2026 - new arrivals, bestsellers, and the most relevant models Fostex.

Popular questions

Verified today, Olexandr Cherkashchenko

Do the Fostex TH-610 get hot during long listening sessions?

The fit is relatively loose, and the 375 g weight is distributed by the dual headband, so pressure usually does not become the main issue. However, the closed-back synthetic leather ear cups can make your ears warm during extended listening, especially in a warm room.Source:SpecificationsExpert reviewsUser Reviews

Can the cable be replaced?

The Fostex TH-610 has a detachable cable, but the earcups use 2-pin connectors with a model-compatible pinout. The standard 3 m cable terminates in a 6.3 mm plug, so any third-party short or balanced cable must be selected specifically for the TH-610.Source:SpecificationsExpert reviews

Can the ear pads be replaced?

Fostex TH-610 ear pads are consumable parts and should be replaced as they wear out. The manufacturer recommends wiping them with a dry cloth after use to reduce the effects of sweat and skin oils and extend their service life.Source:General information

Do you need an amplifier for the Fostex TH-610?

A separate amplifier is not required: the 25-ohm impedance and 98 dB/mW sensitivity provide adequate volume from many DAC/amp units and players. To connect to a standard smartphone, you will need a 6.3 mm-to-3.5 mm adapter or another compatible cable.Source:SpecificationsUser Reviews

Do the Fostex TH-610 isolate noise well?

For closed-back headphones, the isolation is moderate: broadband attenuation of external noise is approximately 15 dB. Music is less audible to those around you, but they do not completely block out loud traffic or a noisy office.Source:Expert reviewsUser Reviews

Are they suitable for bass enthusiasts?

The Fostex TH-610 deliver deep, well-controlled bass with good attack, but are not tuned for deliberately boosted low frequencies. They are better suited to those who value control and bass-line clarity than to fans of pronounced bass impact.Source:Expert reviewsUser Reviews
Video reviews
Additional features headphones Fostex TH-610:
  • Maximum input power — 1800 mW
  • Carrying and storage case included