Comparison Dahua HAC-HFW1500CM-IL-A-S2 2.8 mm vs Dahua HAC-HFW1500CL-IL-A-S2 2.8 mm

Clear Table
Add to comparison
	Dahua HAC-HFW1500CM-IL-A-S2 2.8 mm	Dahua HAC-HFW1500CL-IL-A-S2 2.8 mm
	Outdated Product	from £39.99 up to £47.23 Compare prices 2
all specs only differences
TOP sellers	Find prices on Amazon.uk Find prices on eBay.uk	Amazon.co.uk £47.00 Buy in shop Tradeinn.com £40.00 Buy in shop
Mount	outdoor	outdoor
Body type	beamed	beamed
Connection	BNC	BNC
Camera features
Design and features	light sensor microphone IR illumination LED backlight	light sensor microphone IR illumination LED backlight
Number of LEDs	2 /1x IR, 1x LED/	4 /2x IR, 2x LED/
Illumination range	20 m /both lighting options/	20 m /both lighting options/
Matrix
Matrix type	CMOS	CMOS
Number of megapixels	5 MP	5 MP
Video resolution	2880x1620 px	2880x1620 px
Frame rate	25 fps	25 fps
Minimum illumination	0.05 lux /0.005 lux B/W/	0.05 lux /0.005 lux B/W/
Aperture	f/1.6	f/1.6
Signal to noise ratio	65 dB	65 dB
Backlight compensation	DWDR+BLC	DWDR+BLC
Lens
Focal type	permanent	permanent
Focal length	2.8 mm	2.8 mm
Horizontal viewing angle	106 °	106 °
Vertical viewing angle	56 °	56 °
General
Power source	12 В	12 В
Power consumption	3.1 W	4.5 W
Operating temperature	-40 °C ~ +60 °С	-40 °C ~ +60 °С
Maximum humidity	95 %	95 %
Protection level	IP67	IP67
Material	metal	plastic
Dimensions	167x70x70 mm	163x70x70 mm
Weight	330 g	190 g
Color
Added to E-Catalog	september 2023	september 2023

Number of LEDs

The number of backlight LEDs (see "Design and capabilities") provided in the camera design.

Theoretically, more LEDs provide more power and, accordingly, range (see below) and efficiency of IR illumination or LED illumination. However, in fact, such light sources can vary markedly in performance; in addition, a lot also depends on the features of the camera itself. Therefore, in fact, this indicator is a reference, and when choosing, it makes sense to pay attention to parameters that are closer to practice — in particular, the same backlight range (see below).

Power consumption

The power consumed by CCTV cameras during operation. Knowing the indicator of energy consumption, you can, for example, calculate the battery life of equipment from an uninterruptible power supply or choose a suitable “uninterruptible power supply”. Also, with the support of PoE technology, it is worth considering the power consumption when choosing a PoE switch or PoE adapter.

Material

The main material used in the construction of the camera body.

— Plastic. Inexpensive and at the same time quite practical material. Plastic is light, quite strong (not as strong as metal, but still quite sufficient for most cases), chemically inert (and therefore not susceptible to corrosion and insensitive to moisture), and also has a relatively low thermal conductivity (which provides additional protection for extreme temperature fluctuations). Due to all this, this material is very popular in indoor chambers (see "Usage"). At the same time, it is somewhat less suitable for outdoor work.

— Metal. The main advantage of metal, in comparison with plastic, in the case of surveillance cameras is high strength and reliability. This allows you to use it even for street models that work in difficult conditions and must have a certain anti-vandal resistance (at least not immediately “give up” when trying to break or break). At the same time, such material is much more expensive, and therefore less common.