Makita RP0910
Diamond Core Bits & Milling Cutters567
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 16 • Overall Length Metric: 58
 |
Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge ro more→uters. Cutters above and including 9.5mm have TCT plunge Centre tip
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 18 • Dia Imperial: 45/64 • Cut Length Metric: 25 • Cut Length Imperial: 63/64 • Overall Length Metric: 67
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. S more→pecifications • Shank Diameter: 8 mm • Dia Metric: 5 • Dia Imperial: 13/64 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 66
 |
The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to follow more intricate curves. 25.4mm cutting depth more→for replication of thin components with templates. Fitted with a bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. PTFE coating to minimise heat and resin build-up for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for handheld or table work.PTDTREC168
 |
Having two tungsten carbide cutting edges, these cutters are suitable for professional use. This cutter is ideal for fast cutting applications on MDF, softwoods, hardwoods and plywood. Shank: 1/4in. F more→eatures: For grooving, rebating and mortising TCT TCT Specifications: Dimensions: H:15.0 x W:1.9 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB214
 |
1/2 Biscuit No. 20 TCT Router BitPTDDRPDIR75362"
 |
Smooth Countersinking - The HSS Countersink Bit, Hex-Shank performs smooth countersinking for screws and deburring of holes in tough materials. The ground countersink made of HSS (high-speed steel) ha more→s an optimised surface quality for even work. Excellent results in tough materials are made possible by three 90-degree cutting edges that continuously work, chattering- and burr-free. A high power-transfer, due to the hex shank, allows for flush hole countersinking. It is suitable for use on non-ferrous metals, steel and cast iron and has a hexagonal shank system for universal use. It can also be used with impact drivers. The HSS Countersink Bit, Hex-Shank is manufactured to DIN 335. The best results …
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
