Makita HR5202C

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-a more→lloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit, useful for reaching awkward spots or for drilling accurate, deep holes into wood. It has a positive cutting angle which drills h more→oles twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-20-400 Long Flat Bit 20mmAdditional Information:• Diameter: 20mm• Overall Length: 400mm• Pack Qty.: 1

The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional more→masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.

The Faithfull Imperial HSS Drill Bit Sets are designed for cutting metal, however they are also suitable for drilling holes in timber, chipboard and plywood. The sets have an easy flip open action cas more→e with transparent front for easy checking of contents. Manufactured to meet DIN 338 standard. 7 Piece F7PSET: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32 and 1/4in. 13 Piece F13PSET: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64 and 1/4in.This set contains commonly used sizes from the imperial range. Although designed for cutting metal, HSS drills are also suitable for drilling holes in timber, chipboard and plywood. The robust plastic case secures and protects the drills when …

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its more→increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

The IRWIN Marples M373 Splitproof Bevel Edge Wood Chisels are ideal for heavy-duty use and have splitproof handles. They are made from best in category steel for improved sharpness and edge retention. more→The blade, bolster and tang are forged from one piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles that will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 16mm (5/8in).Additional Information:• Blade Width: 16mm

Sds Max Spade Chisel Offers Standard Chiselling For Various Demolition Applications In Concrete And Brick.Features: - Wide Cutting Edge Offers A High Rate Of Material Removal In Masonry And Mortar- Fi more→ts All Sds Max Rotary Hammer Drills.Specifications: - Concrete- Concrete Building Block- Lime And Sand Bricks- Solid Brick- Brick- Total Length Mm: 300- Chisel Cutting Edge Mm: 80- Shank, Shape: Sds Max

It is compatible with an SDS plus chisel attachment or it can be used directly in SDS plus hammers with a rotation stop. The SDS plus Wood Chisel delivers fast chiselling in soft wood. It has been des more→igned with angles for a perfect groove and quick results. The chisel is intended for use on general carpentry work in wood.Wood chiselSDS plus wood chisel delivers fast chiselling in soft wood• Fast Chiselling in Soft Wood• SDS plus Wood Chisel delivers fast chiselling in soft wood• Designed with angles for a perfect groove and quick resultsSpecifications:Total length mm: 175Chisel cutting edge mm: 20Materials:WoodMaterials in Detail:Hard/solid woodSoftwood

The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a prec more→ision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 14mm.Additional Information:• Blade Width: 14mm

The Sds Max Pointed Chisel Delivers Standard Chiselling For Various Demolition Applications. Its Pointed Tip Makes Precise Adjustment Work In Concrete Possible. The Chisel Is Intended For Use In Concr more→ete And Brick, Including Mortising, Demolition And Adjustment Work, In Addition To Restoring Joints And Clearing Reinforcements. It Is Compatible With Sds Max Shank Systems.Specifications: - Length: 600 Mm

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO™ process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufact more→ured from hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety.Size: 14mm.Additional Information:• Blade Width: 14mm

It is compatible with SDS max shank systems. The SDS max Spade Chisel offers standard chiselling for various demolition applications in concrete and brick. Featuring a wide cutting edge, it offers a h more→igh rate of material removal in masonry and mortar. The chisel is intended for removing roughcasting and layers of dirt as well as concrete residue from foamwork boards. Moreover, it can be used when restoring steel. Spade chisel SDS max spade chisel offers standard chiselling for various demolition applications in concrete and brick • Chiselling in Concrete and Brick for Various Demolition Applications • SDS max Spade Chisel offers standard chiselling for various demolition applications …