Dark mode
United Kingdom
Catalog   /   Tools & Gardening   /   Garden Power Tools   /   Lawn Mowers

Comparison Huter GET-1700B vs BauMaster GT-3526

Add to comparison
Huter GET-1700B
BauMaster GT-3526
Huter GET-1700BBauMaster GT-3526
Outdated ProductOutdated Product
TOP sellers
Typegrass trimmergrass trimmer
Motor typeelectric (mains)electric (mains)
Mowing
Cutting width42 cm42 cm
Trimmer blade width25.5 cm23 cm
Cutting systemrotaryrotary
Trimmer design
Motor locationtoptop
Shaft typestraightstraight
Handle typebike handlebike handle
Line diameter2 mm
More features
foldable shaft
shoulder
foldable shaft
shoulder
In box
Nozzles
2-tooth blade
spool of line
2-tooth blade
spool of line
Motor
Motor power1700 W2600 W
Soft start
General
Deck materialplasticplastic
Weight5.32 kg4.42 kg
Added to E-Catalogmay 2019march 2018

Trimmer blade width

The width (diameter) of the trimmer knife characterizes the size of the paddle knife (or saw blade). Such a nozzle has a smaller capture width than a fishing line, however, it allows you to mow more dense thickets, including shrubs.

Line diameter

The diameter of the fishing line supplied with the trimmer (more precisely, with a reel attachment, see "Tips").

In modern models, this parameter can be from 1 to 4 mm. At the same time, a thicker fishing line handles better with dense thickets, but it works rougher, the treated lawn is not particularly even, and for the effective operation of such a nozzle, a fairly powerful engine is needed. On the other hand, a fine line provides a clean and neat cut, but is not suitable for heavy vegetation and large stems. Thus, thick fishing line is usually equipped with powerful units designed for "launched" lawns with an abundance of thick stems. Thin, on the other hand, is found mainly in low-power electric trimmers with a lower engine location, designed for neat lawns with regularly cut grass.

We also recall that many trimmers have the ability to replace the standard reel with another one that differs in line thickness.

Motor power

Lawnmower engine power expressed in watts. This designation is used absolutely for all electric models (see "Engine type"), and it is also often found in gasoline and diesel units along with horsepower (these units are clearly related, 1 hp is about 735 watts).

In general, the more powerful the engine, the more performant the mower and the better it will cope with heavy work such as cutting thick grass, bushes, etc. On the other hand, high power has a corresponding effect on fuel / electricity consumption, as well as the weight and price of the engine. In addition, note that the power requirements depend on the type of mower itself and its engine (see above for both). For example, for most robots, the power does not exceed 500 W — more, taking into account specialization, is not required, besides, otherwise the devices would turn out to be too bulky and heavy. Trimmers and lawn mowers of similar power are only electric, and the power limit for power tools is 2500 – 3000 W when powered from the mains and 1500 – 2000 W for battery models. But in gasoline tools, the minimum power is about 500 – 1000 W for trimmers and 1000 – 1500 W for mowers; the maximum value can exceed 4 kW.

Detailed recommendations for choosing a lawn mower d...epending on its type and features of the planned work can be found in special sources.

Soft start

The presence of a soft start system in the lawn mower engine.

The design features of electric motors are such that when power is applied directly, the start occurs very abruptly — both in a mechanical and electrical sense. Firstly, the engine itself spins up in a jerk, in a very short time, which increases the wear of its parts. Secondly, at the moment of start-up, there is a sharp jump in current strength, which creates significant loads on the power grid (or the batteries of the unit). The soft start system eliminates these phenomena: it limits the starting current, allowing the motor to accelerate smoothly and preventing voltage surges.

On the other hand, additional electronic circuits affect the cost, sometimes quite significantly. So there are few models with this feature nowadays, and you should pay attention to them mainly in cases where the mentioned advantages are of fundamental importance — for example, if the device is purchased for a house with weak wiring that does not tolerate voltage surges.
BauMaster GT-3526 often compared