Comparison Creative Sound Blaster AE-7 vs Creative Sound BlasterX G6

The type determines how the sound card is installed and connected.

— Internal. Such models are designed to work as a permanent component of the system. They are installed in the computer's system unit, in a slot on the motherboard (PCI or PCIe, see "Connection interface") in such a way that usually only a panel with inputs and outputs is located outside. One of the main advantages of internal cards is compactness — they do not take up space outside and practically do not affect the dimensions of the system unit. At the same time, in terms of functionality, such models can vary from the simplest low-cost options to advanced professional solutions. On the other hand, in connection, internal cards are less versatile and more complex than external cards: this requires at least disassembling the PC case, and installation options are limited both by the characteristics of the motherboard and by the availability of space inside the case. It is also believed that cards of this type are more susceptible to electromagnetic interference, as they are in close proximity to the electronic components of the computer.

— External. As the name implies, models of this type are located outside the PC case during operation and use the appropriate connection interfaces — USB or FireWire (see below). Of the advantages of external cards, first of all, it is worth noting the convenience of connection: after al...l, connecting a plug to an external socket is much easier and faster than fiddling with the hardware of the case. Due to this, one card can be easily used on several computers, reconnecting if necessary. In addition, they are indispensable for laptops and some desktop computers, where the installation of internal audio cards is not structurally provided. Another advantage is the remoteness from the hardware of the computer, which reduces the level of interference. The main disadvantage of this type of cards is the need for additional space for them near the computer; while more advanced models, usually, take up more space. In addition, for devices with additional power (see below), you will need a separate outlet.

The main interface used to connect a sound card to a computer or other device.

Like the sound cards themselves, the interfaces used in them are divided into internal ( PCI, PCI-E USB, USB C, FireWire, Thunderbolt, 3.5 mm mini-jack, Bluetooth). Here is a more detailed description of each of these options:

— PCI-E. The main modern interface for connecting internal peripherals (including sound cards) to computer motherboards. Used in most internal type models (see above). The main advantage of solutions with PCI-E is that connectors for their connection can be found on almost any modern motherboard. True, these connectors may be needed for other components - a video card, a TV tuner, or even an SSD drive; however, even on the simplest motherboards, there are usually several PCI-E slots, so this point cannot be called a serious drawback.

— PCI. Interface for connecting expansion boards to the PC motherboard. It is the forerunner of PCI-E, has significantly lower bandwidth and more limited features, so is generally obsolete. Nevertheless, in our time, motherboards with such connectors and sound cards for the PCI interface (including quite advanced ones) continue to be produced. This is due to the fact that a relatively low bandwidth...is sufficient to work with sound; and installing an audio card in the PCI slot leaves PCI-E slots free, which may be required for components that are more demanding on connection speed. In any case, before buying such a sound card, it does not hurt to make sure that the "motherboard" has a connector for connecting it.

— USB. Connection via standard USB port. Until recently, this was the most popular interface for external peripherals, found in almost all PCs and laptops. It was under USB that most external sound cards were made. The disadvantage of this connection method is that USB connectors may be required for other devices, which creates problems with a small number of ports and an abundance of peripherals. On the other hand, such situations do not occur so often, and to solve them, it is enough to have a USB splitter (hub) on hand.

Separately, we note that the full-sized USB sockets in modern PCs and laptops have been replaced by more compact USB C (see below).

- USB C. Peripheral connector with a symmetrical contact group, which is often replaced by full-size USB ports on board modern PCs and laptops. Many new models of external sound cards are made for this interface. The exception to the rule are only individual instances for Thunderbolt (see below) - for them, it is Thunderbolt, and not USB C, that is indicated as a peripheral connection connector.

— Thunderbolt. A universal peripheral connector used primarily in Apple computers and laptops. It should be borne in mind that different generations of Thunderbolt differ in the type of physical connector: versions v1 and v2 use a miniDisplayPort socket, version v3 uses a USB C socket. So, when choosing a sound card with such a connection, you must definitely clarify this point. On the other hand, versions of Thunderbolt with different connectors are quite mutually compatible through the appropriate adapters.

— FireWire. It is also IEEE 1394. An interface for external devices, which some time ago enjoyed a certain popularity, but today it is practically obsolete.

- 3.5 mm (mini-jack). Mini-jack is one of the most common audio connectors. However, it is usually provided as one of the audio inputs (see below) and is rarely used as the main interface for connecting a sound card to an external device. Such a connection is found mainly in specialized gaming models, including those designed for use with consoles. At the same time, in such models, the mini-jack connector can be made combined, with the ability to connect both a linear (analog) signal via a conventional electrical wire, and an optical (digital) signal via a TOSLINK cable. Recall that the optical interface is notable for its complete insensitivity to external interference, it allows you to transmit multi-channel sound, however, cables for such a connection require care in handling.

— Bluetooth. Wireless connection according to the Bluetooth standard. It is found mainly in models designed for use with smartphones and tablets - there are few wired connectors in such gadgets, but Bluetooth modules are almost guaranteed. True, initially, with such a transmission, the sound is greatly compressed, which noticeably affects its quality; however, modern Bluetooth audio cards usually include support for aptX to remedy this shortcoming. Of course, the signal source must also support this technology - you should make sure of this before buying.

Brand of the audio chip installed in the sound card.

The audio chip is one of the most important parts of a sound card, a kind of "heart" of the whole circuit, and it is on its characteristics that the sound quality and other capabilities of a particular model largely depend. Knowing the brand of the chip, you can easily find various information on it — official specifications, test results, reviews, etc. — and based on this, draw a conclusion to what extent this sound card is able to meet your requirements. Of course, for ordinary video cards (see "View") there is no need to delve into such details, but when choosing a gaming or audiophile model, they can be very useful.

Sound card compatible with ASIO standard.

ASIO (an abbreviation for Audio Stream Input/Output, i.e. “audio stream input-output”) is a technology designed for professional work with sound in the Windows environment; in particular, it reduces latency and improves the accuracy of the audio stream. If you do not plan to seriously engage in recording, mixing tracks, etc., most likely you will not need this function, but for musicians, sound engineers and other similar professionals, it can be very useful. The ASIO standard provides both software and hardware requirements; therefore, to fully use it, you must have a compatible audio card.

The need to connect additional power to the sound card.

Most of both internal and external (see "Type") sound cards are powered directly through the connection connector (see "Connection interface"). At the same time, for normal operation of advanced models (for example, audiophile and gaming, as well as some DACs; see "View"), this power may not be enough, which requires an additional power source. In internal audio cards, it is carried out from the computer power supply, in external ones — directly from the 230 V network.

The dynamic range of a DAC is the ratio between the loudest sound that the converter can produce and the quietest. The wider the dynamic range — the richer the sound will be, the lower the likelihood that quiet sounds that complement the overall picture will be muffled during conversion. At the same time, it is worth noting that almost all modern sound cards provide a dynamic range that is quite sufficient for comfortable everyday use, and in many models this parameter may not be indicated at all. It is worth paying attention to it when choosing an advanced specialized audio card — for example, a gaming one (see "View"). The minimum for professional models is 90 dB, but in fact, among similar solutions, this figure is usually 120 dB or more.

The dynamic range of an ADC is the ratio between the loudest and quietest sound that the converter is able to perceive and process. The larger this parameter, the more complete the picture of the sound converted to digital format will be, the less quiet details (which, nevertheless, affect the overall sound) will remain when digitizing “behind the scenes”. At the same time, we note that this parameter is critical only for professional recording, and therefore it is indicated in the characteristics quite rarely, usually only in models of the corresponding specialization (in particular, audio interfaces, see "View").

The number of inputs in the design of the sound card using 3.5 mm mini-Jack connectors. This connector, usually used to transmit an analogue signal, is one of the most popular in modern audio technology. Speaking of inputs, it's worth noting that most computer microphones are designed to plug into the 3.5mm jack; this also applies to separate microphone plugs on headsets. At the same time, the specific purpose of the mini-jack sockets in different sound cards may be different; Moreover, in some models, the same socket can be reconfigured and even change its purpose (from input to output and vice versa). These points, usually, are specified in the characteristics.

Using a simple adapter, you can also connect a 6.35 mm plug (Jack) to the 3.5 mm jack.

The number of inputs in the design of the sound card using 6.35 mm Jack connectors. This connector is in many ways similar to the 3.5 mm mini-Jack described above (and is compatible with it through a simple adapter), however, due to its larger size, it is poorly suited for portable electronics. On the other hand, in the 6.35 mm standard it is easier to implement a three-channel connection scheme and ensure the transmission of a balanced signal (for more details, see "XLR"), which is often required in professional audio work. Therefore, connectors of this type are quite popular in advanced stationary technology, where connection reliability and signal quality are more important than compactness. The Jack input can be used for various purposes, which is usually indicated in the specifications; however, its very presence, usually, speaks of a rather high class sound card.

Note that on balanced XLR models (see below), a 6.35mm input can be built right into the XLR jack; in such cases, these interfaces cannot be used simultaneously.