Efficiency
Efficiency of the autoinverter.
Efficiency is the ratio (in percent) between the amount of energy that the device delivers to the load and the amount that it consumes from the vehicle's on-board network. Accordingly, the higher this indicator, the more efficient the work and the less loss during conversion. In fact, this means that, other things being equal, a device with a higher efficiency will allow the load to run longer on battery power; this is especially important at high power consumption.
In modern auto inverters, efficiency values of 80 – 85% are considered average, 90% or more are good.
USB-A
Number of
USB outputs in the auto-inverter design.
USB A is a standard (but already outdated) connector used in computer technology for various peripheral devices. It was originally intended for information exchange, but is intended for portable gadgets (smartphones, tablets, players, etc.) charged via USB. Actually, in autoinverters this port is used exclusively as a charging connector; and several of these connectors allow you to connect several charging devices at the same time.
USB C
USB type C ports are smaller in size compared to classic USB A, and they also have a convenient double-sided design that allows you to connect the plug to either side. The interface is designed in such a way that it can implement various advanced features: increased power supply, fast charging technologies, etc. As a rule, the total number of USB type C on board auto-inverters is limited to one port.
Low battery alarm
The presence in the auto inverter
of the low battery alert function to which the device is connected.
This function significantly reduces the risk of “landing” the car battery through the use of an inverter and at the same time eliminates the need to manually monitor the battery status. The alarm, usually, reacts to the voltage at the input: with a significant decrease, indicating a deep discharge, the device gives a warning signal. Many models also have the function of automatic shutdown some time after the alert is triggered (by timer or when the voltage drops to the maximum allowable). The sensitivity threshold is usually adjusted in such a way that after the alarm is triggered and the inverter is turned off, the battery is still able to start the car engine.
Remote control connection (RJ-45)
The presence of
an RJ-45 connector allows you to connect a wired remote control to the inverter. Using a cable with RJ-45 connectors at both ends, the auto-inverter is connected to the remote control for remotely turning on/off the device, setting parameters, monitoring system status, etc. It is worth noting that the remote control is not always included in the kit; you will often need to purchase it separately.
Remote control
The kit includes
a remote control that allows you to coordinate the functions of the auto-inverter at a distance. The convenience here is obvious - the remote control provides the ability to control the operation of the device remotely, without approaching it. This can be useful if the car inverter is installed in a hard-to-reach place. Note that the remote control usually bears the simplest functions, such as simply turning the device on and off.
Dimensions
General dimensions of the autoinverter.
In modern cars (especially passenger cars), usually, there is not much space for installing additional equipment. This parameter allows you to estimate the space required to place the inverter, make sure that the selected device fits into the “footprint”, and, if necessary, choose another location or another model. At the same time, it must be remembered that for many auto-inverters a certain margin is needed in place — for the normal operation of the cooling system; this margin is usually specified in the detailed documentation.
