Makita RP1800FX
Diamond Core Bits & Milling Cutters1084
 |
Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length M more→etric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 68 • Bearing Dia Metric: 12.7 • Angle: 90
 |
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications • Shank Diameter: 1/4 • Dia Metric: 31.9 • Dia2 Metric: 28.6 • C more→ut Length Metric: 22.5 • Overall Length Metric: 72.5 • Bearing Dia Metric: 16 • Radius 1 Metric: 7
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/2 more→• Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 51 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Short shank for Makita 3600B & 3 more→612BR, Ryobi and Hitachi routers. Specifications • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 63 • Overall Length Metric: 100
 |
They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used more→for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 15.9 • Dia Imperial: 5/8 • Dia2 Metric: 4.76 • Overall Length Metric: 85
 |
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softw more→ood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Includes 3 extra bearings. Tool creates rebates 7.9mm, 9.5mm, 11.1mm & 12.7mm. Specifications • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 62.5 • Bearing Dia Metric: 12.7 • Rebate Metric: 11
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 7.9 • Overall Length Metric: 47 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 1.6 • Radius 1 Imperial: 1/16
 |
Features:- Cylindrical shank compatible with three-jaw drill chucks.Specifications:- Diameter mm: 20.0- Step height- M: 10- Total length mm: 45- Shank diameter inch: 1/4- Shank diameter mm: 8
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
