DeWALT DWE627KT
Diamond Core Bits & Milling Cutters1130
 |
Trend Trade Straight Cutter - 15mm diameter 15mm diameter x 25mm cut length for heavy duty slotting grooving and rebating with templates, side fences or in a router table using a 1/2in shank router. more→Centre tip design for drilling and stopped cut applications for premium results in all materials. High quality micro-granular tungsten carbide cutting edges for maximum performance and durability on laminate, chipboard, ply, MDF and solid timber. K mark shank to ensure safe working practices. Supplied in a storage tube for maximum protection when transporting from job to job. Specifications • Shank Diameter: 1/2 • Dia Metric: 15 • Cut Length Metric: 25 • Overall Length Metric: …
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/2 more→• Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 51 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8
 |
Trend Craft Pro 1/2in shank bearing guided round over router cutter - 12.7mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all tim more→ber and timber based materials. Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. 12.7mm radius will cut full bullnose profile for detailing work on 1in/25mm stock. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications • …
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 1.5 • Cut Length Metric: 6 • Overall Length Metric: 43
 |
A range of small sized panelling cutters. Ideal for veining and fluting applications. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metri more→c: 7.5 • Overall Length Metric: 48 • Radius 1 Metric: 4.8
 |
Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 9.5mm diameter X 12.7mm cutting depth bearing guided trimmer for flush trimming of lamin more→ate and veneer work. Double shank mounted bearings for increased surface contact for additional stability and control. Useful all rounder for trimming and for templating work to form rebates and to replicate thinner workpieces. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Double bearings for stability. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 12.7 • Cut Length …
 |
Precise fit and long service life thanks to high-grade carbide tips, optimised cutting geometry and a precision-groun
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/2 • Dia Metric: 6 more→.3 • Dia Imperial: 1/4 • Cut Length Metric: 16 • Overall Length Metric: 69
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
