Comparison Gamemax Forge AB black vs Gamemax Forge MB black

The form factor determines, first of all, the internal volume of the case (as a result, the motherboard used for it, see "Type of motherboard"), as well as installation features. To date, PC cases are available in the following main form factors:

— Full Tower. The tower case is one of the largest form factors for PCs today: 15-20 cm wide, 50-60 cm high, with up to 10 externally accessible bays. Most often in this form factor running advanced high performance PCs.

— Ultra Tower. Further development and expansion of Full Tower cases (see above), offering even more space for hardware: the width of such a case is about 25 cm, the height can reach 70 cm, which allows you to install powerful configurations inside and provides enough free space for effective cooling .

— Midi Tower. A representative of the tower family (tower cases) of medium size — about 45 cm in height with a width of 15-20 cm, with the number of external bays from 2 to 4. Most popular for middle-class home PCs.

— Mini Tower. The most compact "vertical" case type, with a width of 15-20 cm, has a height of about 35 cm and (usually) less than 2 compartments with external access. It is mainly used for assembling office PCs that do not require high performance.

— Desktop. Enclosures designed for i...nstallation directly on the desktop. They often have the possibility of horizontal installation — in such a way that a monitor can be placed on top of the case — although there are also models that are installed strictly vertically. The size of such cases can be almost anything — from miniature solutions for thin mini ITX motherboards to large-sized cases for E-ATX (see "Motherboard type"). However, most "desktops" are relatively small.

— Cube Case. Cases having a cubic or close to it shape. They can have different sizes and are intended for different types of motherboards, this point in each case should be clarified separately. Anyway, such cases have a rather original appearance, different from traditional "towers" and "desktops".

— Dual Tower. Quite a rare option — cases, in size and proportions resembling two "towers", made up side by side. Dual Tower solutions are large in size and are intended mainly for powerful high-performance PCs (in particular, top gaming stations).

Note that there are models that allow both vertical and horizontal installation and can, in fact, turn from a "tower" to a "desktop" and vice versa. For such cases, the form factor is indicated by the form factor named in the manufacturer's documentation, or by the main installation method described there.

The type of motherboard for which the design is designed. This parameter is indicated by the form factor of the "motherboard", under which the case is designed. The options might be:

— ATX. One of the most common types of motherboards today, the standard ATX size is 30.5x24.4 cm. It is used in both home and middle-class office PCs.

— XL-ATX. The general name for several standards of motherboards, united, as the name implies, by rather large sizes and corresponding equipment. Specific values for these dimensions can vary from 324 to 345 mm long and 244 to 264 mm wide, depending on the manufacturer and model. Accordingly, when choosing such a case, it is worthwhile to separately clarify its compatibility with a specific motherboard.

— E-ATX(Extended ATX). The largest type of motherboards, under which modern cases are made, has dimensions of 30.5x33 cm. It is usually used in high-performance systems that require numerous expansion slots.

— micro-ATX (m-ATX). The compact version of the ATX board has dimensions of 24.4x24.4 cm. The main scope of such boards is office systems that do not require high performance.

— mini-ITX. One of the further reductions in the form factor of motherboards after m-ATX assumes a board size of about 17x17 cm and one (most often) e...xpansion slot. Also designed for compact systems that do not differ in performance.

— Thin mini-ITX. A modification of the mini-ITX described above, designed to reduce the thickness of the case (up to 25 mm), and the RAM sticks do not protrude upwards and lie on the "motherboard" parallel to the board itself (for more details, see "Form factor"). Like most compact designs, thin mini-ITX boards do not have high processing power.

Note that most cases allow the installation of smaller motherboards — for example, many E-ATX cases can be used with ATX motherboards. However, specific compatibility anyway should be clarified separately.

The number of slots for expansion cards located on the rear panel of the case.

The expansion card itself (graphics card, sound card, TV tuner, etc.) is installed in a slot on the motherboard, and an external panel of such a card with inputs and outputs is attached to the hole on the back of the case. The more holes are provided in the case, the more expansion cards can be installed in it. Note that some boards can occupy two or even three holes at once; this is especially common in powerful video cards. On the other hand, you have to pay attention to the number of holes mainly if you are building a powerful high-performance system. For an ordinary household PC, in most cases, one opening is enough for a graphics card; and in many configurations, the openings on the rear panel are not used at all.

The more fans are included in the design, all else being equal — the more intense the cooling will be and the more powerful (and, consequently, "hotter") components can be placed in the case without the risk of overheating. For everyday tasks, a case with one, two, three, or four factory fans is quite sufficient. At the same time, when comparing, it is worth considering not only the number but also the operating characteristics of the fans (diameter, speed). It should also be noted that cases are available for purchase without fans but with open slots for fans, allowing you to supplement the cooling system and improve its performance if necessary.

— Front Cover. A flap cover that entirely or partially conceals the front panel. It gives the computer a neat appearance by hiding ports and external slots under a uniform surface and serves as childproof protection.

— Panel Display. A display on the front or side panel of the case used to show various service information: current CPU frequency, system temperature data, cooling mode, etc. Various important data can be displayed independently of what happens in the software part of the computer.

— Graphics Card Holder. A structural solution for supporting the graphics card inside the case. Specialized stands or holders prevent the graphics adapter from sagging over time and reduce the strain on the PCI-E slot of the motherboard. The fact is, many modern graphics card models have significantly increased in weight — holders are designed to compensate for their heaviness. Stands are available as built-in solutions or standalone accessories that can be installed inside the case independently.

— Side Panel Lock. A special lock on the removable side panel of the case. Such a lock prevents unauthorized access to the internal space of the system unit.

— Noise Insulation. The presence of additional noise insulation in the case. This can be a special coating on the interior sid...e or other, more specific solutions (e.g., damping systems on "mounting spots" for individual components, reducing the level of vibrations transmitted to the case). In any case, this feature helps reduce the noise level emitted by the system — sometimes quite significantly.

— Removable HDD Cage. The presence of a removable cage under the internal peripherals of 3.5" form factor (in most cases these are hard drives, hence the name) in the case design. This cage facilitates assembly because removing and installing a hard drive is much easier than securing it in a non-removable slot inside the case; this aspect is particularly useful if the system plans to install multiple hard drives.

— HDD Docking Station. Built-in docking station for quick connection of internal hard drives. In fact, this feature allows connecting an internal HDD as an external one: the docking station port is located outside the case and equipped with quick-connect fasteners for convenient connection.

— Hidden Cable Routing. The ability to route cables from the power supply on the reverse side of the motherboard (considering the main side where the processor and expansion card slots are located). Thus, the main "mobo" side is freed from cables, positively affecting cooling efficiency.

— Cooling System Installation Window (CS) for the processor. The presence of a separate window in the case opposite the CS mounts for the processor. The fastening system is located on the reverse side of the motherboard, and usually, replacing it requires removing the entire "mainboard"; the CS installation window frees the user from this necessity and significantly simplifies the installation and replacement of CS.