Comparison Chicco Urban Plus Crossover vs Chicco Trio Activ3 3 in 1

General design of the pushchair.

In addition to traditional varieties — classic models (with a carrycot) and pushchairs (with a seat) — nowadays you can also find universal pushchairs, which are 2 in 1 and 3 in 1, transformers and pushchairs for sports purposes. Here is a more detailed description of each variety:

— Pushchairs. Pushchairs designed for the sitting position of the kid. The seat for the baby in such pushchairs is called a seat unit; in fact, it is a seat of a special design. In some models, this seat can tilt almost horizontally, which gives the little passenger the opportunity to take a nap. Nevertheless, all pushchairs are intended for more or less grown-up kids who are able to sit up independently — that is, not younger than 6 — 8 months.
Also note that in this category there are the possibility of installing a carrycot. In fact, such models are universal (see below); but if the carrycot is not initially included in the delivery, it is customary to classify the pushchair as a pushchair.

— Jogging. A type of pushchairs (see above) designed for parents who value an active lifestyle: a jogging pushchair can be used not only when walking quietly, but also when jogging. Such pushchairs are usu...ally equipped with three wheels of rather large diameter, and also have a large width of the chassis (see below); all this gives additional stability and passability, including on uneven roads. In addition, the design may include specific features for added comfort and safety, such as a strap that fixes the parent's hand on the pushchair handle or an additional brake that activates when the pushchair is released from the hands.

— Universal. Pushchairs often come with at least two (or even three) interchangeable units: a lying carrycot for infants, a seat unit for older babies, and sometimes a Group 0+ car seat. Parents can choose which unit to use on the chassis. This option provides convenience throughout the baby's pushchair years, starting with the carrycot for the first 6-8 months and transitioning to the seat unit. However, these universal pushchairs are pricier and less space-efficient than transformers with similar capabilities. On the flip side, separate carrycots and seat units are more convenient and reliable.
It is worth taking into account that some universal models can be supplied in alternative options — for example, " carrycot + car seat". So, when buying such a pushchair, it does not hurt to specify the set of accessories supplied with it.

— Pushchair-transformer. Transforming pushchairs allow the seat to convert seamlessly from a carrycot to a seat unit and vice versa, offering the same versatility as universal models. Unlike universal pushchairs, transformers don't require rearranging the main unit for this reconfiguration, providing several advantages. Firstly, the main block's format can be changed anytime, even on the go, without the need for separate seat units or carrycots. Secondly, the integrated carrycot takes up less storage space compared to two separate units.

— Classic. Pushchairs that are equipped with carrycots only; some also allow the installation of a seat unit, as in universal models, but if such a unit is not included in the kit, the pushchair is considered a classic. Recall that carrycots are intended mainly for children under 6 – 8 months old, who are not yet able to sit normally in the seat unit; in other words, this type of pushchair is suitable mainly for the smallest kids. That is why the "classic" nowadays is not particularly popular.

The ability to adjust the tilt of the main unit relative to the stroller frame. This allows you to adjust the stroller to different situations: for example, at the beginning of the walk, the unit can be installed almost vertically, based on a sitting position, and later tilted back so that the baby can take a nap.

The ability to adjust the position of the footrest, on which the legs of the baby in the pushchair rest.

A similar ability is found in some pushchairs, transformers and pushchairs of universal pushchairs (see "Design"). The footrest itself is an inclined surface attached to the front edge of the seat. Adjustable footrests are those in which the angle of inclination can be adjusted; in many models, this footrest can even be set horizontally. This makes it possible to choose the most comfortable position for the baby's legs in different situations.

In strollers with this function, the seat unit can be fixed in one of two positions, to choose from: facing the parent (against the direction of movement) or facing away from the parent (in the direction of movement). Each option has its advantages: in the first case, the baby can see a familiar face and is less nervous, and when located in the direction of movement, it is more convenient for him/her to view the world around him/her.

A window made of transparent or translucent material, built into the hood that covers the cradle or seating unit. In the version with a walking block, the viewing window is usually located so that the parent can see the baby directly while moving, without being distracted from controlling the stroller. In cradles, the parent can see the child through a window by approaching the stroller from the side of the hood (that is, on the opposite side of the handle); implementations with a window in the front hemisphere of the hood are less common. In addition, a baby lying in a cradle can usually see the outside world through the window (primarily the sky above the stroller). The viewing window can be made in the form of oilcloth or a mesh mosquito net, through the holes of which air freely penetrates, but insects and small debris raised by the wind are retained.

The number of points of support provided in the pushchair — in other words, the number of individual wheels (single or twin) on which it rests. These pushchairs are currently in production:

— 3-wheel. These models usually have one wheel in the front and two wheels in the back. One of the advantages of this design is that even on an uneven surface, all wheels will have contact with the support, none of them will sag, and the pushchair will stand stable without wobbling. In addition, 3-wheel models are lighter and cheaper than similar 4-wheel models. At the same time, they are worse to resist tipping on the side, and in general a little less reliable and durable. Therefore, such pushchairs are produced relatively few.

— 4-wheel. Traditional 4 wheels — two in front, two in the back. This design is more practical, reliable and resistant to tipping over than a 3-wheel one, which is why it is used in most modern pushchairs. However it is somewhat more expensive and heavier, but these points are generally outweighed by the benefits.

— 6-wheel. A variant found among pushchairs for twins, in which the seats are installed side by side. The traditional 4 wheels in such models are supplemented by two more wheels that are placed between the seats; these wheels provide additional support, preventing the structure from saggin...g under the weight of the kids.

— 5-wheel. A very uncommon and specific variant, also found among pushchairs for twins. In fact, such models are a simplified version of the six-wheel ones described above: in the front of such a pushchair there are three wheels (on the edges and in the middle), and only two wheels in the back (on the edges). This reduces weight and cost a bit, but it also reduces reliability, which is why 5-wheel models have not become widespread.

The ability to install a carrycot on the pushchair — a characteristic basket in which the baby can lie comfortably.

Carrycots are used mainly for very young kids (up to 6 – 8 months), who can not yet sit normally in seat units. And the possibility of installing such an accessory by definition is available in all universal pushchairs (see "Design"). Also, the replacement of the seat unit on the carrycot can be provided in pushchair models. In fact, such pushchairs are also universal – but they are not initially equipped with carrycots, and therefore belong to the category of pushchairs.

— Classic. U-shaped handle (or similar), which is a kind of frame. It is slightly less comfortable to hold with two hands than a double handle, but can be comfortably held with one hand.

— Double. A pair of separate handles without a bridge between them. The handles themselves are usually curved so that the parent's hands resting on them are in the best, most comfortable position. At the same time, double handles should preferably be held with two hands; it is much more difficult to handle them with one hand than with a classic handle. In addition, it should be noted that this option is considered the most suitable for pushchairs (see "Design"), while for pushchairs with a carrycot it is not very suitable.

— Universal. A design that is a combination of the classic and double handle described above. This allows the parent to choose the option depending on the situation: for example, it is more convenient to hold the stroller with two hands by the "horns", and if one hand needs to be free - you can take the single (classic) handle. At the same time, such a choice is not really necessary for everyone, and universal handles are more complicated and expensive than specialized ones, so they are much less common.

— Round. The handlebar can have a different design: in some models it is an oval loop mounted on a long...bar, in others it is a kind of "steering wheel" on a frame above the hood. Whatever the case, in some models such a handle is a round: it is directly connected to the front wheels, and when you turn the handle, the wheels turn to one side or the other. This noticeably improves maneuverability, but complicates the design and increases its price. However, there are also simpler designs, where the round handlebar differs from the classic handles only in shape. All these nuances should be specified for each model separately.

Possibility to adjust the stroller handle in height. This function allows you to optimally adjust the length of the handle to the height of the parent. It will be especially useful if the parents are of different heights, and each of them regularly carries a stroller.

Typically, height adjustment is carried out by lowering or raising the upper segment of the handle, and in advanced implementations a telescopic mechanism is responsible for it. The retractable handle makes the stroller more adaptable to different situations and conditions. For example, it can be lengthened for more comfortable walking or shortened for ease of use in tight spaces.