Comparison Bosch GWS 18V-10 PSC Professional 06019G3F0D vs Bosch GWS 18V-10 SC Professional 06019G340D

Clear Table
Add to comparison
	Bosch GWS 18V-10 PSC Professional 06019G3F0D	Bosch GWS 18V-10 SC Professional 06019G340D
	Outdated Product	£275.00 Compare prices 1
all specs only differences
TOP sellers	Find prices on Amazon.uk Find prices on eBay.uk	MachineMart.co.uk £275.00 Buy in shop
Main	Drop Control function — immediate shutdown of the tool in the event of an accidental fall to the floor. Simply Connected System — Personalize your instrument via Bluetooth (Low Energy GCY 42 module included).	Drop Control function — immediate shutdown of the tool in the event of an accidental fall to the floor. Simply Connected System — Personalize your instrument via Bluetooth (Low Energy GCY 42 module included)
Type	angle grinder	angle grinder
Specs
Rotation speed	4500/6000/9000 rpm	4500 – 9000 rpm
Max. disc diameter	125 mm	125 mm
More features	speed controller safety lock-off electronic motor protection brushless motor motor brake safety clutch display smartphone synchronization keyless disc change	speed controller safety lock-off electronic motor protection brushless motor motor brake safety clutch display smartphone synchronization keyless disc change
In box	additional handle battery charger GAL 1880 CV case (bag) module Low Energy GCY 42	additional handle battery charger GAL 1880 CV case (bag) module Low Energy GCY 42
General
Power source	battery	battery
Battery in set	2	2
Battery platform	Bosch Professional 18 V	Bosch Professional 18 V
Battery voltage	18 V	18 V
Battery capacity	5 Ah	5 Ah
Battery type	GBA 18V 5.0Ah	GBA 18V 5.0Ah
Compatible batteries	GBA 18, ProCORE 18	GBA 18, ProCORE 18
Charging time	45 min	45 min
Noise level	90 dB	90 dB
Weight	2.62 kg	2.8 kg
Added to E-Catalog	november 2021	may 2019

Rotation speed

The speed of rotation of the working attachment, which is capable of providing a grinder of the appropriate design (for example, angle — see "Type"). If the device has speed control, this paragraph shows the range of such adjustment, from minimum to maximum.

It makes sense to compare by this parameter units belonging to the same type and having the same maximum diameter of the disk (or other working nozzle). The latter is due to the fact that the larger the disk, the faster its edge moves (at the same speed); i.e. a larger diameter requires less RPM for the same performance/efficiency. In general, when comparing different models, the following should be taken into account. The higher rotation speed is well suited for large volumes of work (because it improves productivity) as well as for fine polishing with “delicate” nozzles. A lower setting, in turn, improves accuracy (reduces the chance of removing excess material), as well as provides more torque and allows you to more effectively deal with hard, stubborn materials. More detailed recommendations for different types of work and different nozzle diameters can be found in special sources; here we note that an increase in the rotation speed, usually, affects the cost of the machine compared to analogues (since this requires a more powerful engine). In addition, discs and other attachments may have maximum RPM limits.

Weight

The total weight of the grinder; for battery models (see "Power Source"), usually, it is indicated without taking into account the battery.

This indicator has two meanings. On the one hand, light weight has a positive effect on manoeuvrability and reduces fatigue during work — especially when processing vertical surfaces and ceilings, as well as in other situations where the tool has to be held on weight. On the other hand, for grinders with a vibrational principle of operation (see "Type"), used for processing horizontal surfaces, a significant weight is considered optimal: it allows the tool to fit closer to the material being processed, and also contributes to stability and retention. So when choosing such a model by weight, it is worth considering the features of its intended application.