United Kingdom
Catalog   /   Computing   /   Components   /   RAM

Comparison Team Group T-Force Delta RGB 2x8Gb TF3D416G2400HC15BDC01 vs G.Skill Trident Z RGB DDR4 2x8Gb F4-2400C15D-16GTZR

Add to comparison
Team Group T-Force Delta RGB 2x8Gb TF3D416G2400HC15BDC01
G.Skill Trident Z RGB DDR4 2x8Gb F4-2400C15D-16GTZR
Team Group T-Force Delta RGB 2x8Gb TF3D416G2400HC15BDC01G.Skill Trident Z RGB DDR4 2x8Gb F4-2400C15D-16GTZR
from £44.20 
Outdated Product
from £87.24 
Outdated Product
TOP sellers
Main
Metal radiators. Potential for manual overclocking. Synchronization of RGB lighting with applications from motherboard manufacturers.
The memory is equipped with a customizable RGB backlight.
Memory capacity16 GB16 GB
Memory modules22
Form factorDIMMDIMM
TypeDDR4DDR4
Memory ranksingle ranksingle rank
Specs
Memory speed2400 MHz2400 MHz
Clock speed19200 MB/s19200 MB/s
CAS latencyCL15CL15
Memory timing15-17-17-3515-15-15-35
Voltage1.2 V1.2 V
Coolingradiatorradiator
Module profilestandardstandard
Module height44 mm
More features
overclocking series
XMP
overclocking series
XMP
Lightingmulti compatibilitymulti compatibility
Color
Added to E-Catalogseptember 2017july 2017

Memory timing

Timing is a term that refers to the time it takes to complete an operation. To understand the timing scheme, you need to know that structurally RAM consists of banks (from 2 to 8 per module), each of which, in turn, has rows and columns, like a table; when accessing memory, the bank is selected first, then the row, then the column. The timing scheme shows the time during which the four main operations are performed when working with RAM, and is usually written in four digits in the format CL-Trcd-Trp-Tras, where

CL is the minimum delay between receiving a command to read data and the start of their transfer;

Trcd — the minimum time between the selection of a row and the selection of a column in it;

Trp is the minimum time to close a row, that is, the delay between the signal and the actual closing. Only one bank line can be opened at a time; Before opening the next line, you must close the previous one.

Tras — the minimum time the row is active, in other words, the shortest time after which the row can be commanded to close after it has been opened.

Time in the timing scheme is measured in cycles, so the actual memory performance depends not only on the timing scheme, but also on the clock frequency. For example, 1600 MHz 8-8-8-24 memory will run at the same speed as 800 MHz 4-4-4-12 memory—in either case timings, if expressed in nanoseconds, will be 5-5-5-15.
G.Skill Trident Z RGB DDR4 2x8Gb often compared