Protherm Panther 30 KOV 28.8 kW
 | Outdated Product A performant wall-mounted double-circuit gas boiler with microprocessor control and an open combustion chamber. Relatively high thermal power (28.8 kW) allows you to organize uninterrupted heating of country houses, cottages, utility and small industrial premises up to 230 m². In addition, it provides hot water with a flow rate of up to 14.4 L / min, provided that the water is heated at 30 °C. The hot start function is supported, which guarantees an accelerated supply of hot water with a temperature of up to 60 °C, which is safe for children. It should be noted that the Protherm Panther 30 KOV boiler is designed for installation in separate boiler rooms and cannot be placed in residential areas. For its stable and safe operation, a constant supply of fresh air and a complete chimney system...are required, the geometry of which must strictly comply with the rules prescribed by the manufacturer. There is a function for selecting operating modes: winter, summer, vacation. Equipped with high-quality modulating burner made of high-alloy stainless steel, circulation pump with automatic speed change, 3-way valve and 10-liter closed expansion tank with automatic air valve. |
Protherm Panther 30 KOV 28.8 kW
24.6 kW
28.8 kW
Energy source:gas
Mount:wall, dual-circuit
Boiler power:28.8 kW, area ~ 230 m²
Combustion chamber:open
DHW temperature:from 38 °С, up to 60 °С
A performant wall-mounted double-circuit gas boiler with microprocessor control and an open combustion chamber. Relatively high thermal power (28.8 kW) allows you to organize uninterrupted heating of country houses, cottages, utility and small industrial premises up to 230 m². In addition, it provides hot water with a flow rate of up to 14.4 L / min, provided that the water is heated at 30 °C.
The hot start function is supported, which guarantees an accelerated supply of hot water with a temperature of up to 60 °C, which is safe for children. It should be noted that the Protherm Panther 30 KOV boiler is designed for installation in separate boiler rooms and cannot be placed in residential areas. For its stable and safe operation, a constant supply of fresh air and a complete chimney system are required, the geometry of which must strictly comply with the rules prescribed by the manufacturer. There is a function for selecting operating modes: winter, summer, vacation. Equipped with high-quality modulating burner made of high-alloy stainless steel, circulation pump with automatic speed change, 3-way valve and 10-liter closed expansion tank with automatic air valve.
All specifications
Specifications Panther 30 KOV
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2026 - new arrivals, bestsellers, and the most relevant models Protherm.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2026 - new arrivals, bestsellers, and the most relevant models Protherm.
I have a four-room apartment with autonomous heating; the developer supplied an ultra-budget pseudo-German boiler; they are actually assembled in China. If the Chinese managed to cope with the heating at the very least, and also heated water for the kitchen and one of the bathrooms, then with the second shower everything was very sad, the water from the tap was lukewarm. As a result, I installed a more powerful Protherm Panther boiler, assembled in Slovakia. Compared to the Chinese, only enthusiastic impressions: the radiators are hot, after renovation in the kitchen I also connected a heated floor to the boiler, hot water is in all the bathrooms and it heats up quickly, you don’t have to wait half a minute for it to heat up, as was the case with the Chinese, the water flows literally 5-7 seconds after turning on the boiler. I noted the advantage of electronic control, the Panther is controlled by buttons, very convenient. I also installed a thermostat, now the boiler maintains the set temperature in the apartment, and does not just heat the radiators. I don’t understand why some developers install bad and cheap boilers, because people still have to replace them at their own expense... powerful, heats water quickly so far nothing to complain about use Protherm Panther 25 KOV few months |
I'll share my opinion about the Panther 25 KOV wall-mounted boiler. It's been in use for a little over 2 years, I bought it in the fall of 2016 from an official dealer. I got the boiler for heating a private house made of aerated concrete with an area of 220 meters, and with the help of the Panther, I was able to completely solve the heating and hot water issue. I specifically wanted a compact dual-circuit boiler so as not to spoil the bathroom renovation by installing an additional boiler (there was no other place to put it). The Panther operates almost silently, and if you get used to it a bit, it's not noticeable at all, quieter than a refrigerator. I liked the convenience of adjustments and settings, just a couple of buttons, easy to master. I also appreciated the display with bright backlighting, all necessary information is easy to read. I additionally installed a temperature sensor, so now the boiler maintains the set temperature in the rooms. Besides saving money, it's pure convenience, if the weather changes outside (for example, gets colder), there's no need to immediately tweak the settings, the boiler does everything automatically. Everything is also good with hot water. Some people say they don't have enough water and suggest getting a boiler, but that's nonsense, the Panther provides more than enough water. In my opinion, this is one of the best wall-mounted boilers on the market, offering the optimal combination of price and functionality. dual-circuit, economical no use Protherm Panther 25 KOV month or more i recommend it should buy |
Add Review
We recommend
gas, condensing, power 20 kW, area ~ 160 m², wall, dual-circuit, closed, heating: up to 160 m², warm floor mode