Makita GA5030X5
Cutting Discs267
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
The Standard for Inox Cutting Disc is a reliable choice for working on Inox. The disc is made of aluminium oxide specifically designed for use with Inox. It is free of ferrous, sulphurous and chlorina more→ted fillers. Use this disc for cutting Inox. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. It is compatible with Bosch angle grinders.Straig
 |
Diamond Stone DiscFeatures:- For Extremely Hard Stone Such As Granite Or Reinforced Concrete.- Excellent Cutting Speed Thanks To The Speed Stripes For Less Side Friction.- Up To 15 Mm Segment Height E more→nables A Long Lifetime, Even In The Most Demanding Materials.- Laser-Welded Diamond Cutting Segments.Specif
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blad more→e excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate.Blade Diameter: 125mmBore Size: 22.2mmSegment Height: 10mm.Additional Information:&bu
 |
The X-LOCK Multi Construction Cutting Disc cuts virtually anything without having to change discs. Made from a special abrasive mix, it enables working on various materials. In addition, the thin disc more→offers easy and fast cutting with little exertion of force, produces less noise and minimum dust and prevents blue discolouration or burr formation. Use this disc for cutting metal, Inox, non-ferrous metals, stone, soft tiles, marble and plastic. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders. Straight Cut virtually everything without disc changes Cutting disc for metal, inox, non-ferrous metal, stone, soft …
 |
The Best for Universal Turbo Diamond Cutting Disc provides fast cuts in universal building materials. Its optimised diamond matrix provides the fastest cuts through a variety of materials. The disc's more→matrix shape has been developed for universal cuts with a near-perfect finish for all visible cutting edges. Additionally, this product cuts quickly while producing very little vibration. Use this disc for cutting building materials such as concrete and masonry. • Fast Cuts in Universal Building Materials • Best for Universal Turbo Diamond Cutting Disc provides fast cuts in universal building materials • Optimised diamond matrix provides the fastest cuts • Matrix shape developed …
Wire & Cup Brushes212
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Cup Brush 75mm 6mm Shank STA36040
Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits • Crimped steel wir more→es • Less aggressive than twist knot brushes • Suitable for various metal preparation tasks • Designed for use in a standard electric drill Specifications • Diameter: 75mm • Pack Quantity: 1
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £11.95 up to £13.71
Compare prices4→Compare prices and buy Sealey Wire Brush Set 5pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Wire Cup; ø50mm, 75mm, Flat Wire; ø50mm, 75mm, ø25mm Decarbonising/C
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Flat End Crimped Wire Brush 12mm 6mm Shank WBSI12
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £25.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 22mm 6mm Shank 454278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 22mm.Wire: 0.35 Steel.Additiona
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £8.49 up to £11.11
Compare prices6→Compare prices and buy Draper Twisted Wire Wheel, 75mm
Heavy duty wheel with integral 6mm shank. For descaling, deburring, removing rust, adhesive residues and preparing/cleaning welding seams. Display packed.
 |
Price from £4.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank STA36020
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
