Makita GA9081
Cutting Discs209
 |
Milwaukee Heavy Duty AX Carbide Demolition Reciprocating Saw Blades. Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applica more→tions. Cuts through harderned screws and fastners. Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials. Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws. Fang tip for faster plunge cutting and reaching into restricted areas. Nail guard protects the tooth during nail impacts for increased durability and …
 |
Fast Powerful Cutting - The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, wh more→ich copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Features:- For Reliable Cutting In General Construction Material- Optimized Diamond Matrix With A High Quality Standard For Solid ResultsSpecific
 |
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades with premium graded quality diamond segments and a tensioned high grad more→e steel core were manufactured to EN 13236 quality standards. Suitable for cutting; concrete concrete lintels reinforced concrete lintels hard sandstone concrete pipes concrete paving slabs bricks block paving slabs concrete kerbs clay pipes hard slate roofing tiles quarry tiles etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 230mm.PTDCORDBT
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 230mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
 |
Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in more→stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º the most efficient results are achieved. For use with a variety of machines mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Thin cutting disc designed for use on stainless steel. Specifications • Diameter: 230 mm • Bore: 22.2 mm • Centre: Flat • Type: WA36R-BF • Thickness: 1.2 mm • Pack Quantity: 1
 |
Reliable Performance - The Standard for Inox Cutting Disc is a reliable choice for working on Inox. The disc is made of aluminium oxide specifically designed for use with Inox. It is free of ferrous, more→sulphurous and chlorinated fillers. Use this disc for cutting Inox. It is compatible with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Performance in Inox • The Standard for Inox Cutting Disc offers a reliable choice when working with Inox • An aluminium oxide disc specifically designed for use on Inox Specifications Specification: …
Wire & Cup Brushes309
 |
Price from £23.18 up to £25.95
Compare prices5→Compare prices and buy Lessmann 472.21X X-Lock Steel Knot Wheel Brush 115Mm Non Spark LES47221X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting they can be used for polishing light deburring work and removing rust paint dir more→t and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses car workshops and by staircase railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Steel Knot Wheel Brush 115mm Non SparkPTDLES4722
 |
Price from £5.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 75mm 6mm Shank 2608622007
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
 |
Price from £6.26 up to £7.49
Compare prices6→Compare prices and buy Sealey TKCB65 Twist Knot Wire Cup Brush Ø65Mm M10 X 1.5Mm
Suitable for use with power tools up to the maximum rated rpm. Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Ø65mm Twist Knot Wire Cup Brush M10 x 1.5mm• more→Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.• Model No. TKCB65Model No: TKCB65:Brand: Sealey:Diameter
 |
Price from £5.71 up to £8.49
Compare prices6→Compare prices and buy Draper 41444 Brassed Steel Crimped Wire Cup Brush 75Mm M14 each 1
This wire cup brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Compatible with most angle grinders with an M14x2 connection.PTDD
 |
Price from £29.15 up to £31.95
Compare prices5→Compare prices and buy Lessmann 456.278 Knot End Brush With Shank 29Mm 0.35 Steel Wire LES456278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.PTDLES456
 |
Price from £8.17 up to £9.95
Compare prices6→Compare prices and buy Lessmann DIY Cup Brush with Shank 50mm, 0.25 Brass Wire LES43012607
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: more→0.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £13.95
Compare prices5→Compare prices and buy Stanley Twist Knot Wire Cup Brush 70mm M14 Thread STA36080
Fitted with an M14 thread for connection to angle grinders, this twist knot steel wire cup brush is ideal for aggressive paint and rust removal or general suface preparation work on metal and stone su more→rfaces. Stanley cup brushes have an internal holding plate for improved consistency and safety. Features and Benefits • Standard M14 thread • Suitable for corded or cordless angle grinders • Heavy duty carbon steel bristles • Excellent for rust and paint removal Specifications • Stanley Part No: STA36080 • Connection: M14 • Diameter: 70mm • Max Rotation Speed: 12,000 RPM
 |
Price from £16.62 up to £20.95
Compare prices6→Compare prices and buy Draper Expert 52631 Twist Knot Wire Cup Brush 60Mm M14 each
Expert Quality industrial quality manufactured from 0.8mm hardened steel wire. Designed for use with angle grinders.PTDDRPDIR52631
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
