Makita DGA504RTJ3
Cutting Discs228
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.This Faithfull …
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grad more→e steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 125mm.Additional Information:• Diameter (mm): 125• Bore Diameter (mm): 22.23
Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonde more→d for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Medium 60 GritBore 22.23mm Additional Information:• Diameter (mm): 127• Grit: Medium
• General-purpose flat cutting discs recommended for use with Sealey and other leading makes of grinding and cutting power tools.General-purpose flat cutting discs recommended for use with Sealey and more→other leading makes of grinding and cutting power tools.• General purpose flat cutting discs recommended for use with Sealey and other leading makes of grinding and cutting power tools. • Model No. PTC/125CTechnical Specification:Bore: ø22mmDisc Size: ø125 x 3mmNett Weight: 0.09kgDimensions: Length: 125mm x Height: 15mmWeight: 0.04KgWarranty: Consumable
CK850 blades are described as having one of the Fastest Tile Cuts EverFeatures:- Marcrist diamond products comply with every known safety standard worldwide- Titanium coated diamonds provide self cool more→ing and self sharpening cutting edge- Armoured centre for blade strength beyond belief (Patented)- Precision engineered core, hardened, ground, balanced and tensioned- Noise suppression for semi silent operation (Patented)- Ulta thin diamond edge guarantees lighting fast cutting- Segments are formed under vacuum and extreme pressure and fused to the corde. This results in a extreme bond homogenity and adhesion for outstanding performance and safetyMaterials:- Tiles- Marble & Slate- GraniteSpecifications:Diameter …
Bulk pack of Makita thin metal cutting discs for angle grinders. Specifications • Diameter: 125mm • Bore: 22.23mm • Thickness: 1.2mm • Pack Quantity: 100 Features and Benefits &b more→ull; Thin metal cutting discs • Flat centre • Bulk pack of 100 Contents • 100 Discs • Storage Tub
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-friable aluminium oxide grit is tough and wear- more→resistant for extensive metalwork. The disc's carrier plate is available in angled and straight versions, manufactured from fibreglass material. Changing flap discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-changing system on the market. Also fits nut and thread angle grinders. Features and Benefits • Long Life • X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications • High-quality zi…
Wire & Cup Brushes321
Price from £17.08 up to £18.95
Compare prices4→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 80mm M14 x 2.0 Thread LES424177
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diameter.80mm.Wire Height. 22mm.Bore. M14.Wire Gauge. 0.35.Wire Type. Steel.Max. R.P.M. 8,500.Additional Information:• Diameter (mm): 80• Thread: M14• Wire: 0.35 Steel
Price from £8.95
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 75mm 6mm Shank LES43013307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07: Wire: 0.35 Steel, Diameter: 75mm.430.126.07: Wire: 0.25 Brass, Diameter: 50mm.The Lessmann DIY Cup Brush has the following specification: Wire: 0.35 Steel.Diameter: 75mm.Max/Min: 4.500.Additional Information:• Diameter (mm): 75• Wire: 0.30 Crimped Steel
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank 2608622115
Coarse Finish on Steel - The End Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it id more→eal for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results Cylindrical shank …
Price from £17.95 up to £22.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 150 X M14 X2 0,30Mm FAIWBC150
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For cleaning metal surfaces prior to painting M14 thread mount M14 thread mount Specifications: Dimensions: H:18.0 x W:10.5 x D:16.0 cm Colour: Red Guarantee:5 years Material: Metal Model Number: FAIWBC150
Price from £4.95
Compare prices3→Compare prices and buy BlueSpot Bevelled Crimped Steel Wire Cup Brush 115mm M14 Thread 19220
The BlueSpot Tools Steel Bevel Wire Cup Brush is manufactured from hardened steel wire for increased durability. Ideal for preparing metal surfaces for welding and painting. Specifications: Wire: 0.3m more→m.Diameter: 115mm (4 1/2in) / M14 x 2 Fitting.Maximum safe speed: 12,500 RPM.Additional Information:• Diameter (mm): 115• Thread: M14• Wire: 0.3mm Steel
Price from £10.95 up to £15.99
Compare prices4→Compare prices and buy Faithfull Flat Wire Brush 125 X 12 X 22,2Mm 0,5Mm FAIWBCT125
Circular Wire Brush, compatible with 125mm (5in) angle grinders with a 22.2 mm (7/8in) bore standard angle grinder flange plate. Twist knot brushes are suitable for the removal of slag, rust, scale or more→even dried cement. Conforms to ISO9001 and DIN EN1083-1 and 2. Max. Cutting Speed: 12,500 rpm. Features: For heavier duty applications Compatible with 125mm angle grinders with a standard flange plate Compatible with 125mm angle grinders with a standard flange plate Maximum speed: 12,500 rpm Specifications: Dimensions: H:15.5 x W:2.5 x D:13.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBCT125
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622022
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium-duty cleaning applications. It is suitable for removing coatings and more→rust and for cleaning formwork boards and facings. Ideal for use on steel surfaces, this brush is also suitable for roughing, mat sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Cylindrical shank compatible with three-jaw drill chucks.…
Price from £2.10 up to £2.49
Compare prices6→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 13mm
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
Power Tool Batteries & Chargers18
Price from £298.95
Compare prices4→Compare prices and buy Makita DC18SF LXT 4 Port Li-ion Battery Charger
The Makita DC18SF is a four-port multi charger for charging multiple LXT 14.4V/18V Li-ion batteries. Specifications • Battery Voltage: 14.4 - 18v • Battery Type: Makita Li-ion • Input V more→oltage: 240v UK Mains Features and Benefits • Able to charge two 14.4V/18V Li-ion batteries at a time • Able to charge one or two 3.0Ah Li-ion batteries in 60 minutes • Able to charge four 3.0Ah Li-ion batteries in 120 minutes • Easy to see charging display • Can be stored in gang box neatly without wasting space • Compact design for easy to hold under arm/ carry with the optional shoulder strap • Can be fastened to the wall with four screws
102.99Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
FEATURES:- Battery type: Ni-Cd / Li-Ion- Voltage: 12 - 18 V- Charging time 1,3 / 2,0 / 3,0 / 4,0 / 5,0 Ah: 15 / 24 - 30 / 22 / 36 - 60 / 45 min- Type: DC18RE- Weight: 1,1 kg- Dimensions: 164 x 190 x 106 mm
104.39Buy!
£
£
MachineMart.co.uk
Delivery: to United Kingdom
Report
The Makita DC18RD is a two port fast charger that is able to charge two Makita slide style Li-ion and Ni-MH batteries (with adapter) at the same time, as fast as DC18RC charges one battery.
Price from £17.79 up to £57.90
Compare prices2→Compare prices and buy Makita Dc18rc 18v Battery Charger
Features:Quick charger.Battery voltage:14.4 to 18 V.Display of charging level.Ensures long battery life thanks to active cooling.Charging time 1.3 Ah:15 min.Charging time 2.0 Ah:24 min.Charging time 3 more→.0 Ah:22 min.Charging time 4.0 Ah:36 min.Charging time 5.0 Ah:45 min.Charging time 6.0 Ah:55 min.Suitable for:Makita.DBO180Z, DCL181FZW, DCM501Z, DCO181Z, DDA350Z, DDF453RFE, DDF453SYE, DDF453Z, DDF456Z, DDF458Z, DDF459RF4J, DDF482Z, DDF483RFJ, DDF484Z, DDF485RTJ, DDF485Z, DFR550Z, DFS452Z, DF457DWEX6, DF457DWLX1, DGA452Z, DGA504RTJ, DGA504Z, DGA505Z, DGA506RTJ, DGA511RTJ, DGA511Z, DGA513RTJ, DGA514ZJU, DGA517RTJ, DGA519RTJ, DGA519Z, DGA519ZJ, DGA900Z, DHK180ZJ, DHP446Z, DHP453RFE, DHP453SYE, DHP453Z,…
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.