Makita GA4530 (156515)
Cutting Discs270
 |
The Marcrist MR350 Mortar Raker Diamond Blade is specifically designed for efficient and precise removal of mortar between bricks, blocks, and other masonry surfaces. This blade ensures fast, clean, a more→nd accurate raking of mortar joints, making it an essential tool for repointing and renovation work. With high-quality diamond segments, the MR350 offers superior cutting performance, even in the toughest conditions. Its robust construction minimises wear, extending the blade’s lifespan and maintaining its sharpness over prolonged use. The optimised segment design allows for smooth, vibration-free operation, reducing fatigue and increasing productivity on the job site. Suitable For • Breeze Bl…
 |
The Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety. The disc is composed of high-quality silicon carbide and resin specifically designed for work on s more→tone with impressive results. The disc's precision-manuf
 |
• Zirconium flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wi more→th epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
This premium-quality ceramic alumina provides the ultimate performance with the longest life and fastest cutting rate across all abrasives. It has a self-sharpening feature which increases high stock more→removal and durability. The strong plastic backing allows increased flexibility and fast cutting action on medium to high pressure applications. The M14 connection allows for the quick changing of discs. The plastic backing can be trimmed to extend service life. Designed for contoured and flat-edged surfaces. Ideal for sanding, grinding, removing rust and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders including Stock …
 |
Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-fr
 |
Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 80 Grit.Additional Information:&bu
Wire & Cup Brushes218
 |
Price from £12.92 up to £16.39
Compare prices6→Compare prices and buy Draper Twist Knot Wire Cup Brush, 80mm, M14
Manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. M14 thread. Carton packed.
 |
Price from £13.99 up to £16.95
Compare prices6→Compare prices and buy Bosch X Lock Crimped Stainless Steel Wire Cup Brush 75mm X-Lock
Extra-Fine Finish on Inox - The X-LOCK Clean for Inox Cup Brush, Crimped Wire provides an extra-fine surface finish. Fitted with crimped wire for light-to-medium
 |
Price from £6.95 up to £7.56
Compare prices6→Compare prices and buy Sealey Twist Knot Wire Flat Brush Ø75mm with Ø6mm Shaft
• Twist knot flat wire wheel.• Stainless steel.• Shaft: ø6mm. • Width: ø75mm.• Max Speed: 12000rpm.Twist knot flat wire wheel, ø75mm width and a ø6mm shaft.• Twist knot flat wire w more→heel. • Stainless Steel. • Shaft: ø6mm. • Width: ø75mm. • Max Speed: 12000rpm. • Model No. TKFBS75Technica
 |
Price from £4.49 up to £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 70mm 6mm Shank
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £17.95 up to £23.36
Compare prices7→Compare prices and buy Draper Expert Crimped Wire Cup Brush, 80mm, M14
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £6.49
Compare prices3→Compare prices and buy BlueSpot Twist Knot Wire Cup Brush 100mm M14 Thread
BlueSpot Tools Twist Knot Cup Brushes are manufactured from hardened steel wire for increased durability. Twisted steel filaments provide quick and efficient cleaning action. Ideal for removal of dirt more→, paint, rust, scale, slag, concrete and other hardened materials.This BlueSpot Tools Twist Knot Cup Brush has the following specifications: Diameter: 100mm (4in) / M14 x 2 Fitting.Max. Safe Speed: 8500 RPM.Additional Information:&bu
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 100mm 6mm Shank
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 100mm • Wheel Thickness: 12mm • Shank Diameter: 6m
 |
Price from £7.52 up to £8.40
Compare prices6→Compare prices and buy Sealey Conical Wire Brush Ø115mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
