Deepcool CL500 black (R-CL500-BKNMA1N-G-1)
 | Outdated Product £131.52 The case will be appreciated by those users who expect the chassis to be able to comfortably assemble components. This is a mid-sized ATX Case platform with a well-thought-out design. The side panels are attached using a simple and reliable magnetic holder. Easy to detach and insert on the top cap. If desired, the top cover can be removed completely. The same applies to the front panel, which has a large ventilation duct in the form of a grill. The Deepcool CL500 computer case demonstrates the excellent potential of the cooling system. The package includes one regular 120 mm fan and a controller for four turntables, which makes it possible to adjust the speed of rotation of the impellers. In total, the chassis is ready to accommodate six 120 mm coolers. For the motherboard, an ATX, MicroAT...X, Mini-ITX size area is allocated. A 165mm CPU tower will fit inside the platform. Regarding the graphics card, you can use a solution up to 330 mm long. When installing a massive and heavy graphics card, you should install a special support that will not allow the adapter to deform and prevent the connection connector from breaking. The interface panel is very interesting, you can find two USB 3.0 ports and another USB Type C port, as well as several 3.5 mm jacks. |
 |
The case will be appreciated by those users who expect the chassis to be able to comfortably assemble components. This is a mid-sized ATX Case platform with a well-thought-out design. The side panels are attached using a simple and reliable magnetic holder. Easy to detach and insert on the top cap. If desired, the top cover can be removed completely. The same applies to the front panel, which has a large ventilation duct in the form of a grill.
The Deepcool CL500 computer case demonstrates the excellent potential of the cooling system. The package includes one regular 120 mm fan and a controller for four turntables, which makes it possible to adjust the speed of rotation of the impellers. In total, the chassis is ready to accommodate six 120 mm coolers. For the motherboard, an ATX, MicroATX, Mini-ITX size area is allocated.
A 165mm CPU tower will fit inside the platform. Regarding the graphics card, you can use a solution up to 330 mm long. When installing a massive and heavy graphics card, you should install a special support that will not allow the adapter to deform and prevent the connection connector from breaking. The interface panel is very interesting, you can find two USB 3.0 ports and another USB Type C port, as well as several 3.5 mm jacks.
Conservatives approve
Deepcool CL500 is an old-school strict, even a little rough-looking, primarily due to the lattice design, PC case. But inside it is made according to all the latest technological trends. For example, the side panels, both glass and the opposite all-metal, have a screwless mount — on magnets.
Caring for your graphics card
The manufacturer claimed the permissible length of the graphics card to be 33 cm, but if the fans are installed not inside the case, but between the frame and the front convex panel, then you can win another couple of centimeters. An adjustable metal stand is provided to support long and heavy graphics cards.
Newfangled connector
On the top panel, in addition to two full-size USB Type-A ports, there was also a compact double-sided Type-C. There are three control buttons: Power, Reset and unlocking the top cover for dismantling the grate with a dust filter. It is more reasonable to mount the LSS radiator from above: there is a sufficient margin for it in height and air bubbles will not collect.
Slides for discs
Behind the motherboard tray is a pair of easy-to-remove sleds for 2.5-inch SSDs, as well as a hub for four fans. The set comes with only one non-luminous turntable. However, a modification of the CL500 4F case with four ARGB propellers has recently gone on sale.
