Comparison Hansgrohe Pulsify S Showerpipe 260 24230000 vs Grohe Euphoria System 260 27296002

The number of settings provided in the hand shower for top shower (see "Complete set").

If you have several settings, change the jet features and, accordingly, adjust the shower to the user’s wishes. For example, one watering can provide «rain» (ordinary drops of medium size), «waterfall» (stream in the form of water wall) and «stream» (continuous jet under high pressure); there are other modes, their specific set for each model is worth specifying separately. In any case, the more settings - the wider the choice of the user, but the more expensive and more difficult the watering can be on the background of models with one mode upper shower.

The feature of top shower structure allows you to change the modes not in the traditional way - rotating the switch, but by pressing a button. Switching the upper shower settings by button is much more comfortable, given that the shower hands are wet and turn the control is not always convenient, much less soapy.

Water consumption during operation of the upper shower (cf. «Equipment»). Indicates the amount of water passing through the watering can with the tap fully open and the water pressure 3 bar (standard household water pressure).

The higher the bandwidth of the watering can be - the more powerful and intense the shower becomes. On the other hand, high water consumption is undesirable if you want to save water - for example, if you have meters installed or if water is supplied from a boiler with a small volume. In addition, it is worth remembering that the watering can have different settings and features of water supply. So, by selecting the lake with the right parameters, you can get a nice and effective top shower even when low water flow. Actually, a low value in this case is considered to be up to 10 l /min; the average is 10 - 20 l/min, and in the most productive watering can be up to 30 l/min and even more.

The top shower angle is tilted in both directions. Not all models have adjustment, and even those in which it is constructively laid have different angles. By itself the ability to adjust the inclination angle of the upper shower allows you to adjust the flow of water to the desired side for the needs of a particular user.

The size of the manual or hygienic shower head can be found (cf. «Complete»), which is equipped with a shower system. In fact, it implies the size of the working area - the area on which the nozzles for water supply are located. If this area is round or square, its size is indicated by diameter or width, for other shapes - by length.

Big size allows to cover more space at once; on the other hand, more compact models are more efficient, and cheaper, all other things being equal. And hygienic watering cans, taking into account the specifics of their use, by definition are made small.

The feature of the manual shower structure allows you to change the modes not in the traditional way - rotating the switch or switching the lever, but by pressing a button. Switching the settings of the manual shower with button is much more comfortable, given that in the shower hands are wet and turn the control or switch lever is not always convenient, let alone soapy.

The throughput capacity of a manual shower watering agent, in other words, the amount of water it gives out per minute when the faucets are fully open. Since the capacity is not only related to the design of the watering box, but also to the pressure in the water supply, it is customary to specify an average value - at a standard pressure of 3 bar.

The higher this parameter - the more intense the impact on the body can have a shower. At the same time, high water consumption can become a problem when there are water meters or when there are limited supplies - for example, if hot water is supplied by a boiler. Also note that , low throughput can be compensated by certain jet settings.

The length of hose for the shower head be supplied with a shower system of one type or another (see above). In most modern models, this parameter is about 140 - 160 cm - it is enough that even a tall man could easily rinse completely, from the top. In addition, some hoses can stretch 20-30% of their original length. So in practice, it is worth paying attention to the length of the hose except in special cases - for example, if the system is bought for a very spacious bathroom and you need a shower with an increased «radius of action».

— Double lever. Classic version with two separate swivel taps, one of which is responsible for hot water, the second - for cold. The advantages of twin-valve mixers are simplicity, reliability and accuracy of temperature setting. On the other hand, they are less easy to adjust than single-piece.

— Single lever (joystick). One lever capable of moving in two planes is responsible for all adjustments in such mixers. When moving in one plane (usually right-left) the temperature is adjusted in the other (up-down or from itself - on itself) - pressure. In addition, such a mixer allows you to «remember» a certain variant of temperature - it is enough to close the water without moving the lever in another plane. But tuning accuracy in such models may be lower than in two-valve.

— Thermostatic. Mixers equipped with a thermostat - a mechanism for maintaining a constant temperature of water at the outlet. This is the most advanced and convenient option, but expensive. It is enough for the user to choose the desired temperature (in degrees) and pressure, and the thermostat will automatically adjust the proportion of hot and cold water. There are models both classic with swivel regulators and thermostatic with button (read more about the button below).

— Buttoning on. Type of mixers con...trolled by pressing a button. This way a certain amount of water is supplied, which helps to save money.

— Single-valve. A variety found in hygiene kits (cf. «Type»). In fact, such a device is not a mixer, but simply a tap designed only to open and close the water. The idea behind this design is that only cold water is often used for hygienic showers, for which one valve is sufficient.