Comparison WetAir WFD-K1000S vs DEX DFD-1010S
Add to comparison |  |  |
|---|---|---|
| WetAir WFD-K1000S | DEX DFD-1010S | |
| Outdated Product | Outdated Product | |
| TOP sellers | ||
| Type | dehydrator (horizontal dryer) | dehydrator (horizontal dryer) |
| Drying levels | 10 pcs | 10 pcs |
| Tray size | 390x380 mm | 395x380 mm |
| Total capacity | 56 L | |
| Power consumption | 1100 W | 1100 W |
Specs | ||
| Thermostat |  | |
| Pastila tray | 1 pcs | 1 pcs |
| Mesh for herbs and spices | 1 | 1 |
| Temperature range | 35 – 75 °C | 35 – 75 °C |
| Location of the fan (heater) | rear | rear |
| Control | touch controls | touch controls |
| Shutdown timer | | |
| Overheat protection | | |
| Tray material | stainless steel | plastic |
| Dimensions | 430x535x417 mm | 430x417x537 mm |
| Weight | 16.8 kg | 16.5 kg |
| Added to E-Catalog | february 2023 | august 2021 |
Compare WetAir WFD-K1000S and DEX DFD-1010S
You may be interested in
WetAir WFD-K1000S often compared
DEX DFD-1010S often compared
Glossary
Tray size
Horizontal dimensions of one dryer tray.
For round models, this paragraph usually indicates the diameter (for example, “Ø250”), for other cases — the length and width. Anyway, the information about the size allows you to estimate the total area and, accordingly, the capacity of the device. At the same time, note that a larger size affects the dimensions and weight of the structure, and also requires more heating power (ceteris paribus).
For round models, this paragraph usually indicates the diameter (for example, “Ø250”), for other cases — the length and width. Anyway, the information about the size allows you to estimate the total area and, accordingly, the capacity of the device. At the same time, note that a larger size affects the dimensions and weight of the structure, and also requires more heating power (ceteris paribus).
Total capacity
The total volume of all dryer trays. The larger the volume, the more products can be loaded into the device at a time. For modern dryers, a capacity of up to 10 L is considered relatively small, from 11 to 15 L — medium, from 16 to 20 L — high, and the largest models can hold more than 20 L.
Note that if you plan to dry several different types of fruits or vegetables at the same time, it is worth considering not only the total volume of the dryer, but also the number of trays (see above).
Note that if you plan to dry several different types of fruits or vegetables at the same time, it is worth considering not only the total volume of the dryer, but also the number of trays (see above).
Tray material
The material from which the complete trays of the dryer are made.
— Plastic. Inexpensive, but at the same time very practical material. In terms of strength and overall reliability, the plastic is inferior to metal, however, during normal use of the dryer, this difference is not noticeable. In addition, if such trays are made in the form of complete compartments, their walls can be made transparent so that you can observe the contents without interrupting the process and without knocking down the temperature regime. However the transparent walls gradually become cloudy due to the low resistance of plastic to scratches — however, it takes a lot of time for this moment to become a serious inconvenience. Thus, most modern dryers use plastic trays.
— Stainless steel. The main advantages of metal trays are strength and resistance to overheating. On the other hand, these advantages rarely turn out to be significant, and steel is more expensive than plastic. In addition, if metal trays are made in the form of separate compartments, they are opaque, and to check the condition of the products, you will have to open these compartments, lowering the temperature and disrupting the process. . For models with a rear fan (see above), this point is not relevant — they usually have a transparent door; however, such devices are not cheap. Thus, this tray material is rare nowadays — mainly among advanced dryers.
— Plastic. Inexpensive, but at the same time very practical material. In terms of strength and overall reliability, the plastic is inferior to metal, however, during normal use of the dryer, this difference is not noticeable. In addition, if such trays are made in the form of complete compartments, their walls can be made transparent so that you can observe the contents without interrupting the process and without knocking down the temperature regime. However the transparent walls gradually become cloudy due to the low resistance of plastic to scratches — however, it takes a lot of time for this moment to become a serious inconvenience. Thus, most modern dryers use plastic trays.
— Stainless steel. The main advantages of metal trays are strength and resistance to overheating. On the other hand, these advantages rarely turn out to be significant, and steel is more expensive than plastic. In addition, if metal trays are made in the form of separate compartments, they are opaque, and to check the condition of the products, you will have to open these compartments, lowering the temperature and disrupting the process. . For models with a rear fan (see above), this point is not relevant — they usually have a transparent door; however, such devices are not cheap. Thus, this tray material is rare nowadays — mainly among advanced dryers.