ARCTIC Freezer i13 X (ACFRE00078A)

Compact CPU tower cooler from Arctic for Intel sockets. The 92 mm fan is PWM-controlled and works at a maxim i13X offers a lot of cooling capacity for a particularly attractive price.The features of the Arctic Freezer i13X at a glance:- Compact tower cooler from Arctic- 92mm PWM fan with hydrodynamic bearing- Speed range from 300 to 2000 rpm with o... morenly 0.3 sone volume- Three copper heat pipes with direct touch technology- 44 cooling fins for an improved dispersion of waste heat- High compatibility with RAM bars- Arctic MX-2 thermal compound pre-appliedMore fan power, lower volumeThe hydrodynamic bearing of the 92 mm P-Fan reduces the generation of heat and noise and at the same time increases the service life of the fan. Thanks to the PWM connection, the fan speed of the mainboard can be reduced, which means that the noise level is usually very low, at a maximum of 0.3 sone .The waste heat from the CPU is absorbed directly by the three copper heat pipes with direct-touch technology and passed on to the aluminum heat sink. The cooler is equipped with 44 cooling fins, through which heat can be optimally removed. Due to its small footprint and compact size, a collision with RAM bars is almost impossible.Technical details:- Dimensions: 109 x 137 x 86 mm (W x H x D)- Material: copper (heat pipes), aluminum (floor, fins)- Weight: approx. 443 g- Heat pipes: 3x Ø 6 mm- TDP: 150 W- Fan: 92 mm- Bearing: Fluid Dynamic Bearing- Volume: max. 0.3 sone- Revolutions: 300 - 2000 rpm- Current: 0.09 A- Voltage: 12 V- Connection: 4-pin PWM- Compatibility: Intel 1150, 1151, 1155, 1156, 1200, 2011, 2011-3, 2066- Guarantee: 6 yearsPRODUCT SPECIFICATION:CPU Socket1150, 1151, 1155, 2011-V3, 2066, 1156, 1200CPU Cooler typeSingle TowerFan connector4Pin (PWM control)

Compact Intel CPU Cooler* Small Footprint For Optimal Compatibillity * Pre-Applied MX-2 Thermal Paste * Longer Lifespan Thanks to its Low Motor Temperature * Offset Heat Pipes Enable Optimal Heat Dissipation * P-Fan For Increased Performance * Fluid Dynamic Bearing * Direct Touch Heat Pipes* More Cooling Capacity With Freezer I13 * More Efficient A... morend Whisper Quiet * Multilingual Manuals Small Footprint For Optimal Compatibillity The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility. Pre-Applied MX-2 Thermal Paste Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly. Longer Lifespan Thanks to its Low Motor Temperature The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X. Offset Heat Pipes Enable Optimal Heat Dissipation The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air. P-Fan For Increased Performance Inspired by the P-series, the Freezer i13 X's fan benefits from all of the advantages of P-fans: - High static pressure for increased cooling performance - Broad RPM range - Lower power consumption - Less vibration - PWM for synchronous fan control Fluid Dynamic Bearing Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended. Direct Touch Heat PipesThe Freezer i13 X uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes. More Cooling Capacity With Freezer I13 XThe ARCTIC Freezer i13 X sets new standards in cooling.Proven to outperform its predecessor in cooling capacity. More Efficient And Whisper Quiet In addition to operating more quietly, even at maximum speed, the Freezer i13 X's built-in fan motor is also much more efficient.The power consumption was reduced from 0.18 A to 0.07 A, which corresponds to an effective saving of 60 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer i13 X to run at a whisper-quiet 0.3 sone when at maximum speed. Multilingual Manuals ARCTIC installation manuals come in a variety of languages. They are regularly