Comparison Canon PowerShot G7X Mark II vs Canon PowerShot G5X

— CCD (CCD). Abbreviation for Charge-Coupled Device. In such sensors, information is read from the photosensitive element according to the “line at a time” principle — an electronic signal is output to the image processor in the form of separate lines (there is also a “frame at a time” variant). In general, such matrices have good characteristics, but they are more expensive than CMOS. In addition, they are poorly suited for some specific conditions — for example, shooting with point light sources in the frame — which is why you have to use various additional technologies in the camera, which also affect the cost.

— CMOS (CMOS). The main advantages of CMOS matrices are ease of manufacture, low cost and power consumption, more compact dimensions than those of CCDs, and the ability to transfer a number of functions (focus, exposure metering, etc.) directly to the sensor, thus reducing the dimensions of the camera. In addition, the camera processor can read the entire image from such a matrix at once (rather than line by line, as in CCD); this avoids distortion when shooting fast-moving objects. The main disadvantage of CMOS is the increased possibility of noise, especially at high ISO values.

— CMOS (CMOS) BSI. BSI is an abbreviation for the English phrase "Backside Illumination". This is the name of "inverted" CMOS sensors, the light on which does not penetrate from the side of the photodiodes, but from the back of the matrix (from the side of the subst...rate). With this implementation, the photodiodes receive more light, since it is not blocked by other elements of the image sensor. As a result, back-illuminated sensors boast high light sensitivity, which allows you to create images of better quality with less noise when shooting in low light conditions. BSI CMOS sensors require less light to properly expose a photo. In production, back-illuminated sensors are more expensive than traditional CMOS sensors.

— LiveMOS. A variety of matrices made using the technology of metal oxide semiconductors (MOS, MOS — Metal-Oxide Semiconductor). Compared to CMOS sensors, it has a simplified design, which provides less tendency to overheat and, as a result, a lower noise level. It is well suited for the "live" viewing mode (viewing in real time) of the image from the matrix on the screen or in the camera's viewfinder, which is why it received the word "Live" in the title. They also feature high data transfer rates.

Bracketing is called shooting a series of frames, in which in each next frame the shooting parameters (exposure, white balance, focus, etc.) change by a certain amount. This allows, for example, to choose the most successful shot from several options, or to determine the effect of changing the settings in one direction or another. Auto bracketing allows you to take such shots automatically. At the same time, it should be taken into account that the set of parameters changed in the process may differ in different camera models. For example, some devices are able to change only the exposure, others — the exposure and/or white balance, etc.

The number and / or types of scene programs for shooting videos provided in the design of the camera.

Scene programs are a set of presets designed for different shooting situations - for example, in sunlight, on a cloudy day, in a darkened room, etc. Also, this list may include other specific modes - for example, creative tools. In any case, the presence of scene programs facilitates the choice of video shooting parameters, which is very useful for novice users.

— USB C. A universal USB interface that uses a Type C connector. USB ports themselves (all types) are used mainly for connecting the camera to a computer for copying footage, managing settings, updating firmware, etc. Specifically The Type C connector is comparable in size to earlier miniUSB and microUSB, but has a reversible design that allows the plug to be inserted in either direction. In addition, USB C often operates according to the USB 3.1 standard, which allows for connection speeds of up to 10 Gbps - a useful feature when copying large amounts of content.

- HDMI. A comprehensive digital interface that allows you to transmit video (including high resolution) and audio (up to multi-channel) over a single cable. The presence of such a port makes it possible to use the camera as a player: it can be directly connected to a TV, monitor, projector, etc. and view your footage on the big screen. In this case, broadcast capabilities can include not only video playback, but also demonstration of captured photos in slide show mode. HDMI inputs are present in most modern video equipment, and connection is usually not a problem.
Nowadays, there are several versions of the HDMI interface on the market:

• v 1.4. The oldest version currently relevant, released in 2009. However, it supports 3D video, is capable of working with resolutions up to 4096x2160 at a speed of 24 fps, and in Full HD resolution the frame rate can reach 120...fps. In addition to the original v.1.4, there are also improved modifications - v.1.4a and v.1.4b; they are similar in basic capabilities, in both cases the improvements affected mainly work with 3D content.
• v2.0. Significant HDMI update introduced in 2013. In this version, the maximum frame rate in 4K has increased to 60 fps, and support for ultra-wide 21:9 format can also be mentioned. In update v.2.0a, HDR support was added to the interface capabilities; in v.2.0b this function was improved and expanded.
• v 2.1. Despite the similarity in name to v.2.0, this version, released in 2017, was a very large-scale update. In particular, it added support for 8K and even 10 K at speeds up to 120 fps, and also further expanded the capabilities for working with HDR. This version was released with its own cable - HDMI Ultra High Speed; all features of v.2.1 are available only when using cables of this standard, although basic functions can be used with simpler cords.

— Headphone output. Audio output allows you to connect headphones to the camera. As a rule, it is represented by a classic 3.5 mm mini-jack. The presence of such a connector provides the ability to monitor sound during video recording in real time. This is especially important when filming interviews, vlogs and other similar projects.

— Microphone input. Specialized input for connecting an external microphone to the camera. External microphones are significantly superior to built-in microphones in sound quality. Firstly, they are not so sensitive to the camera’s “own” sounds - from buttons, control wheels, focus motors, etc. (and if the microphone uses a long wire and is not attached to the body, these sounds will not be heard at all). Secondly, external microphones themselves have more advanced characteristics. On the other hand, their use is justified mainly for professional video recording; therefore, the presence of a microphone input, as a rule, corresponds to advanced video recording capabilities

Autofocus operating modes provided in the camera design.

— One picture. The main mode of autofocus operation is found in all modern cameras and is used most often. Designed for shooting motionless objects.

— Follower. This mode is used for shooting moving objects, the distance to which is constantly changing: the camera constantly monitors the position of the object, constantly adjusting the optics so that it is in focus. Usually found in middle and upper class cells.

— AI focus. A peculiar combination of the previous two modes is used when a stationary object can start moving at any moment. If the scene is static, autofocus works in the single frame mode, but if the object on which focus is made starts to move, the device switches to tracking autofocus mode. AI mode allows you to almost instantly set the optimal autofocus settings, which is especially useful for sequential shooting. Initially, it was found in expensive models, however, thanks to the development of technology, today it can even be used in inexpensive compacts (see “Camera type”).

— By the face. Autofocus mode that uses a face recognition system and focuses on them. This feature is especially useful for taking pictures of people at a great distance from the camera, when the face is much smaller than the frame size, such as in group shots.

— With a smile. A further development of the face autofocus mode described above, when, in accordance with the nam...e, the system reacts not just to a face, but to a smile. This mode can be combined with the function of automatic shooting at the moment of a smile.

— Animal in the frame. A mode designed primarily for shooting animals, which can be difficult (and often impossible) to make them sit still in the frame. It is usually a variation of the tracking autofocus described above, but specific features of operation may vary depending on the camera model.

This list is not exhaustive, and other specific autofocus modes may be provided in the design of modern cameras.

The number of focus points (autofocus) provided in the design of the camera.

The focus point is the point (more precisely, a small area) in the frame from which the autofocus system reads data for focusing. The simplest systems work with a single point, but their capabilities are very limited, and this option is practically not found today. Modern digital cameras have at least three focus sensors, and in the most advanced models this figure can reach several dozen.

The more autofocus sensors there are in the camera, the more advanced its autofocus capabilities will be, the more specific techniques it allows you to use. In this case, the selection of specific points used can be carried out both automatically, simultaneously with the choice of the subject program, and manually (however, the second option is more typical for professional cameras). In addition, the abundance of focus points has a positive effect on the quality of the tracking autofocus (see "Autofocus Modes").

In general, more focus sensors are generally considered a sign of a more advanced camera; however, differences in quality become really noticeable only if the difference in the number of points is significant - for example, if we compare models with 9 and 39 points. A lot also depends on the location of the points in the frame - it is believed that sensors distributed over a wide area work better than densely located in the center of the frame, even if their number is the same.

The presence of the function of strengthening the contours in the design of the camera.

This feature applies to manual focus and is only available with electronic or optoelectronic viewfinders, and in Live View mode (see below). It consists in highlighting the contours of those objects that are currently in focus with colour. Thanks to this, the photographer can easily determine the location and boundaries of the area in focus, which greatly simplifies manual focus.

The type of viewfinder provided in the design of the camera.

A viewfinder is an eyepiece in which the photographer is able to see the image being shot, and in some cases additional information (the location of autofocus sensors, individual shooting parameters, etc.). Regardless of the type, viewfinders are useful in that they allow you to clearly see the image you are shooting, even in bright ambient light (which can cause displays to “blind”). Their disadvantages are the need to bring the camera close to the face, as well as the inconvenience when working with glasses (although the latter is partly offset by diopter correction in the viewfinder itself). The types of viewfinders can be as follows:

— Electronic. Such a viewfinder is a system of lenses with a small screen behind them. It is widely used in advanced cameras with non-replaceable lenses (see "Camera Type"), can be used in MILC cameras, and relatively recently full-fledged " SLRs " have appeared (in particular, made according to the so-called "translucent mirror technology") equipped with electronic viewfinders. The advantage of such a viewfinder is that, in addition to the image itself, it can display a large amount of service information (for example, about shooting parameters); the main disadvantage is the need to supply power from the battery (although the power consumption of such a system is still much lower than that of an...external display).

— Optical. In this case, an optical viewfinder means an independent system with its own eyepiece and lens, built into the camera body and directed parallel to the optical axis of the lens (mirror and prism systems are separated into separate categories). Such a system can be located both directly above the lens and in the corner of the body. The advantages of optical viewfinders are simplicity, low cost and compactness, due to the absence of a complex system of mirrors or prisms in the design. Such a viewfinder can be used in any non-reflex cameras (classic digital or MILC). The main disadvantage of this option is the mismatch between the position of its lens and the main lens of the camera (the so-called parallax effect); in most cases, this does not create inconvenience, but when shooting at close distances, you have to take an amendment (although there are camera models with viewfinders that automatically correct).

— Optical and electronic. A specific type of viewfinder that combines elements of both systems described above. Usually, such structures are based on an optical viewfinder, which provides for the possibility of projecting various service information onto a visible image. And in some models, the system can also be switched to a fully electronic mode, blocking the access of light through the optics and observing only the picture on the screen through the viewfinder.

— Optical (mirror). As the name implies, the design of such a viewfinder is based on a system of mirrors. Through this system, the real image perceived by the camera lens is fed into the viewfinder eyepiece (in other words, the photographer is actually looking directly through the lens). SLR viewfinders are used exclusively in cameras of the corresponding type (see above). Their advantages are the absence of the parallax effect and the ability to immediately evaluate a number of shooting parameters, such as depth of field, the effect of installed light filters, etc. The main disadvantage of reflex viewfinders is the need to raise the mirror at the time of shooting. This complicates and increases the cost of the design, makes it less reliable, and the operation of the mirror lifting mechanism can cause vibrations and the “stirring” effect.

— Optical (pentaprism). In fact, it is a kind of mirror viewfinder (see above), in which the role of a part of the mirrors is assigned to a pentaprism — a glass structure of a special shape. The action of the pentaprism is based on the effect of the so-called total internal reflection; it is believed that in this way it is possible to achieve a brighter and clearer image than when using classic mirrors. Other advantages and disadvantages are identical to conventional reflex viewfinders (see above). The pentaprism is widely used in mirror devices.

— Is absent. The complete absence of a viewfinder in the design of the camera; For sighting in such models, a display is used. This feature is typical mainly for digital compacts (see "Type of camera"). Firstly, the dimensions of the body of such models often do not allow for a viewfinder to be included in the design; secondly, the specifics of the use of such cameras is usually such that the display is quite enough for them, and sometimes it is even more preferable — for example, when shooting from a non-standard position (above your head, with your arm outstretched in front of you, etc.).

The ratio, expressed as a percentage, between the portion of the image that the photographer sees in the viewfinder (see above) and the image that is actually captured by the camera when shooting. Most often, it is specified as a percentage of the width and height of the frame, rather than the area.

Modern digital cameras often have viewfinders with a frame coverage of less than 100% - thus, the frame includes not only the visible scene, but also some space beyond its edges. This creates some inconveniences - in particular, it may be necessary to crop the photo to ensure a pre-conceived composition. Therefore, a viewfinder with 100% coverage is still considered the ideal option. Some time ago, such systems were found mainly in premium cameras, but now, thanks to cheaper prices and technological developments, they can be installed even in relatively inexpensive amateur compacts (see "Product type").