Comparison Casio Edifice EFB-108D-1A vs FESTINA F20005/4

The country of origin of the brand under which this watch brand is produced. Usually, the headquarters of the manufacturer is located in the same country. But production facilities may be located in another country, or even in several countries. Most of the brands under which modern watches are produced come from the following countries (in alphabetical order): Austria, England, Germany, Denmark, Spain, Italy, Korea, Russia, USA, France, Switzerland, Japan.

Note that in the modern world, the quality of a product is very weakly related to its country of origin (both claimed and actual). Much more it depends on how carefully one or another manufacturer controls the quality in their production. So when choosing, it makes sense to focus not so much on “nationality” as on the overall reputation of a particular brand.

Official mark used for watches made in Switzerland.

Switzerland is actually the "world capital" of watchmaking, products from this country are considered the standard of quality. However, not every watch brand officially registered in Switzerland has a production in this country. In order to distinguish “real Swiss watches” on the market, the Swiss Made label was introduced. To receive such a marking, the watch must meet several formal requirements at once, prescribed in the legislation of the country — namely:

— have a Swiss mechanism;
— this mechanism must be installed in Switzerland;
— there the clock must pass the final check.

In turn, the movement is considered Swiss if it is assembled and tested locally, and also contains at least 60% of Swiss components (by value, excluding the cost of assembly).

It is worth noting that there are loopholes in the “Swiss Made” law that allow not too scrupulous manufacturers to actually bypass the criteria specified in the law, formally fulfilling them. For example, most of the movement assembly work can be carried out at a factory in Asia, but if the last wheel is installed in Switzerland, the movement can already be considered assembled in Switzerland. So when buying a “Swiss Made” watch, it doesn’t hurt to clarify how carefully a particular brand follows official requirements. Nevertheless, in general, such watches are superior in quality to analogues from other countries (but how much...this difference corresponds to the difference in price is another question).

The watch has a separate second hand. Note that the location and features of the operation of such an arrow may be different. So, in some watches it is installed on the same axis with the rest of the hands, in others a separate small dial is provided for counting seconds. On some models, the second hand is part of the chronograph (see Features/Features) and only moves when the chronograph is on.

How to illuminate the clock face.

— Luminescent coating. A variant used in pointer dials: the hands, and sometimes the scale, are coated with a “phosphorus” coating that glows in the dark. This method of backlighting is inexpensive and can be used even in low-cost models; in addition, it does not require batteries and is suitable even for mechanical watches. On the other hand, coverage is often not as effective as it should be. The fact is that for work it must be “charged” from the sun or another bright light source, and this “charge” is enough for an average of 5-6 hours, and already in the first couple of hours the brightness of the glow drops noticeably.

— Electronic. Illumination based on LEDs or other miniature light sources. Usually, it does not work constantly, but turns on and off by pressing a special button; the exception is LED dials (see "Dial Type"). The main advantage of electronic backlighting is efficiency: it is guaranteed to be enough to view the image on the dial. In addition, such systems do not depend on external illumination, in contrast to the luminescent coatings described above. On the other hand, the lighting requires a battery to operate; therefore, this type of illumination is found exclusively in quartz watches (see “Mechanism type”).

— Luminescent coating / electronic. Systems that combine both types of illumination described above. This option is f...ound mainly among models with combined dials: the hands are coated with a luminous coating, and the electronic backlight is intended mainly for displays and additional scales (and also as a backup option for the hands). The combined backlight is very convenient, however, such watches are somewhat more expensive.

— Tritium illumination. Illumination option found on premium pointer dials. Miniature flasks filled with tritium, a radioactive form of hydrogen, are responsible for the illumination in such models; from the inside, the surface of such flasks is covered with a phosphor, which glows under the influence of tritium radiation. Separately, we note that this radiation does not pose a danger to humans: it does not go beyond the bulb, and even inside its intensity is extremely low. Tritium illumination is expensive, but it is extremely convenient from a practical point of view: "flashlights" work constantly, without batteries and regardless of external lighting, and shine significantly brighter than a conventional luminescent coating. However due to the decay of tritium, they gradually lose their brightness, but this happens very slowly: it takes 12 years to reduce by half, and at least 20 years for the backlight to become useless.

A safety plate in the area of the crown ensures that this weak spot is protected from damage and leaks. The crown protection systems are the guarantors of shock resistance and water resistance of watches.

The nominal size of a watch case in diameter (for round cases) or width (for other options, see "Case Shape"). In the most miniature modern models, this size is 21 – 25 mm or even less, among the largest there are cases of 46 – 50 mm and even larger.

Larger watches are more convenient in the sense that the dial readings are better visible on them, and it is easier to provide various additional functions in the design. On the other hand, small watches look neater and create less discomfort directly when worn. In addition, female models (see "Gender") are traditionally made more miniature than male ones. So the choice for this indicator depends mainly on the intended specifics of the application: for example, large cases are best suited for outdoor activities and tourism, about 41 – 45 mm in size, for household wear (regardless of gender) — about 31 – 35 mm, and as an accessory to an evening dress, a small watch of 30 mm or less would be more appropriate.

Also note that the size of a compatible strap/bracelet is associated with this indicator — see "Strap Width" for details.

The thickness of the watch case. A fairly obvious parameter; we only note that nowadays it is customary to attribute watches with a thickness of less than 7 mm to ultra-thin models. This design has both aesthetic and quite practical meaning — a thin watch will be useful for those who wear narrow sleeves with tight-fitting cuffs.

Total weight of the watch. As a rule, it is indicated taking into account the complete strap/bracelet.

The lightest modern watch weighs no more than 50 g. The most popular models weigh 50 - 100 g, and weight more than 150 g most often means not only a large, but also a fairly advanced device, usually for sports and tourism purposes.

Both light and heavy weight have their advantages: light watches create minimal inconvenience when worn, while massive watches are subconsciously perceived as a solid and reliable device.