Dark mode
United Kingdom
Catalog   /   Computing   /   Components   /   Graphics Cards

Comparison Palit GeForce RTX 4070 Ti JetStream vs PNY GeForce RTX 4070 Ti 12GB Verto LED Triple Fan

Add to comparison
Palit GeForce RTX 4070 Ti JetStream
PNY GeForce RTX 4070 Ti 12GB Verto LED Triple Fan
Palit GeForce RTX 4070 Ti JetStreamPNY GeForce RTX 4070 Ti 12GB Verto LED Triple Fan
from £695.16 
Expecting restock
Compare prices 3
TOP sellers
InterfacePCI-E v4.0PCI-E v4.0
GPU
GPU modelNVIDIA GeForce RTX 4070 TiNVIDIA GeForce RTX 4070 Ti
ArchitectureAda LovelaceAda Lovelace
Memory size12 GB12 GB
Memory typeGDDR6XGDDR6X
Memory bus192 bit192 bit
GPU clock speed2610 MHz2610 MHz
Memory clock21000 MHz21000 MHz
Lithography5 nm5 nm
Max. resolution7680x4320 px7680x4320 px
Passmark G3D Mark31526 score(s)31526 score(s)
Connections
HDMI11
HDMI versionv.2.1v.2.1
DisplayPort33
DisplayPort versionv.1.4av.1.4
Software
DirectX12 Ultimate12 Ultimate
OpenGL4.64.6
VR
Stream processors76807680
General
Monitors connection44
Coolingactive (fan)active (fan)
Fans33
Power consumption285 W285 W
Additional power16 pin16 pin
Minimum PSU recommendation750 W750 W
Number of slots3.23
Length329 mm305 mm
Added to E-Catalogjune 2023march 2023

DisplayPort version

The version of the DisplayPort and/or miniDisplayPort interface used by the graphics card. For the interfaces themselves, see the relevant help items; here we recall that they differ only in the type of plug. So the list of versions for both cases is the same, it looks like this:

— v 1.2. The earliest widely used version (2010). However, already in this version, 3D compatibility and the daisy chain mode appeared. The maximum fully supported resolution when connecting a single monitor is 5K (30 fps), transmission up to 8K is possible with certain restrictions; a frame rate of 60 Hz is supported up to a resolution of 3840x2160, and 120 Hz — up to 2560x1600. And when using daisy chain, you can connect up to 2 2560x1600 screens at 60 frames per second or up to 4 1920x1200 screens at the same time. In addition to the original version 1.2, there is an improved v 1.2a, the main innovation of which was support for AMD FreeSync, a technology used in AMD video cards to synchronize the refresh rate of the monitor with the actual frame rate output by the video adapter.

— v 1.3. An update introduced in 2014. The increased bandwidth made it possible to provide full, without restrictions, support for 8K at 30 fps, as well as transmit 4K images at 120 fps, sufficient for 3D work. Resolutions in daisy chain mode have also increased — up to 4K (3840x2160) at 60 fps for two screens and 2560x1600 at the same frame rate for four. Of the specific innovations, it is worth me...ntioning the Dual Mode mode, which allows you to connect HDMI and DVI devices to such a connector through the simplest passive adapters.

— v 1.4.Version introduced in March 2016. Formally, the bandwidth has not increased compared to the previous version, but thanks to signal optimization, it became possible to work with 4K and 5K resolutions at 240 fps and with 8K at 120 fps. However for this, the connected screen must support DSC encoding technology — otherwise, the available resolutions will not differ from version 1.3. In addition, v 1.4 added support for a number of special features, including HDR10, and the maximum number of simultaneously transmitted audio channels increased to 32.

—v 1.4a. An update released in 2018 "quietly" — without even an official press release. The main innovation was the update of Display Stream Compression technology from version 1.2 to version 1.2a.

Number of slots

The number of slots occupied by the graphics card on the back of the system unit.

This indicator allows you to estimate the amount of space required to install a video adapter. It is relevant in the light of the fact that modern video cards can have a fairly extensive set of connectors, and for this set there has long been little standard lanyard for 1 slot. This is especially true for powerful performant models. Thus, many solutions, especially mid-range and top-end ones, occupy two or even three slots at once.

Separately, it is worth touching on models for which the characteristics indicate a fractional number of slots — usually 2.5 or 2.7. This detail is provided by the manufacturer for promotional purposes — as confirmation that the graphics card is smaller than a full-fledged 3-slot solution. However, in fact there is no difference between these options: adapters for 2.5 or 2.7 slots still block the third slot (albeit partially), making it unusable.

Length

The total length of the graphics card.

In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.

Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of 150 – 200 mm or less ; an indicator of 200 – 250 mm can still be considered relatively small, 250 – 290 mm — medium, and many models (mostly advanced) have a length of more than 290 mm.
Palit GeForce RTX 4070 Ti JetStream often compared