Pulsepad PSW-1200
 | Outdated Product A car inverter is a device for converting 12 V direct current into 230 V alternating current with a frequency of 50 Hz, as in a household electrical network. The "bundle" of the Pulsepad PSW-1200 inverter and a car battery can be used to power a load with a total power of 1200 W (short pulsed load surges up to 2400 W are allowed). The output signal, which has the form of a regular sine wave, is suitable for powering electricity consumers that are demanding of current quality: modern household appliances, circulation pumps, gas boilers with sensitive sensors, etc. The inverter has a small display showing the current load and output current characteristics, as well as an audible signal with which the device reports that the battery is too deeply discharged. There are two standard sockets and...one USB-A connector for connecting the load. It is possible to connect a wired remote control via the RJ-45 port. The inverter's safety is ensured by built-in protection systems (against overheating, overload, short circuit and incorrect wiring). |
Pulsepad PSW-1200 | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
A car inverter is a device for converting 12 V direct current into 230 V alternating current with a frequency of 50 Hz, as in a household electrical network. The "bundle" of the Pulsepad PSW-1200 inverter and a car battery can be used to power a load with a total power of 1200 W (short pulsed load surges up to 2400 W are allowed). The output signal, which has the form of a regular sine wave, is suitable for powering electricity consumers that are demanding of current quality: modern household appliances, circulation pumps, gas boilers with sensitive sensors, etc.
The inverter has a small display showing the current load and output current characteristics, as well as an audible signal with which the device reports that the battery is too deeply discharged. There are two standard sockets and one USB-A connector for connecting the load. It is possible to connect a wired remote control via the RJ-45 port. The inverter's safety is ensured by built-in protection systems (against overheating, overload, short circuit and incorrect wiring).
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Pulsepad 2026 - new arrivals, bestsellers, and the most relevant models Pulsepad.
Before purchase, I was very worried that the inverter wouldn't handle the claimed 1200W of steady load. I ordered from the official supplier with payment upon receipt. Went to the post office for the item with my car battery, a set of consumers with a total power of up to 1200W, and measuring instruments haha. During testing at the post office, under my full load, the inverter beeped periodically but held on. I think it beeped due to strong voltage drop of the lead-acid battery. In the end, I decided to take it. At home, I connected it to a proper LiFePO4 battery, and the inverter easily handled my 1200W without beeping. The question of the reliability of the internal components and circuitry remains open. It matches the stated characteristics. The price. The display is just gorgeous: informative - with lots of different symbols, bright, colorful - almost every symbol has its own color. External 12V terminals on the case have M6 threads - they heat up significantly under maximum load. The power wires are somewhat short - about 300-400 mm, longer ones would be preferable.  Fanshtorm: use Pulsepad PSW-1200 less than month |