DeWALT DCH775X2

This is the Makita cold chisel 17mm hex shank. These are perfect for working on concrete, demolition, render or chasing. Symmetrical head-geometry with centring-tip for optimised results in the event more→of reinforcement. Features & Benefits • Good cutting performance • Cost effective • Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement • Application: Concrete, demolition, render, chasing • Forged and tempered cold chisel Specifications • Shank: 17mm A/F • Pack Quantity: 1 • Diameter: 17 mm • Overall Length: 450 mm

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in more→a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø14 x 235mmDimensions: Length: 10mm x Height: 305mmWeight: 0.138KgWarranty: Consumable

Rotabroach Raptor cutter set. Ideal for drilling into mild & structural steel. Maximum cutting depth 25mm. Contents • RAP120 12mm Diameter Cutter • RAP140 14mm Diameter Cutter • RAP18 more→0 18mm Diameter Cutter • RAP220 22mm Diameter Cutter • RAP240 24mm Diameter Cutter • SRA25 Pilot Pin • 19mm / 3/4" Weldon Shank

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar more→and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Bahco 9629-SET-8 Flat Drill Bit Set for Wood (8 Piece) The Bahco 9629-SET-8 is an 8 piece flat drill bit set with a range from 12mm to 32mm. They all have 1/4 inch / 6.35mm shanks and are made from he more→at-treated high carbon steel.  Features:
- Flat bit drill for wood
- Quick-change hex shank 6.35 mm
- High-carbon steel, heat-treated overall
- Hardened blade forged directly from the round shaft
- Lacquered for rust protection
- Flat bit with positive cutting angle for faster drilling than with conventional bits Contains:
- 8 x Drill bits in sizes: 12 - 16 - 18 - 20 - 22 - 25 - 28 - 32mm

Engineered to tackle tough materials, the Rotabroach hole cutter ensures smooth, accurate cuts through steel, stainless steel, and other hard metals. The carbide tips maintain sharpness longer than tr more→aditional cutters, providing consistent, reliable performance and reducing the need for frequent replacements. The cutter's advanced design minimises vibration and reduces operator fatigue, ensuring a more comfortable and efficient cutting experience. Its robust construction and superior materials ensure longevity and optimal performance, even in demanding conditions. Features & Benefits • Ideal for construction steel, stainless steel, high strength steel • Tungsten carbide tips harder …

Easy Loosening of Ground - The SDS max Excavation Chisel delivers easy loosening of heavily compacted soil and ground to make digging possible. Its rounded and pointed blade design ensures maximum pre more→cision. It is compatible with SDS max shank systems. Fits all SDS max rotary hammer drills. Features and Benefits • Easy Loosening of Heavily Compacted Soil and Ground • SDS max Excavation Chisel delivers easy loosening of heavily compacted soil and ground to make digging possible • Rounded and pointed blade design ensures maximum precision Specifications Total length: 400mm Chisel cutting edge: 110mm Shank, shape: SDS max

High Material Removal Rate - The Pointed Chisel delivers a constantly high material removal rate due to its self-sharpening feature. The special star shape at the working end retains the shape of the more→accessory to prevent work interruptions. The chisel is intended for use in concrete and brick for mortising and demolition work, including restoring joints and clearing reinforcements. It is compatible with a 28 mm hex shank system for hammers. The self-sharpening Pointed Chisel offers a 30% higher material removal rate compared to standard pointed chisels. With 28 mm hex shank for breakers. Features and Benefits • Constantly High Material Removal Rate and No Work Interruptions • Pointed …

The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a prec more→ision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 20mm.Additional Information:• Chisel Type: Bevel Edge• Size (mm): 20

Stanley 0-16-870 Dynagrip Bevel Edge Chisel 6mm The Stanley 0-16-870 6mm chisel is part of the Dynagrip range which is available in numerous sizes. It features a lacquered blade for corrosion resistan more→ce and an ergonomic soft-grip CAB handle for comfort and control. It is designed for intensive use, with a steel striking cap for increased striking efficiency. Features:
- Blade Lacquered for corrosion protection
- Ergonomic soft grip CAB handle for comfort and control
- Forged high Chrome-Carbon steel Blades for edge retention
- Longer handle design for shock/shatter resistance in use
- Manufactured in Sheffield, England
- Pre-sharpened blade – ready for immediate use
- Specifically ma…

Various Demolition Applications - The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by more→the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. It is compatible with a 30 mm hex shank system for hammers. Flat Chisel provides standard chiselling for various demolition applications in concrete and brick With 30 mm hex shank for breakers. Features and Benefits • Standard Chiselling in Concrete and Brick for Various Demolition Applications Specifications Total length: 400mm C…

The DeWalt SDS Max Steel Flat Chisels are made from toughened steel which ensures tough bits. They also feature micro-processor controlled heat treatment for consistently tough, long-life and have a f more→lat end. Features & Benefits • Wide range of product offerings for the most common concrete demolition jobs • Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life Specifications • Width: 25mm • Length: 400mm • Shank: SDS Max • Pack Quantity: 1