Jet settings
The number of settings provided in the hand shower for top shower (see "Complete set").
If you have
several settings, change the jet features and, accordingly, adjust the shower to the user’s wishes. For example, one watering can provide «rain» (ordinary drops of medium size), «waterfall» (stream in the form of water wall) and «stream» (continuous jet under high pressure); there are other modes, their specific set for each model is worth specifying separately. In any case, the more settings - the wider the choice of the user, but the more expensive and more difficult the watering can be on the background of models with
one mode upper shower.
Switching settings with button
The feature of the manual shower structure allows you to change the modes not in the traditional way - rotating the switch or switching the lever, but by pressing a button.
Switching the settings of the manual shower with button is much more comfortable, given that in the shower hands are wet and turn the control or switch lever is not always convenient, let alone soapy.
Spout
— Cascade. In such vents, water is fed through an outlet in the form of a thin horizontal slit, or a wide trench (depending on the model). Due to this, the output achieves a large width of the jet at a low thickness, which provides a good throughput, as well as the original look, imitating the waterfall (hence the name). On the other hand, this form is less universal than the classical one, and it is much more expensive, and therefore is used quite rarely.
— Classic. Models in which the spout is made in the form of a tube. Such flows may have different shapes in length (straight, curved, with an angle) and cross-section (round, triangular, square, etc.), but they are all tubes.
In most cases, there is simply no drain for shower systems.
Spout length
The length of the spout characterizes the distance from the rod (in built-in ones from the wall) to the place where the water is poured out, i.e. the actual length of the conventional “spout” of the mixer.
Jet depth
Distance from the wall attachment point to the aerator. It is a characteristic that determines the “reach zone” of the faucet spout.
