Comparison Metabo RWE 1200 614048000 vs Einhell Expert TE-MX 1600-2 CE

The useful power of the tool is the maximum power that it can deliver to the working nozzle. This power is always less than the power consumed (see below), since part of the electricity inevitably goes to heat and friction in the tool mechanisms. In addition, this parameter is not given for every model, often information in the characteristics is limited to power consumption. Nevertheless, the actual capabilities of the tool directly depend on the net power: the higher it is, the greater the speed and/or torque this model is able to develop, the easier it is for it to cope with tasks that require high efforts. So, to compare different devices with each other, it is best to use this parameter (of course, you can only compare models of the same type or similar in type).

Also note that high working power is not always an advantage: it accordingly affects the dimensions, weight and price of the tool, while in fact high speeds and efforts are not always necessary. Detailed recommendations on the optimal values for different tools and different types of work can be found in special sources.

The power consumed by the construction mixer (see "Device") during operation. High power provides the device with high performance — such a model can easily cope with complex tasks, such as mixing a large volume of mixture at a time or while working with heavy fillers, such as crushed stone. On the other hand, high power affects the power consumption of the device, its weight, dimensions and cost. It makes little sense to purchase a powerful model if you select a tool for domestic use from time to time.

The rotation speed of the nozzle or mixing container provided by a plaster mixers. High rotation speed devices work best with paints, varnishes and glues. Low rotation speed models do a good job of preparing thick mixtures. Many modern plaster mixers and mixer-drills support the ability to adjust the speed (see "Features"), which allows user to choose the most optimal mode for a particular mixture. Powerful tools especially need a rotation under heavy load support system.

The vast majority of attachments for construction mixers have a standard size in length, usually 600 mm. But their diameter may differ, its maximum size is limited by the manufacturer, which must be considered when choosing. The indicator depends on the technical characteristics of the tool. The most popular sizes are 120mm, 140mm and 160mm nozzles. The larger the diameter of the auger, the easier it can cope with a large volume of mixed mixture.

The ability to switch speeds allows you to cope with various types of tasks: low speed and high torque are perfect for mixing viscous or heavy mixtures, and vice versa — high speed and low torque are better to cope with liquid materials such as paint, glue, etc.

Note that the support for two speeds provides the presence of a two-speed gearbox. At the same time, many modern construction mixers with a single-speed gearbox support the ability to smoothly adjust the speed of rotation of the nozzle (see "Functions / Capabilities").

Numerical value, expressed in liters, indicating the maximum volume of solution that the mixer can mix in one step.

— Soft start. This function allows you to avoid a sharp start of the engine at the beginning of work, which, on the one hand, allows you to avoid overloads on the power supply network, and on the other hand, splashing of building mixtures.

— Speed controller. The ability to adjust the speed of rotation of the nozzle of the working tool will be very useful for working with mixtures of different consistency. As you know, for effective mixing of liquid materials, a high speed is required, and for viscous materials, a lower speed, but a higher torque.

— Maintain momentum. With the help of special sensors, the speed control system monitors changes in load and, depending on this, increases or decreases the speed of the nozzle, thus maintaining the speed set by the user, regardless of the load. This ensures more efficient and better mixing and extends the life of the device.

— Power button lock. Locking the power button when the tool is off allows you to avoid accidental start in abnormal mode, which increases the safety of the device. And vice versa: locking when the tool is on eliminates the need to constantly keep your finger on the power button, which is very convenient, especially during long work.

— Electronic engine protection. The system provides automatic shut...down of the engine in case of overheating, jamming of the nozzle, or simply in case of a critical increase in load, which helps to avoid tool failure and extend its service life.

— Brushless motor. The presence of a brushless (brushless) motor in an electric tool. Such motors are noticeably superior to traditional collector motors in terms of efficiency, which can significantly reduce energy consumption without sacrificing power; this is especially important for cordless tools (see "Power Source"), where this feature is predominantly found. In addition, brushless motors are quieter and produce virtually no sparks during operation, making them perfect for working in high fire hazard environments. Their main disadvantages are traditional — the complexity of the design and high price.

— Charger. A device for charging the batteries used in the instrument with the appropriate power supply. For models supplied with such a device, the specefications may specify the charger model. This information can be useful not only for finding a spare or replacement charger, but also in case when there are other battery tools and/or batteries for them in the household. The fact is that many manufacturers nowadays use universal batteries compatible with a whole set of tools from the same brand; so, for example, a charger for a mixer may be quite suitable for a battery grinder from the same manufacturer.
On the other hand, a lot of modern battery tools are supplied without a charger at all. This option will be optimal, first of all, if a compatible charger is already available, and there is simply no need to overpay for a second device. In addition, the lack of a charger will be appreciated by those who want to choose this accessory separately, without relying on the manufacturer's decision.

— D-shaped handle. An additional handle in the shape of the letter D is provided for in the design of the device. It is found mainly in small and relatively light mixer drills, which can be used to create holes in wood or metal. Allows user to fix the position of the tool more firmly during operation.

— Hand protection. A small, usually metal frame is provided around the handle of the tool, wh...ich helps to avoids damage to the user's hands during operation. It is used mainly in powerful, performant construction mixers. It is not found in small drill mixers, since it is practically useless there.

— Mixing attachment. The tool is initially equipped with a mixing attachment. Its availability, on the one hand, allows you to get to work immediately after purchase, instead of looking for and buying an attachment separately, and on the other — not to worry about the compatibility of the tool and the attachment.

— Mixing container. The equipment of this tool initially provides a special container for mixing building mortar and other mixtures. Usually we are talking about professional stationary mixers, primarily designed to perform large-scale construction work.

— Case/pouch. Some construction mixers are equipped with special cases or covers for the convenience of storing and carrying both the device itself and its components, such as attachments or a key.

Note that the above list is not complete — other additional items may be supplied with modern tools

This refers to the weight of a fully assembled and ready-to-use construction mixer or drill mixer. What you need to pay attention to here is that the small weight of the device is not always its advantage. On the one hand, during operation, the tool has to be kept on weight, most often in a vertical position, which is very tiring. But on the other hand, heavy models are less susceptible to vibration, it is easier to fix them in one position.