Frime Vision without PSU
 | Outdated Product Low-cost case in Midi Tower format, on board of which there are three fans with 120 mm impeller at once. At the same time, regular coolers have a monotonous ring illumination. The manufacturer offers the Frime Vision case with the following backlight shades: green, blue and red. The mid-sized chassis is ready to accommodate an ATX, microATX, or Mini-ITX motherboard. The processor tower is limited to a height of 150mm, video length must not exceed 280mm. Three 3.5″ areas are allocated for computer system memory and there is still room for two 2.5″ devices. Like the front panel, the viewing sidewall is made of acrylic, which made it possible not only to reduce the cost of the case, but also made it extremely light. The platform weighs only 3.8 kg. The standard cooling system can be supplemen...ted with another 92 mm impeller. The seat of the additional fan is located at the rear. Air is taken in through the side ventilation channel on the front panel. The top cover has a perforation, which is covered with a filter with a magnetic base. Auxiliary ventilation duct significantly improves air exchange. The I / O panel has: three USB ports (one 3.0 and a couple 2.0), audio jacks (3.5 mm), power button and indication. |
 |
Low-cost case in Midi Tower format, on board of which there are three fans with 120 mm impeller at once. At the same time, regular coolers have a monotonous ring illumination. The manufacturer offers the Frime Vision case with the following backlight shades: green, blue and red. The mid-sized chassis is ready to accommodate an ATX, microATX, or Mini-ITX motherboard. The processor tower is limited to a height of 150mm, video length must not exceed 280mm.
Three 3.5″ areas are allocated for computer system memory and there is still room for two 2.5″ devices. Like the front panel, the viewing sidewall is made of acrylic, which made it possible not only to reduce the cost of the case, but also made it extremely light. The platform weighs only 3.8 kg. The standard cooling system can be supplemented with another 92 mm impeller. The seat of the additional fan is located at the rear. Air is taken in through the side ventilation channel on the front panel. The top cover has a perforation, which is covered with a filter with a magnetic base. Auxiliary ventilation duct significantly improves air exchange. The I / O panel has: three USB ports (one 3.0 and a couple 2.0), audio jacks (3.5 mm), power button and indication.
