United Kingdom
Catalog   /   TVs & Video   /   Camcorders & Accessories   /   Camcorders

Comparison Canon EOS C300 Mark II vs Canon EOS C500

Add to comparison
Canon EOS C300 Mark II
Canon EOS C500
Canon EOS C300 Mark IICanon EOS C500
from £8,638.00 
Outdated Product
from £9,885.00 
Outdated Product
TOP sellers
Featuresprofessionalprofessional
Media typeflash (memory card)flash (memory card)
Sensor
Sensor type
CMOS /24.6x13.8 mm/
CMOS /24.6x13.8 mm/
Sensor sizeAPS-CAPS-C
Number of megapixels9.849.84
Effective megapixels8.858.85
Camera lens
Interchangeable lens
Bayonet (mount)
Canon EF /Canon PL/
Canon EF /Canon PL/
Image stabilizationoptical
Manual focus
Video shooting
Video resolution4096x2160 px4096x2160 px
Frame frequency120 fps120 fps
Video recording speed110 Mbps, 50 Mbps, 35 Mbps, 24 Mbps50 Mbps, 35 Mbps, 25 Mbps
Minimum illuminance0.25 lux
Shutter speed1/1—1/2000 с1/3 — 1/2000 с
White balance
auto, daylight, incandescent, preset 1 /preset 2/
auto, daylight, incandescent, kelvin /preset 1, preset 2/
Pre-recording (Pre-Rec)
Sound recording16-bit/24-bit 48 kHz, 4ch/2chPCM 16bit (2ch, 48kHz)
Photo
Number of megapixels2.22.07
Max. photo size2048x1080 px1920x1080 px
Picture while shooting
Screen
Screen size4.3 "4 "
Screen resolution1230 K pixels1230 K pixels
Features
Features
viewfinder
hot shoe
built-in speaker
detachable microphone
viewfinder
hot shoe
 
detachable microphone
Memory and sockets
Memory card supportCFast, SD, SDHC, SDXC (Class 4 or higher)SD, SDHC, Compact Flash
Memory card slots2
Connectors
HDMI
 
microphone input
XLR microphone input /2 pcs/
headphone jack
HDMI
SDI /HD-SDI, BNC/
microphone input
XLR microphone input /2 pcs/
headphone jack
Battery
Battery typeBP-A30BP-955
Battery capacity3100 mAh4900 mAh
Battery life1.3 h
General
Remote control
Dimensions (WxHxD)
190x307x362 mm /with handle, holder, bracket, handle, display/
160x179x171 mm /camera body only/
Weight1750 g
1820 g /camera body only/
Color
Added to E-Catalogjune 2016april 2013

Image stabilization

An image stabilization method provided in the design of a video camera. The stabilization function itself is designed to compensate for small camera shakes so that they are not noticeable in the image. This is especially true when shooting handheld, and in fact most modern models are designed specifically for such usage. According to the method of work, there are such options:

Optical. A special mechanism with a system of gyroscopes and movable lenses, installed directly in the lens, is responsible for the operation of such stabilization systems. It introduces a correction for all tremors, vibrations, etc., and the “picture” falls on the already stabilized sensor. Optical systems are considered the most advanced and efficient, because. their work allows you to use the entire area of the sensor, fully exploit its capabilities and provide good image quality. Among the shortcomings, it is worth noting the increase in the cost and weight of the cameras, as well as a slight decrease in the reliability of the optics. At the same time, these moments are most often not critical, and stabilizers of this type can be used even in simple and inexpensive models.

— Electronic. Electronic stabilization is carried out due to the fact that not the entire area of the sensor, but only some of it, is involved in the formation of an image for a frame. Simply put, the camera electronics "takes into account" a certain area of the sensor and...transfers the image from it into the frame; and at small displacements, this "area of attention" is also displaced, due to which the visible image remains motionless. The advantages of electronic systems are simplicity of design, lightness, compactness and high reliability; they can be used with even the simplest lenses installed in pocket cameras (see “Features”). Their main disadvantage is the need to reserve a part of the sensor, which reduces the size and resolution of the actually involved area and adversely affects the image quality.

— Optical / electronic. In such systems, both the methods described above are used — both the mechanism in the lens and the reserve on the sensor. This provides extremely high vibration compensation efficiency — the image remains stable even in such conditions in which any single method would be useless. On the other hand, the disadvantages of both options also remain relevant, and the cost of cameras with this feature is quite high.

Video recording speed

The data transfer speed provided by the camera when recording video. This parameter is also called bitrate (i.e., the number of bits per unit of time). For any file format used for recording, the general rule is that the higher the bitrate, the better the image quality (especially for formats that use lossy compression). On the other hand, high speed have appropriate requirements for the capabilities of the memory cards used — for more details, see "Memory card support"; and it increases the size of the file accordingly. Therefore, many modern camcorders are able to work with different bitrates; this allows you to choose the best option depending on what is more important for you at the moment — maximum quality or the ability to work with a slow card.

At the same time, we note that in terms of quality, this parameter is important mainly for professional video shooting. If you need a camera for amateur purposes, there is no need to look for the maximum bitrate: after all, such models (and memory cards for them) cost accordingly.

Minimum illuminance

The lowest illumination of the scene being shot, at which the camera is able to provide an image of normal quality. Note that in devices with a night view function (see below), this parameter can be specified in different ways. In some models, minimal illuminance is implied, in which the camera can shoot without backlight and at the same time maintain colour reproduction (as in normal daytime shooting); in others — an "absolute" minimum of light, below which it is impossible to use even the night mode. This point should be clarified according to the official documents of the manufacturer.

Anyway, the lower this indicator, the less light the camera needs to work and the better it handles with shooting at dusk or even at night. Thanks to the use of special technologies, some models are able to work even in complete darkness, with an illumination of 0 lux; this is due to the fact that modern sensors are able to perceive infrared radiation invisible to the eye. However, more often than not, shooting still requires a certain amount of light — at least tenths of a lux. For comparison: an illumination of 0.1 lux approximately corresponds to a lunar night with a “half” phase of the moon, and 1 lux is comparable to a bright full moon in southern latitudes.

Shutter speed

The range of shutter speeds in which the camera is capable of operating during the shooting process.

Initially, shutter speed is the time during which light affects the photosensitive material (film) when shooting a single frame. For digital sensors, this is the period of time during which an image is read from the sensor to build a separate frame. When shooting video, this interval cannot be more than 1/n, where n is the frame rate (see above), but it can be less — for example, shooting at a frame rate of 30 fps and shutter speed of each frame 1/60 s. There are no such restrictions for the photo mode.

Long exposures are good because they allow the sensor to take in more light — accordingly, the “picture” is brighter, which is especially important in low light. At the same time, they increase the likelihood of getting a blurry image — due to the rapid movement of objects in the frame, the operator's hand shaking and other random camera movements that even the stabilization system is unable to compensate for. This effect can be useful for artistic motion blur, especially when shooting video, but in photo mode it is most often undesirable. Fast shutter speeds, on the other hand, allow you to get clear shots, but with less light, and in the case of video, even with the effect of sharp, jerky movements.

Accordingly, different exposure time options will be optimal for each situation, and the wider their range, the more opportunities the came...ra has to adjust to specific conditions.

White balance

Presets and white balance adjustment modes provided by the camera.

White balance is a characteristic that describes the qualities of the lighting of the scene and the distortion that this lighting introduces into the colours perceived by the camera. Its used because modern digital sensors are unable to independently adjust to different light sources, as the human eye does. In fact, this means that the same object shot under lighting with different colour temperatures (for example, under a “warm” incandescent lamp and a “cold” fluorescent lamp) will look different without adjustment. To avoid this, the white balance setting is applied.

The main options for such a setting used in modern cameras are as follows:

— Auto. In accordance with the name, in this mode, the camera electronics independently evaluates the specifics of the illumination of the scene being shot and makes appropriate corrections to the colour reproduction. This adjustment is the most convenient for the operator, because. does not require any additional actions from him — everything is done by automation. At the same time, no such adjustment system is perfect, and does not always provide 100% white balance for the current situation. Therefore, even in the simplest models like pocket ones (see "Features"), this option is rarely the only one, not to mention professional equipment.

— Presets. The ability to select white balance from several options that correspond to...standard shooting conditions — for example, “sunny day”, “cloudy”, “fluorescent lamp”, “incandescent lamp”, etc. Such a system is quite simple even for inexperienced users and at the same time quite reliable and versatile, although its specific capabilities directly depend on the number of presets.

— Manual. Manual white balance setting assumes that the operator himself “tells” the camera which object to consider pure white — based on this, the electronics calculate the lighting characteristics (unlike automatic mode, when the reference object is also determined without user involvement). The easiest way to do this is to use a regular sheet of paper, but the procedure also works with neutral grey objects. Manual mode allows you to very accurately set the white balance for a particular scene, but it requires some time and appropriate skills — and therefore is used mainly in professional camcorders.

— Temperature control. This function allows you to set a specific value for the colour temperature of the light source (in kelvins) — it is this temperature that will correspond to the white balance when shooting. This setup format is faster and more convenient than manual setup, but is not widely used. This is due to the fact that it is well suited only for studio conditions, where the characteristics of each light source are precisely known — in other cases, manual adjustment is usually more reliable.

Sound recording

The format in which the camera records sound during video recording. Typically, this section indicates the number of channels and the sound system used, the file format, or the characteristics of the audio stream, such as "2ch Dolby Digital (AC-3)" or "PCM, 16bit 48kHz, 2ch". In order not to go into technical details, we note that two channels are the minimum required for surround sound (stereo), and advanced models can work with multi-channel sound like 5.1. As for other specifications, you should pay attention to them when choosing a professional device (see "Features") — in amateur and especially pocket cameras, the sound format does not play a special role. Specific features of various formats are described in special sources.

Number of megapixels

Effective resolution of the camera sensor when working in the photo shooting mode; in other words, the number of points or pixels that are directly involved in this mode (1 megapixel corresponds to a million points). The maximum size of a photo (see below) directly depends on this parameter: in fact, the number of megapixels corresponds to the size of the image vertically and horizontally, multiplied by each other. For example, a resolution of 3264x2456 corresponds to 8,016,384 pixels, or approximately 8.02 megapixels.

As with traditional digital photography, numerous megapixels allows you to get more detailed images with better visibility of fine details. However, as the resolution increases with the same sensor size, the size of each individual pixel and the amount of light falling on it decrease, which increases the likelihood of noise and generally reduces the quality of the picture.

Max. photo size

The largest photo size that can be taken with the camera. It is customary to designate it in points (pixels), with two numbers corresponding to the horizontal and vertical dimensions — for example, 2048x1536. This parameter directly determines the effective resolution of the sensor when photographing; see "Number of Megapixels" above for details.

Picture while shooting

Possibility of taking photos during video recording. Usually it is implemented by a separate button, when pressed, the camera captures the visible image as a photo without interrupting video recording.

Of course, modern technologies allow you to save individual frames from an already finished video, but simultaneous photography compares favorably in two ways. Firstly, the resolution of the “picture” in photo mode is often higher than in video recording, and secondly, the procedure of processing a photo differs from the method for processing video frames and allows you to get a better image. So if you need the ability to highlight individual moments in the filmed events, it makes sense to choose a model with this function.
Canon EOS C300 Mark II often compared
Canon EOS C500 often compared