Comparison Apple iPod touch 6gen 32Gb vs Apple iPod touch 5gen 32Gb iSight

The range of audio frequencies that the player is capable of reproducing. The wider this range — the more complete the picture of the sound, the less likely that the device will "cut off" part of the sound spectrum. At the same time, when choosing this parameter, several points should be taken into account.

First, the average human ear is capable of hearing sounds from approximately 16 Hz to 20 kHz; deviations from these figures are small, and with age the range narrows even more. In fact, this means that for normal hearing, it is enough just to cover this gap. And the wider boundaries indicated in the characteristics of the player will be more of a marketing ploy than a really significant moment. Secondly, do not forget that the sound quality is determined not only by the range, but also by a number of other characteristics of the player — signal-to-noise ratio, frequency response, etc.; therefore, a wide range by itself does not guarantee a pleasing sound. And thirdly, the features of the audible sound also largely depend on the headphones used and their frequency range: all the advantages of a player with a wide frequency range can come to naught if the frequencies are “cut off” by the headphones.

Audio file formats that the player is able to work with.

— MP3. The most famous of modern digital audio formats; supported by almost all compact players, the name MP3 has even become a household name for them. Provides so-called. lossy compression, where some of the audio frequencies are lost. However, during compression, the sound is processed in such a way that it "disappears" mainly frequencies, the loss of which is imperceptible to the human ear. As a result, the sound quality can be quite high, and you can clearly distinguish high-quality MP3 from lossless format only on Hi-Fi equipment.

— WAV. Another popular audio standard, originally developed for storing sound on a PC. It can technically be used to store audio in a variety of formats, but is most commonly used for uncompressed audio. Due to this, the sound quality can be quite high, and its processing does not require special computing power. The downside of this is the large volume of audio files — many times more than MP3s.

— WMA. An audio format, at one time specially created for the Windows operating system. By default, it uses lossy compression (although there is also a lossless version of the WMA codec). WMA is particularly suitable for low bitrates, under such conditions it provides better quality than MP3 and takes up less space. On the other hand, this format is much less popular in high-quality digital audio.

...— AAC. A format developed as a potential successor to MP3. Also provides lossy compression (see above), but allows you to achieve better quality with the same file size; this difference is especially noticeable at low bitrates. Actively promoted by Apple in iPod players; nevertheless, it is noticeably inferior to MP3 in terms of prevalence, although it is supported by a considerable number of players.

— OGG. A lossy compressed digital audio format is one potential alternative to MP3. One of the key features of OGG is that as audio is encoded, the bitrate is constantly changing; at the same time, on fragments where there is no sound, the bitrate drops to almost zero (unlike MP3, where the data stream is constant, including in sections of complete silence). This makes it possible to achieve small file sizes while maintaining sound quality. Also note that the OGG format is open and not limited by patents.

— FLAC. One of the formats that uses lossless audio compression. With this compression, all the details of the original sound are preserved, so lossless formats are especially appreciated by sophisticated music lovers and audiophiles. The reverse side of this quality is large volumes of files. Specifically, FLAC is perhaps the most common of today's lossless formats. This is largely due to the fact that this standard is not particularly demanding on the processing power of the player. Thanks to this, its support can be implemented even in relatively simple and inexpensive players (unlike another popular format — APE, see below). On the other hand, FLAC files are larger than APE files.

— A.P.E. One of the popular lossless audio compression formats. Compared to another common standard — FLAC (see above) — APE allows you to achieve smaller file sizes with the same quality. On the other hand, to play such files, electronics with a fairly high processing power are required, so APE compatibility is relatively rare in compact players.

— DSD. A specific digital audio format using the so-called. sigma-delta modulation (as opposed to pulse code used in most other formats). Such modulation provides a very high sampling rate — 2822.4 kHz; however, it cannot be compared with the usual sampling rate (see above): in this case we are talking about a specific signal format. Its properties are such that DSD support can be provided even if the player's DAC formally has a much lower sampling rate. In general, this format is considered professional, its support is found mainly in Hi-Fi models (see "Type").

— DXD. Professional audio format originally created for editing DSD files (see above) — For technical reasons, original DSD is not well suited for editing. DXD uses a bit depth of 24 bits (8 bits higher than Audio CD format) and a sampling rate of 352.8 kHz (8 times higher than Audio CD). Like the original DSD, it is found mainly in Hi-Fi players.

— AIFF. Audio format developed by Apple for Macs and Macbooks; a kind of "apple" analogue of the WAV described above, also in most cases used for uncompressed audio.

— Audible. Proprietary file format used by the online audiobook store of the same name. One of the features of this format is that file playback is available only if you enter a login and password for the Audible online store; thus, supporting this standard usually means having a client programme to access the store.

This list is not exhaustive, modern players (especially the top category) may support other types of audio files.

Non-audio file formats that the player can handle.

— AVI. One of the most popular video file formats nowadays, it is used both in portable devices and in stationary video equipment. Technically, it is a container, that is, it can contain data processed by different codecs; playback requires that the device supports not only the AVI format, but also the corresponding codec.

— MP4. Video files using the MPEG-4 container. MP4 was once one of the most popular formats for portable players, and it is this format that is usually meant when people talk about "converted video" for a media player or smartphone.

— MPEG-4. Another name for the above MP4.

— MKV. A video container created as an open source alternative to the above described AVI and similar standards. Very handy when creating video files with multiple embedded video, audio and/or subtitle streams, which is why it is widely used and continues to evolve.

— MOV. Video file (container) format originally developed by Apple for QuickTime software players

— ASF. Microsoft's proprietary format, specifically designed to work with streaming content.

— SWF. A format in which animation clips are recorded based on flash technology.

— jpegs. One of the most popular modern image file formats, it is the standard for digital photography. Note that graphics support, including JPEG, can be pro...vided even in players with very miniature screens — to display album art.

— PNG. Popular graphic file format. In particular, it is widespread on the Internet due to the ability to achieve good quality with small file sizes.

— GIF. Another popular graphic file format. Notable for the ability to create animated pictures.

— BMP. One of the most common graphic formats. However, due to the rather large volumes of files, it is less common than the above standards.

— txt. Text-only files, no formatting (except paragraphs). Support for this format can be provided even in players with very small screens — to view lyrics.

This list is not exhaustive, other file formats may be supported in modern compact players.

The player supports Bluetooth technology.

This technology was developed for direct wireless communication between various devices. The ways in which it can be used can vary; in the case of players, the most common option, which is almost mandatory for any model with Bluetooth, is to broadcast sound to wireless headphones, speakers or other similar devices (aptX is highly desirable, see “Functions/capabilities”). In addition, other methods of using Bluetooth may be envisaged - in particular, exchanging files with other devices and remote control (player or from the player); the specific set of additional functions should be specified separately. And Bluetooth versions (the latest of which at the end of summer 2021 is Bluetooth 5.0) indicate the advancedness of the device and its increased capabilities.

Characteristics of the display installed in the player.

— Color(color/monochrome). The display color is selected by the manufacturer taking into account the functionality of the player. So, for a device that supports video and graphic materials (see “Other formats”), a color display is mandatory, and if the player only works with audio, a monochrome (one-color) screen is quite sufficient for it, especially since such screens are cheaper and consume less energy.

- Size. The diagonal dimensions of the display is directly related to the type of device (see above). Thus, classic audio players do not require large screens, in most of them this figure does not exceed 1.5"; but for a media player, 1.5" is, in fact, the absolute minimum, usually the diagonal is 3" or more. Also large Hi-Fi players are equipped with screens, they also provide a similar feature for the convenience of working with special tools.In general, a large screen, on the one hand, is convenient to use, on the other hand, it affects the dimensions and price of the device.

— Display resolution. Display dimensions in pixels vertically and horizontally. With the same diagonal, a higher resolution provides a clearer and more detailed image, but increases the cost of the player. In addition, not every player needs high detail: if the screen is used only for service information like the title of a so...ng, you can get by with small resolutions. Therefore, you should pay attention to this parameter only when it comes to a media player (see “Type”) on which you plan to often watch videos. In other cases, we can assume that the screen resolution is guaranteed to be sufficient for the tasks for which the device is intended.

— Sensor type. The type of matrix used in the screen.

• OLED. An OLED matrix in which each pixel is actually a separate LED. In portable players, most of these screens are monochrome; for color displays it is more convenient to use other technologies.
• TFT. General name for liquid crystal displays. In this case, the TFT designation is used mainly for relatively simple screens that do not use advanced technologies like the IPS described below and have rather limited characteristics. However, such screens can be made in color and have high resolution.
• AMOLED. A development of the OLED technology described above, designed to create high-quality color displays. AMOLED screens are characterized by high brightness, rich colors and good viewing angles. Among their disadvantages, we can note a slightly shorter service life than the same IPS, as well as a tendency to fade in areas where bright parts of the image are often displayed.
• IPS. One of the most popular color screen technologies used in modern portable technology. Provides good color rendering quality and wide viewing angles; The picture quality is somewhat inferior to AMOLED, but is cheaper and lasts longer.

- Touch screen. The touch screen is similar to tech used in modern smartphones. On-screen controls are often more convenient and versatile than using buttons and other hardware controls. For normal use, such a display must be quite large. We also note that a touch screen is mandatory for models with a full OS (see above).