The number of separate slots for drives provided in the design of the pocket, in other words, the number of drives for which this model is designed.
In addition to models for
one slot, nowadays you can find more capacious solutions — for
two drives, or even
more. Such "multiplying" is found in three types of devices. The first is large-format pockets for stationary purposes (see above), operating in the format of separate storages for a large amount of data. Such models may support RAID arrays (see above) and other special features. The second type of devices with more than one slot are separate docking stations (see "Type") with similar functionality. The third type is server models (see "Purpose") with an internal installation; they again allow the organization of arrays, but by means of the server itself.
Note that external devices with one slot can be powered from the USB port, but several drives in this case inevitably require a separate PSU (see "Power").
The type of power provided in the design of the pocket.
This parameter is relevant only for external models (in internal solutions, power is determined solely by the connection interface). The options could be:
—
USB. Powered by the same USB port used for the main connection. The advantage of this option is obvious: it allows you to do without unnecessary wires and use the pocket regardless of the presence of sockets (which is important, for example, when working with a laptop on the road). At the same time, the power of USB power is generally low, and besides, it directly depends on the version of the connector (see "Connection"). So for pockets with several disks, this option is not suitable in principle. In other cases, you should pay attention to compatibility when connecting to a USB connector of an older version than is supported by the pocket. For example, a model with USB 3.2 gen1 can be physically connected to a USB 2.0 port without any problems, but it may not have enough power for normal operation. However, more modern versions (USB 3.2 gen1 and gen2) practically do not have such compatibility problems.
- Power Supply. Powered by a separate PSU, usually plugged into a power outlet. These pockets are bulkier and less mobile than USB-powered models, they can't work without power outlets nearby, and the extra wire is a bit of a hassle. On the other hand, the power supply is capable of delivering mor
...e power than USB, and this power is constant and does not depend on the version of the port to which the drive is connected. So many stationary models use just such a power supply; and for external pockets for two or more drives, this is generally the only available option.
