United Kingdom
Catalog   /   Small Appliances   /   Home Appliances   /   Water Filters

Comparison Atlas Filtri Hydra M OT 3/4 RLH 90 vs Atlas Filtri Hydra M OT 3/4 RSH 50

Add to comparison
Atlas Filtri Hydra M OT 3/4 RLH 90
Atlas Filtri Hydra M OT 3/4 RSH 50
Atlas Filtri Hydra M OT 3/4 RLH 90Atlas Filtri Hydra M OT 3/4 RSH 50
Expecting restockExpecting restock
TOP sellers
Typemain (mesh)main (mesh)
Connectionto the water supplyto the water supply
Purpose
for cold water
for cold water
Specs
Number of flasks11
Stages of purification11
Pollution clipping90 µm50 µm
Filtration speed166 L/min
Max. operating pressure8 atm8 atm
Max operating temperature45 °C45 °C
Filtration
Types of filtration
mechanical impurities
mechanical impurities
More features
Replacement cartridgesRAH 90RSH 50
Fitting size¾"¾"
Pressure gauge
Added to E-Catalogjune 2023june 2023

Pollution clipping

The smallest size of foreign particles (in microns) that the filter can hold in total. Accordingly, the smaller this size, the higher the filtration efficiency, the less undissolved impurities remain in the filtered water. On the other hand, finer cleaning usually takes more time, which affects the speed (throughput) of the filter. It should be noted that in the case of using reverse osmosis filters, the filtration is very fine, up to 0.01 microns.

Filtration speed

The amount of water that the filter is able to pass through itself per unit of time (of course, effectively purified in the process); usually stated in liters per minute. This parameter is largely related to the type (see above): for example, in jugs, the filtration rate usually does not exceed 0.5 L per minute, while for main devices that supply entire apartments, a throughput of tens or even hundreds of liters is required.

Note that it does not always make sense to pursue a high filtration rate. After all, other things being equal, finer cleaning takes more time; accordingly, the faster the filter works, the higher the chance that the quality of such cleaning will be relatively low. And devices that purify water efficiently and quickly usually have an appropriate price. Therefore, it is worth considering the purpose of the filter and, on the basis of this, determine the balance between the filtration speed and its quality when choosing. It is also worth keeping in mind the conditions of use: for example, if you need to filter low-quality tap water for drinking, it is better to sacrifice speed in favor of efficiency.

Replacement cartridges

Models of replaceable cartridges for which the filter is designed. Knowing the names of models, it will be much easier for you to find a replacement for an exhausted cartridge. In addition, the options directly named by the manufacturer are fully compatible with the filter and correspond to official specifications, while there is no such guarantee for "non-native" cartridges.

Several names in this paragraph are usually indicated for filters with multi-stage filtration (see "Stages of purification") — a cartridge for each stage.