Dark mode
United Kingdom
Catalog   /   Home & Renovation   /   Autonomous Power Supply   /   Portable Power Stations

Comparison ANKER 521 PowerHouse vs EcoFlow RIVER 2

Add to comparison
ANKER 521 PowerHouse
EcoFlow RIVER 2
ANKER 521 PowerHouseEcoFlow RIVER 2
Compare prices 4Compare prices 12
TOP sellers
Main
2 USB A ports, 1 USB C port. Car cigarette lighter. LiFePo4 battery. Backlight.
2 USB A ports, 1 USB C port. Car cigarette lighter, XT60 port. Surges up to 600 W are allowed. LFP (LiFePO4) – lithium iron phosphate battery.
In boxcharging stationcharging station
Rated power200 W300 W
Peak power600 W
Output waveformsinusoid (PSW)sinusoid (PSW)
UPS function
Outputs
Sockets (230 V)11
USB A
2 pcs
5В/2.4А
12 W
2 pcs
5В/2.4А
12 W
USB type C
1 pcs
3 A
60 W
1 pcs
3 A
60 W
Car cigarette lighter
Inputs (station charging)
From solar panels
Via USB-C
Input port XT60
Add. portsC13/14 (charging)
Battery and charging time
Battery typeLiFePO4LiFePO4
Battery capacity256 W*h256 W*h
Charging cycles30003000
Charging time (socket) 236 min60 min
Charging time (solar panel) 180 min
Charging power (socket)65 W360 W
Charging power (solar panel)110 W
Charging power (cigarette lighter)100 W
General
Smartphone synchronizationBluetooth and WiFi
PSUexternalbuilt into the body
Display
Backlight
Carrying handle
Operating temperature0 °C ~ +40 °C0 °C ~ +45 °C
Dimensions216x212x144 mm142x245x214 mm
Weight3.7 kg3.5 kg
Warranty5 years
Added to E-Catalognovember 2022november 2022

Rated power

Power that a device can consistently produce for an indefinitely long time without any unpleasant consequences. For normal operation of the charging station, the rated power must be at least 15 - 20% higher than the total power of all devices simultaneously connected to it.

Peak power

Some electrical appliances (in particular, units with electric motors - refrigerators, air conditioners, etc.) consume significantly more energy at startup than after reaching the operating mode. For such a load, the peak power of the charging station must be taken into account - its indicator must be higher than the starting power of the load.

UPS function

Charging stations with UPS function switch consumers to backup power from their own battery, acting as an uninterruptible power supply. In comparison with full-fledged UPSs, switching does not occur instantly, but with a certain delay (about 10-30 ms). To use this function correctly, you must first study the instructions for the charging station, which often describes the correct procedure for connecting the intended consumer devices.

Input port XT60

Power connector with two round connectors, used to replenish energy reserves in the battery cells of the charging station. For the most part, the input port of the XT60 is for charging the device from solar panels using the appropriate cable.

Add. ports

Additional input connectors provided in the design of the charging station in addition to those described above.

Charging time (socket) ≈

Time to charge the portable power station from a fully discharged state to 100% charge when using the power adapter from a household outlet. This refers to the original battery and standard charger.

Charging time (solar panel) ≈

Time spent on a full charge when using the original panel in bright sunlight. In cloudy weather, the charging time of the device from the solar panel can be strikingly different downwards.

Charging power (socket)

The power at which, in normal mode, the portable power station is charged from a household outlet when using the original power supply.

Charging power (solar panel)

The power in watts provided when charging a device from a solar panel.

The higher the charging power, all other things being equal, the less time it will take to replenish the energy reserves in the cells of the device's own battery. This section provides the maximum power value that the charging station can accept. Accordingly, this indicator is supposed to be taken into account when choosing compatible solar panels.
ANKER 521 PowerHouse often compared
EcoFlow RIVER 2 often compared