Zanussi ZSLN 2211 (911 075 034)

PerfectFit facade fixing system

Fully built-in dishwasher Zanussi ZSLN 2211 44.6 cm wide is a new generation of machines of the 20 series, which embodies the latest trends in this class of equipment. The model holds up to 9 sets of dishes, which are located in the upper and lower baskets, as well as a small basket for cutlery. The device received a PerfectFit front panel slider mount with a forward offset when the door is opened, due to which it does not require modification of the base so as not to scratch the floor. The Aqua Stop anti-leak system allows you to leave the car unattended for a long time and eliminate the troubles associated with the bay of neighbors. The one-time consumption of water and electricity for the economic cycle is 10 L and 0.778 kW, respectively, which gives average annual consumption figures for this type of device of 2772 L and 222 kWh (class A +). And an additional opportunity to save on energy consumption will be provided by the connection to the DHW system (up to 60 °C).

Intensive wash Extra Power

On the control panel there are several signal light indicators and functional buttons for power supply, delayed start (3 hours) and selection of washing programs. Separate buttons are provided for the AutoSense automatic programme, which, thanks to built-in sensors that evaluate the degree of loading of the machine, adjusts the parameters to save water and energy, as well as the Extra Power intensive washing function, which increases the duration and temperature of the cycle. In addition to the automatic programme, the device allows you to run pre-rinse, economy, quick (30 minutes), daily (90 minutes) cycles and the self-cleaning programme of the Machine Care inner chamber. When getting acquainted with the list of programs and available functions, we immediately note the absence of a delicate glassware washing cycle and the impossibility of using combined tablets, which is a drawback of the model.

AirDry — post-drying with open door

The basic settings for water hardness and rinse aid are medium values that can be changed when setting up the machine. In addition, the control panel allows you to activate the auto-opening of the door, button sounds and the acoustic signal for the end of the cycle, which are turned off by default. The AirDry air drying function, when the door is automatically opened at the final stage, handles with its task three times more efficiently than traditional condensation drying in a closed chamber. And sensors that monitor the purity of water in real time allow you to automatically change the duration of washing programs.