United Kingdom
Catalog   /   Photo   /   Binoculars & Telescopes   /   Binoculars & Monoculars

Comparison Sigeta Spirit 10x25 WP vs BRESSER Nautic 8x25 WP

Add to comparison
Sigeta Spirit 10x25 WP
BRESSER Nautic 8x25 WP
Sigeta Spirit 10x25 WPBRESSER Nautic 8x25 WP
from $41.00
Outdated Product
Compare prices 1
TOP sellers
Product typemonocularmonocular
Magnification10 x8 x
Optical characteristics
Field of view 1 km away122 m122 m
Real angle of view5.2 °6.97 °
Min. focus distance1.2 m5 m
Twilight factor15.814.1
Relative brightness6.39.8
Diopter adjustment
Design
Lens diameter25 mm25 mm
Exit pupil diameter2.5 mm3.13 mm
Eye relief14 mm
Focuscentral
Anti reflective coatingfull multilayerfull multilayer
PrismRoofRoof
Prism materialBaK-4BaK-4
Nitrogen filled
General
Dustproof, water resistant
Case
Bodyrubberized plastic
Size108х45х40 mm110x55x38 mm
Weight130 g156 g
Color
Added to E-Catalogjuly 2016january 2015

Magnification

The magnification factor indicates how many times the image of any object in the eyepiece will be larger than what is visible to the naked eye. Standard values are 7x, 8x, 10x, 12x, 20x. The higher the magnification, the greater the degree of approximation and the further the distance from which one or another object can be seen through binoculars. On the other hand, increasing the magnification usually means decreasing the angle of view, and it can be very difficult to “catch” an object of interest (especially a moving one) through binoculars. In addition, with the same lens size, a model with a higher magnification will have a smaller exit pupil size and, accordingly, a lower aperture ratio (see below for more details). For models with multiplicity adjustment (see below), this item usually indicates the maximum value of this parameter. The magnification is the first number in traditional markings like 8x40 - this example corresponds to eight-fold optics. If there is a multiplicity adjustment (see below), the markings indicate the entire range - for example, 8-12x40.

Real angle of view

The section of the panorama that can be viewed through the eyepieces of binoculars. The higher the actual angular field of view, the wider the visibility of the optics. Note that the angular field of view has an inverse relationship with magnification. That is, the higher the magnification, the narrower the visibility (the smaller the real angular field of view). The actual angular field of view is calculated as follows: you need to divide the angular field of view (in degrees °) by the magnification factor. In comparison, the human eye has an angular field of view of 60 arcseconds (“). In terms of degrees, you get 150 °. Good binoculars provide a real field of view somewhere within 10 arcseconds. But it does not always make sense to chase after large indicators of the real angular field of view. The fact is that when viewing a large section of the panorama, the edges of the image receive noticeable distortion.

Min. focus distance

The smallest distance to the observed object, at which it will be clearly visible through binoculars / monoculars. All such optical instruments were initially created for observing remote objects, therefore, not all of them are able to work at short distances. When choosing a model for this parameter, one should proceed from the expected observation conditions: ideally, the minimum focus distance should not be greater than the smallest possible distance to the observed object.

Twilight factor

A complex indicator that describes the quality of binoculars / monoculars at dusk — when the illumination is weaker than during the day, but not yet as dim as in the deep evening or at night. It is primarily about the ability to see small details through the device. The need to use this parameter is due to the fact that twilight is a special condition. In daylight, the visibility of small details through binoculars is determined primarily by the magnification of the optics, and in night light, by the diameter of the lens (see below); at dusk, both of these indicators affect the quality. This feature takes into account the twilight factor. Its specific value is calculated as the square root of the product of the multiplicity and the diameter of the lens. For example, for 8x40 binoculars, the twilight factor will be the root of 8x40=320, that is, approximately 17.8. In models with power adjustment (see above), the minimum twilight factor is usually indicated at the lowest magnification, but data is often given for the maximum. The lowest value of this parameter for normal visibility at dusk is considered to be 17. At the same time, it is worth noting that the twilight factor does not take into account the actual light transmission of the system — and it strongly depends on the quality of lenses and prisms, the use of antireflection coatings, etc. Therefore, the actual image quality at dusk for two models with the same twilight factor may differ markedly.

Relative brightness

One of the parameters describing the quality of visibility through an optical device in low light conditions. Relative brightness is denoted as the diameter of the exit pupil (see below) squared; the higher this number, the more light the binoculars/monoculars let through. At the same time, this indicator does not take into account the quality of lenses, prisms and coatings used in the design. Therefore, comparing the two models in terms of relative brightness is only possible approximately, since even if the values are equal, the actual image quality may differ markedly.

Diopter adjustment

The presence in binoculars / monoculars of the function of diopter correction. This feature will be very useful if you wear glasses due to nearsightedness or farsightedness. By setting the required number of "plus" or "minus" diopters on the adjustment scale, you can look into the eyepiece with the naked eye and see a clear picture — the optics of the device will provide the necessary correction. It is much more convenient than watching through glasses. However one should not forget that the correction range (see below) is usually small, and in case of serious visual impairments, the capabilities of the binoculars may not be enough; but such situations are still quite rare. In binoculars (see "Type"), this adjustment is usually carried out for each eyepiece separately, because The diopters required for each eye may also be different. Features of the correction control depend on the type of focus (see below). With separate focus, each eyepiece is adjusted with its own regulator, with the central one of the halves (usually the left) is regulated using a common focus handwheel, and the second with a separate knob on the eyepiece (although here there are separate regulators on both eyepieces).

Exit pupil diameter

The diameter of the exit pupil created by the optical system of a binocular/monocular. The exit pupil is called the projection of the front lens of the lens, built by the optics in the region of the eyepiece; this image can be observed in the form of a characteristic light circle, if you look into the eyepiece not close, but from a distance of 30 – 40 cm. The diameter of this circle is measured according to a special formula — dividing the diameter of the lens by the multiplicity (see above). For example, an 8x40 model would have a pupil diameter of 40/8=5mm. This indicator determines the overall aperture of the device and, accordingly, the image quality in low light: the larger the pupil diameter, the brighter the “picture” will be (of course, with the same quality of prisms and glasses, because they also affect the brightness). In addition, it is believed that the diameter of the exit pupil should be no less than that of the pupil of the human eye — and the size of the latter can vary. So, in daylight, the pupil in the eye has a size of 2-3 mm, and in the dark — 7-8 mm in adolescents and adults, and about 5 mm in the elderly. This point should be taken into account when choosing a model for specific conditions: after all, fast models are expensive, and it hardly makes sense to overpay for a large pupil if you need binoculars exclusively for daytime use.

Eye relief

The offset is the distance between the eyepiece lens and the exit pupil of an optical instrument (see "Exit Pupil Diameter"). Optimum image quality is achieved when the exit pupil is projected directly into the observer's eye; so from a practical point of view, offset is the distance from the eye to the eyepiece lens that provides the best visibility and does not darken the edges (vignetting). A large offset is especially important if the binoculars / monoculars are planned to be used simultaneously with glasses — because in such cases it is not possible to bring the eyepiece close to the eye.

Focus

The method of aiming the optics of binoculars (see "Type") for sharpness.

Central. In accordance with the name, focus in this case is carried out using a regulator (usually a rotary handwheel) located in the central part of the binoculars, between the halves. When such a flywheel is turned, both optical systems are adjusted simultaneously — this is convenient, because. allows you to quickly reconfigure the binoculars for different distances. On the other hand, such models are more complex in design than separate ones, have more weight and less reliability.

Separate. In models with this type of focus, each eyepiece is adjusted separately. This is not as convenient as the central control, but it allows you to reduce the weight, dimensions and price of binoculars, and also facilitates the creation of "protected" devices.

Automatic. The name in this case is not entirely true: we are not talking about automatic adjustment of optics, but about a fixed focus. Such binoculars do not require focus during use — they allow you to clearly see all objects in the range from the minimum focus distance to infinity, and the observer's eye itself performs the necessary adjustment (similar to what happens when viewing objects at different distances with the naked eye). Models of this type are very convenient for observing on the move, especially when th...e distance to the observed object is constantly changing, as well as in situations where the exact location of the appearance of this object is unknown — they allow you to "target" as quickly as possible and without unnecessary movements. As a result, autofocus is considered optimal for watching sports, wildlife, and the like. The main disadvantage of autofocus can be called the fact that it noticeably tyres the eyes — especially when alternating between the naked eye and the use of binoculars.
Sigeta Spirit 10x25 WP often compared
BRESSER Nautic 8x25 WP often compared