Aerocool Value VP-650
 | Outdated Product $65.38 up to $69.56 This power supply is primarily designed to complete a quiet home computer system. Boasts 80 Plus Bronze certification, mounts in an ATX form factor chassis. There is support for powerful next-generation processors of the Haswell and Skylake class. The total PSU power of 650 W is enough to complete a performant gaming computer, adjusted for overclocking or a further upgrade. Aerocool Value VP-650 MTBF is 120,000 hours. Noise in peak load mode does not exceed 43 dB. The peak temperature reaches 61 °C. The power supply uses time-tested circuitry. There is a PFC filtration system. The voltage is stabilized according to the group principle. SATA connectors — 6 pcs, Molex (IDE) — 5 pcs. There is Floppy. Support only 1 graphics card PCI-E 8 pin (6+2). The active type cooling system is a 120 mm fa...n, the board is blown at a speed of 1800 rpm, and during idle, the blowing speed is reduced to 900 rpm. The internal current-carrying wiring is of a stationary type, that is, it does not come unfastened. There is additional protection against short circuit, as well as overvoltage and overcurrent. The board has plates for heat dissipation. The efficiency is at around 80-85%. |
 |
This power supply is primarily designed to complete a quiet home computer system. Boasts 80 Plus Bronze certification, mounts in an ATX form factor chassis. There is support for powerful next-generation processors of the Haswell and Skylake class. The total PSU power of 650 W is enough to complete a performant gaming computer, adjusted for overclocking or a further upgrade. Aerocool Value VP-650 MTBF is 120,000 hours.
Noise in peak load mode does not exceed 43 dB. The peak temperature reaches 61 °C. The power supply uses time-tested circuitry. There is a PFC filtration system. The voltage is stabilized according to the group principle. SATA connectors — 6 pcs, Molex (IDE) — 5 pcs. There is Floppy. Support only 1 graphics card PCI-E 8 pin (6+2). The active type cooling system is a 120 mm fan, the board is blown at a speed of 1800 rpm, and during idle, the blowing speed is reduced to 900 rpm. The internal current-carrying wiring is of a stationary type, that is, it does not come unfastened. There is additional protection against short circuit, as well as overvoltage and overcurrent. The board has plates for heat dissipation. The efficiency is at around 80-85%.
Before buying always check characteristics and configuration of product with online store manager
Catalog Aerocool 2024 - new products, best sales and most actual models Aerocool.
