Model year
The year to which the manufacturer classifies the bicycle (more precisely, the model range that includes this model).
The significance of this parameter is that the model range is updated every year, and two bicycles with the same name, but from different years, can differ significantly in characteristics and equipment. At the same time, new models (
2024,
2023) usually cost more, and older ones (
2022,
2021, etc.) are sold at reduced prices.
It is worth considering that a later year of manufacture in itself does not necessarily mean more advanced characteristics - manufacturers can change them in the direction of simplification. So
the model of previous years may be in no way inferior to the new bike.
Frame size
Frame size refers to the distance from the saddle attachment point to the bottom bracket attachment point (axles with gears and pedals). The main parameters that determine the choice of a bike for frame size are the height of the user, the purpose of the bike and the intended riding style.It is also worth considering the
female frame, which is lowered, which allows you to ride comfortably even in a skirt or dress.
User height is the most significant factor. In general, the taller the user, the larger the frame should be. The universal formula that allows you to calculate a specific size is as follows: the length of the leg from the groin to the heel in centimeters must be multiplied by 0.6, and then divided by 2.5 — you get the approximate size of the frame in inches. But in the characteristics of brands, the frame can also be indicated in the usual form for measuring size
XXS,
XS,
S,
M,
L,
XL and
XXL.
However, note that this value is very arbitrary and approximate, it can only be used for simple bicycles not intended for extreme driving (for example, city bikes, see "Destination"). If you choose a more specialized model (mountain, road, BMX) — it is better to refer to the tables for th
...e appropriate type, because. sizes for one height can vary significantly depending on the destination. In addition, different manufacturers have different frame geometry and measurement methods, and therefore, for the most accurate selection, it is recommended to use the manufacturers' own tables.
Note that the optimal frame size is not absolute — in most cases, for the same height, “neighboring” sizes are quite suitable. And here it is worth paying attention to the intended driving style. It is believed that small, well-controlled frames are better suited for extreme variant, and larger and more stable ones are better suited for long-term calm movement.Tyre
Tyre model supplied with the bike as standard. Different tyres have different purposes and characteristics; knowing the tyre model, you can clarify these points and check how they correspond to your wishes. This is especially important when choosing a machine for serious cycling.
Spokes
Model of spokes used in complete bicycle wheels.
This information is unlikely to be needed for simple everyday use. Therefore, the spoke model is indicated mainly in the most advanced bicycles designed for professional use, where the smallest details of equipment can be significant.
Front hub model
The model of the hub used in the front wheel of a bicycle.
The hub is the central part in the wheel through which the axis of rotation passes. Features of the behavior of a bicycle depend on its characteristics, in particular, “rolling” (the ability to move by inertia, without pedaling). Knowing the model of the front hub, you can clarify its characteristics according to the manufacturer's documentation, find reviews from other users, etc., in order to determine how this model suits you.
Rear hub model
Model of the hub used in the rear wheel of a bicycle. See Front Hub Model for details.
Bottom bracket model
Model of the carriage installed on the bike as standard. The bottom bracket is the part that connects the system (front sprockets with pedals) and the frame; roughly speaking — an axle with bearings.
For details on the meaning of the model of a particular part, see "Cassette Model".
Chain model
Model of the chain supplied as standard with the bike. For details on the value of the Model parameter for any part, see Cassette Model
Stem
Features of the handlebar stem (see "
Stem Adjustment ") installed on the bike. Here, both the offset model and its individual characteristics, most often the length and diameter, can be indicated. The stem itself can be either a separate part or an integral part of the steering wheel itself (the so-called integrated stem); the latter option is convenient in that the steering wheel cannot be skewed (unless broken), respectively, there is no need for centering.
As for the parameters, the rider’s landing depends on the length — the longer the takeaway, the more you will have to lean forward (ceteris paribus); strength and resistance to loads are directly related to the diameter; See “Cassette Model” for details on why the model name may be needed. It is worth noting that these parameters are important primarily for keen enthusiasts who pay attention to the smallest details in the characteristics of the machine; for most users, even advanced ones, such trifles are unlikely to be useful.
