United Kingdom
Catalog   /   Automotive   /   Parts & Car Electronics   /   Chargers & Jump Starters

Comparison Winso 139510 vs RZTK SBT 400

Add to comparison
Winso 139510
RZTK SBT 400
Winso 139510RZTK SBT 400
Expecting restockOutdated Product
TOP sellers
Devicechargercharger
Typeinverterinverter
Specs
Battery compatibility
WET/EFB (Lead-Acid)
AGM
GEL
 
WET/EFB (Lead-Acid)
AGM
GEL
LiFePO4
Battery voltage
 
12 V
6 V
12 V
Min. charging current2 А
Max. charging current6 А4 А
Current adjustmentautomaticautomatic
Battery capacity 12V4 – 150 Ah4 – 120 Ah
Features
voltmeter
charging indicator
pulse repair (desulfation)
overcharge protection
winter charging mode
battery storage mode
12 V supply mode
voltmeter
charging indicator
pulse repair (desulfation)
overcharge protection
winter charging mode
battery storage mode
12 V supply mode
General
IP codeIP65IP65
Power source230 V230 V
Wire length1.5 m1.55 m
Size85х52х185 mm
Weight0.63 kg
Added to E-Catalogdecember 2023november 2022

Battery compatibility

The parameter determines compatibility with batteries, that is, with what types of batteries a charger or start-charger or a car booster can be used. Incorrect charger operation mode promises overcharging of the battery, its swelling and failure.

WET / EFB (Lead-Acid). The abbreviation WET is used to designate traditional lead-acid batteries with a liquid electrolyte. EFB (Enhanced Flooded Battery) is their improved subtype with thicker pure lead plates and a positive electrode in a special microfiber envelope. Both transformer devices and most impulse batteries are suitable for charging acid batteries.

AGM. In the design of AGM batteries, the electrolyte is in an absorbed state: the compartments of such a battery are filled with porous fiberglass material, which contains acid. This type of battery is particularly sensitive to overcharging - it is necessary to select a suitable charger with a certain set of automatic functions for it.

gel. In gel batteries, the electrolyte is brought to a jelly-like state with the help of special thickeners. The key to choosing the right GEL battery charger is the ability to vary the amount of charging current depending on how badly the battery is discharged.

LifePO4. Lithium iron phosphate batteries are charged with constant voltage an...d current. As the voltage in the battery approaches the maximum value, the charge current should decrease, and after the end of the charging process, its supply should stop completely. To keep LiFePO4 batteries in good shape, devices with appropriate automatic functions are suitable.

Li-Ion. Lithium-ion Li-Ion batteries are charged in the same way as lithium-iron-phosphate counterparts. For them, you will need to pick up an automatic device with the ability to supply constant voltage and current.

Battery voltage

The nominal voltage of the batteries that the device can work with. For boosters (see "Type"), in this case, the voltage that the "starter" can output at the output in the engine start mode is indicated.

- 6 V. Voltage found in some motorcycles, scooters, ATVs and similar vehicles.

- 12 V. Standard voltage of batteries (and on-board networks) for passenger cars, as well as light trucks and minibuses.

- 24 V. Voltage used mainly in trucks, buses and other heavy equipment. Also found in some heavy SUVs.

Min. charging current

The smallest current that the charger can provide in charging mode. See "Maximum charging current.

This parameter in our catalog is indicated only for those models that have several current adjustments (see below).

Max. charging current

The highest current that the charger can provide in charging mode. For models with one current adjustment (see below), its value is also indicated in this paragraph.

Different battery models may differ in charging parameters, including over the optimum current range. Accordingly, it is worth choosing a charger in such a way that it matches this range. Detailed selection recommendations can be found in special sources — in particular, documentation for batteries.

Battery capacity 12V

The capacity of batteries with an operating voltage of 12 V, for which a starter charger can be used. As a rule, modern units are not designed for one specific value, but for a range of capacities, which greatly facilitates the search filter according to the required parameters.

Note that although the discrepancy between the rechargeable battery in terms of capacity is not as critical as in terms of current or voltage, this does not mean that this parameter should not be paid attention to. Both too capacious and too “small” a battery will cause the charger to work in an off-design mode, which is harmful to both the “charger” and the battery, and can even lead to accidents.

Wire length

The length of the power wires supplied with the starter charger.

In this case, most often they mean cables designed to connect the unit to the battery terminals (or to the on-board socket of the car being charged, see "Power — from the cigarette lighter"). The longer they are, the greater the "radius" of this model, the lower the likelihood that the wire is not enough to reach the contacts. On the other hand, excess length can create some discomfort.
RZTK SBT 400 often compared